MK9173-15CS08

MK9173-15CS08 Datasheet

MK9173-01/-15

Part	Datasheet
MK9173-15CS08	MK9173-15CS08 (pdf)

Related Parts	Information
MK9173-15CS08LFT	MK9173-15CS08LFT
MK9173-15CS08LF	MK9173-15CS08LF
MK9173-01CS08T	MK9173-01CS08T
MK9173-01CS08	MK9173-01CS08
MK9173-15CS08T	MK9173-15CS08T

PDF Datasheet Preview
VIDEO GENLOCK PLL DATASHEET MK9173-01/-15 The MK9173-01/-15 provide the analog PLL circuit blocks to implement a frequency multiplier. Because the device is configured to use an external divider in the PLL clock feedback path, a large divider can be used to result in a large frequency multiplication ratio. This is useful when using a low frequency input clock to generate a high frequency output clock. The MK9173-01/-15 contains a phase detector, charge pump, loop filter, and voltage-controlled oscillator VCO . The ICS674-01 can be used as the external feedback divider. A common application of the MK9173-01/-15 is the implementation of a video genlock circuit. Because of this, the MK9173-01/-15 inputs operate on the negative-going clock edge. The MK9173-01/-15 is pin and function compatible to the AV9173-01/15. • Phase-detector/VCO circuit block • Ideal for genlock system • Reference clock range 12 kHz to 1 MHz for full output clock range • Output clock range of to 75 MHz -01 , and to MHz See “Allowable Input Frequency to Output Frequency” table for conditions • On-chip loop filter • Single 5 V power supply • Low power CMOS technology • 8-pin SOIC package • For new video genlock applications, please refer to the ICS673-01, ICS1522 or ICS1523. Block Diagram IDT VIDEO GENLOCK PLL MK9173-01/-15 VIDEO GENLOCK PLL Pin Assignment CLOCK SYNTHESIZER FBIN 1 IN 2 GND 3 FS0 4 8 CLK2 7 VDD 6 CLK1 5 OE 8 pin SOIC Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 Pin Name FBIN IN GND FS0 OE CLK1 VDD CLK2 Pin Type Pin Description Input Feedback input. Input for reference sync pulse. Power Ground. Input Frequency select 0 input. Input Output enable. Output Clock output Power supply +5 V . Output Clock output Allowable Input Frequency to Output Frequency for MK9173-01 in MHz MK9173-15 outputs run at exactly half of the MK9173-01 frequencies fIN kHz 12 < fIN < 14 kHz 14 < fIN < 17 kHz 17 < fIN < 30 kHz 30 < fIN < 35 kHz 35 < fIN < 1000 kHz Ordering Information A1 -C- SEATING PLANE h x 45 Part / Order Number MK9173-01CS08 MK9173-01CS08T MK9173-15CS08 see note below MK9173-15CS08T see note below AV9173-15CS08 see note below AV9173-15CS08T see note below Marking MK73-1 MK73-1 MK73-15 MK73-15 AV73-15 AV73-15 Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C Note the AV9173-15CS08 and the MK9173-15CS08 use the same die. Both part numbers are active and orderable. Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT VIDEO GENLOCK PLL MK9173-01/-15 VIDEO GENLOCK PLL CLOCK SYNTHESIZER 12/21/06 Eliminated "Using the MK9173 to replace the AV9173" section updated template. IDT VIDEO GENLOCK PLL MK9173-01/-15 VIDEO GENLOCK PLL CLOCK SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 408-284-4522 Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

VIDEO GENLOCK PLL

DATASHEET

MK9173-01/-15

The MK9173-01/-15 provide the analog PLL circuit blocks to implement a frequency multiplier. Because the device is configured to use an external divider in the PLL clock feedback path, a large divider can be used to result in a large frequency multiplication ratio. This is useful when using a low frequency input clock to generate a high frequency output clock. The MK9173-01/-15 contains a phase detector, charge pump, loop filter, and voltage-controlled oscillator VCO . The ICS674-01 can be used as the external feedback divider.

A common application of the MK9173-01/-15 is the implementation of a video genlock circuit. Because of this, the MK9173-01/-15 inputs operate on the negative-going clock edge.

The MK9173-01/-15 is pin and function compatible to the AV9173-01/15.
• Phase-detector/VCO circuit block
• Ideal for genlock system
• Reference clock range 12 kHz to 1 MHz for full output
clock range
• Output clock range of to 75 MHz -01 , and to

MHz See “Allowable Input Frequency to Output Frequency” table for conditions
• On-chip loop filter
• Single 5 V power supply
• Low power CMOS technology
• 8-pin SOIC package
• For new video genlock applications, please refer to the

ICS673-01, ICS1522 or ICS1523.

Block Diagram

IDT VIDEO GENLOCK PLL

MK9173-01/-15 VIDEO GENLOCK PLL

Pin Assignment

CLOCK SYNTHESIZER

FBIN 1 IN 2

GND 3 FS0 4
8 CLK2 7 VDD 6 CLK1 5 OE
8 pin SOIC

Pin Descriptions

Pin Number
1 2 3 4 5 6 7 8

Pin Name

FBIN IN

GND FS0 OE CLK1 VDD CLK2

Pin Type

Pin Description

Input Feedback input.

Input for reference sync pulse.

Power Ground.

Input Frequency select 0 input.

Input Output enable.

Output Clock output

Power supply +5 V .

Output Clock output

Allowable Input Frequency to Output Frequency for MK9173-01 in MHz

MK9173-15 outputs run at exactly half of the MK9173-01 frequencies
fIN kHz
12 < fIN < 14 kHz 14 < fIN < 17 kHz 17 < fIN < 30 kHz 30 < fIN < 35 kHz 35 < fIN < 1000 kHz
Ordering Information

A1 -C-

SEATING PLANE
h x 45

Part / Order Number

MK9173-01CS08 MK9173-01CS08T MK9173-15CS08 see note below MK9173-15CS08T see note below AV9173-15CS08 see note below AV9173-15CS08T see note below

Marking

MK73-1 MK73-1 MK73-15 MK73-15 AV73-15 AV73-15

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C

Note the AV9173-15CS08 and the MK9173-15CS08 use the same die. Both part numbers are active and orderable.

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT VIDEO GENLOCK PLL

MK9173-01/-15 VIDEO GENLOCK PLL

CLOCK SYNTHESIZER
12/21/06 Eliminated "Using the MK9173 to replace the AV9173" section updated template.

IDT VIDEO GENLOCK PLL

MK9173-01/-15 VIDEO GENLOCK PLL

CLOCK SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
408-284-4522

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK9173-15CS08 Datasheet file may be downloaded here without warranties.

Datasheet ID: MK9173-15CS08 637491