MK5814STR

MK5814STR Datasheet

MK5814

Part	Datasheet
MK5814STR	MK5814STR (pdf)

Related Parts	Information
MK5814S	MK5814S

PDF Datasheet Preview
LOW EMI CLOCK GENERATOR DATASHEET MK5814 The MK5814 device generates a low EMI output clock from a clock or crystal input. The device is designed to dither a high emissions clock to lower EMI in consumer applications. Using ICS’ proprietary mix of analog and digital Phase Locked Loop PLL technology, the device spreads the frequency spectrum of the output and reduces the frequency amplitude peaks by several dB. The MK5814 offers both centered and down spread from a high-speed clock input. The multiplier is a fixed 4x. For different multiplier configurations, use the MK5811 1x or MK5812 2x . ICS offers many other clocks for computers and computer peripherals. Consult ICS when you need to remove crystals and oscillators from your board. Block Diagram • Packaged in 8-pin SOIC • Provides a spread spectrum output clock • Supports flat panel controllers • Accepts a clock or crystal input provides same frequency dithered output • Input frequency range of 4 to 32 MHz • Output frequency range of 16 to 128 MHz • 4X frequency multiplication • Center and down spread • Peak reduction by 8 dB to 16 dB typical on 3rd through 19th odd harmonics • Low EMI feature can be disabled • Includes power down • Operating voltage of V • Advanced, low-power CMOS process S1:0 2 Spread Direction FRSEL X1/CLK X2 Clock Buffer/ Crystal Ocsillator The crystal requires external capacitors for accurate tuning of the clock PLL Clock Synthesis and Spread Spectrum Circuitry SSCLK IDT / ICS LOW EMI CLOCK GENERATOR MK5814 MK5814 LOW EMI CLOCK GENERATOR Pin Assignment Spread Direction and Spread Percentage X1/ICLK 1 GND 2 S1 3 S0 4 8 X2 7 VDD 6 FRSEL 5 SSCLK 8-pin 150 mil SOIC Frequency Selection S1 S0 Pin 3 Pin 4 Spread Direction Center No Spread Down Spread Percentage 0 = connect to GND M = unconnected floating 1 = connect directly to VDD Product MK58111 MK58121 MK5814 FRSEL pin 6 Input Freq. Range Multiplier Output Freq. Range to MHz Ordering Information Part / Order Number Marking MK5814S MK5814STR MK5814SLF MK5814SLFTR 5814S 5814SL SEATING PLANE Shipping packaging Tubes Tape and Reel Tubes Tape and Reel h x 45 Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Inc. ICS assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. IDT / ICS LOW EMI CLOCK GENERATOR MK5814 MK5814 LOW EMI CLOCK GENERATOR SSCG Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support <product line email> <product line phone> Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW EMI CLOCK GENERATOR

DATASHEET

MK5814

The MK5814 device generates a low EMI output clock from a clock or crystal input. The device is designed to dither a high emissions clock to lower EMI in consumer applications. Using ICS’ proprietary mix of analog and digital Phase Locked Loop PLL technology, the device spreads the frequency spectrum of the output and reduces the frequency amplitude peaks by several dB. The MK5814 offers both centered and down spread from a high-speed clock input. The multiplier is a fixed 4x.

For different multiplier configurations, use the MK5811 1x or MK5812 2x .

ICS offers many other clocks for computers and computer peripherals. Consult ICS when you need to remove crystals and oscillators from your board.

Block Diagram
• Packaged in 8-pin SOIC
• Provides a spread spectrum output clock
• Supports flat panel controllers
• Accepts a clock or crystal input provides same
frequency dithered output
• Input frequency range of 4 to 32 MHz
• Output frequency range of 16 to 128 MHz
• 4X frequency multiplication
• Center and down spread
• Peak reduction by 8 dB to 16 dB typical on 3rd through
19th odd harmonics
• Low EMI feature can be disabled
• Includes power down
• Operating voltage of V
• Advanced, low-power CMOS process

S1:0 2 Spread Direction

FRSEL

X1/CLK X2

Clock Buffer/ Crystal Ocsillator

The crystal requires external capacitors for accurate tuning of the clock

PLL Clock Synthesis and Spread Spectrum Circuitry

SSCLK

IDT / ICS LOW EMI CLOCK GENERATOR

MK5814

MK5814 LOW EMI CLOCK GENERATOR

Pin Assignment

Spread Direction and Spread Percentage

X1/ICLK 1 GND 2 S1 3 S0 4
8 X2 7 VDD 6 FRSEL 5 SSCLK
8-pin 150 mil SOIC

Frequency Selection

S1 S0 Pin 3 Pin 4

Spread Direction

Center No Spread Down

Spread Percentage
0 = connect to GND

M = unconnected floating 1 = connect directly to VDD

Product MK58111 MK58121

MK5814

FRSEL pin 6

Input Freq. Range

Multiplier

Output Freq. Range
to MHz
Ordering Information

Part / Order Number

Marking

MK5814S MK5814STR MK5814SLF MK5814SLFTR
5814S 5814SL

SEATING PLANE

Shipping packaging

Tubes Tape and Reel

Tubes Tape and Reel
h x 45

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C

While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Inc. ICS assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments.

IDT / ICS LOW EMI CLOCK GENERATOR

MK5814

MK5814 LOW EMI CLOCK GENERATOR

SSCG

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
<product line email> <product line phone>

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK5814STR Datasheet file may be downloaded here without warranties.

Datasheet ID: MK5814STR 637483