MK3807-01RITR

MK3807-01RITR Datasheet

MK3807-01

Part	Datasheet
MK3807-01RITR	MK3807-01RITR (pdf)

Related Parts	Information
MK3807-01RI	MK3807-01RI

PDF Datasheet Preview
BUFFER/CLOCK DRIVER DATASHEET MK3807-01 The MK3807-01 is a low skew V, 1 to 10 fanout buffer. The large fanout from a single input line reduces loading on the input clock. The TTL level outputs reduce noise levels on the part. Typical applications are clock and signal distribution. Block Diagram • Packaged in 20-pin SSOP • Available in Pb lead free package • 1 to 10 fanout buffer • Maximum skew between outputs of same package • Maximum skew between outputs of different packages • Max propagation delay of ns • Operating voltage of V • Advanced, low power, CMOS process • Industrial temperature range -40° C to +85° C • Hysteresis on all inputs NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8 CLK9 CLK10 IDT BUFFER/CLOCK DRIVER MK3807-01 BUFFER/CLOCK DRIVER Pin Assignment IN GND CLK1 VDD CLK2 GND CLK3 VDD CLK4 GND 20 pin SSOP VDD CLK10 CLK9 GND CLK8 VDD CLK7 GND CLK6 CLK5 Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin Name IN GND CLK1 VDD CLK2 GND CLK3 VDD CLK4 GND CLK5 CLK6 GND CLK7 VDD CLK8 GND CLK9 CLK10 VDD Pin Type Input Power Output Power Output Power Output Power Output Power Output Power Output Power Output Power Output Power Clock input. Connect to ground. Clock output. Connect to V. Clock output. Connect to ground. Clock output. Connect to V. Clock output. Connect to ground. Clock output. Clock output. Connect to ground. Clock output. Connect to V. Clock output. Connect to ground. Clock output. Clock output. Connect to V. Pin Description FAN OUT BUFFER IDT BUFFER/CLOCK DRIVER MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER External Components The MK3807-01 requires a minimum number of external components for proper operation. Decoupling Capacitors Decoupling capacitors of 0.01µF must be connected between VDD and GND, as close to these pins as possible. For optimum device performance, the decoupling capacitors should be mounted on the component side of the PCB. Avoid the use of vias in the decoupling circuit. Series Termination Resistor Ordering Information E1 E A Symbol A A1 A2 b C D E E1 e L α Basic Basic For reference only. Controlling dimensions in mm. SEATING PLANE L Part / Order Number MK3807-01RI MK3807-01RITR* MK3807-01RILF MK3807-01RILFTR Marking MK3807-01RI MK3807-01RI 3807-01RILF 3807-01RILF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP Temperature -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT BUFFER/CLOCK DRIVER MK3807-01 BUFFER/CLOCK DRIVER FAN OUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

BUFFER/CLOCK DRIVER

DATASHEET

MK3807-01

The MK3807-01 is a low skew V, 1 to 10 fanout buffer. The large fanout from a single input line reduces loading on the input clock. The TTL level outputs reduce noise levels on the part. Typical applications are clock and signal distribution.

Block Diagram
• Packaged in 20-pin SSOP
• Available in Pb lead free package
• 1 to 10 fanout buffer
• Maximum skew between outputs of same package
• Maximum skew between outputs of different packages
• Max propagation delay of ns
• Operating voltage of V
• Advanced, low power, CMOS process
• Industrial temperature range -40° C to +85° C
• Hysteresis on all inputs

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

CLK1 CLK2 CLK3

CLK4

CLK5

CLK6

CLK7

CLK8

CLK9

CLK10

IDT BUFFER/CLOCK DRIVER

MK3807-01 BUFFER/CLOCK DRIVER

Pin Assignment

IN GND CLK1 VDD CLK2 GND CLK3 VDD CLK4 GND
20 pin SSOP

VDD CLK10 CLK9 GND CLK8 VDD CLK7 GND CLK6 CLK5

Pin Descriptions

Pin Number
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pin Name

IN GND CLK1 VDD CLK2 GND CLK3 VDD CLK4 GND CLK5 CLK6 GND CLK7 VDD CLK8 GND CLK9 CLK10 VDD

Pin Type

Input Power Output Power Output Power Output Power Output Power Output Power Output Power Output Power Output Power

Clock input. Connect to ground. Clock output. Connect to V. Clock output. Connect to ground. Clock output. Connect to V. Clock output. Connect to ground. Clock output. Clock output. Connect to ground. Clock output. Connect to V. Clock output. Connect to ground. Clock output. Clock output. Connect to V.

Pin Description

FAN OUT BUFFER

IDT BUFFER/CLOCK DRIVER

MK3807-01 BUFFER/CLOCK DRIVER

FAN OUT BUFFER

External Components

The MK3807-01 requires a minimum number of external components for proper operation.

Decoupling Capacitors

Decoupling capacitors of 0.01µF must be connected between VDD and GND, as close to these pins as possible. For optimum device performance, the decoupling capacitors should be mounted on the component side of the PCB. Avoid the use of vias in the decoupling circuit.

Series Termination Resistor
Ordering Information

E1 E A

Symbol A A1 A2 b C D E E1 e L α

Basic

Basic
*For reference only. Controlling dimensions in mm.

SEATING

PLANE L

Part / Order Number

MK3807-01RI* MK3807-01RITR* MK3807-01RILF MK3807-01RILFTR

Marking

MK3807-01RI MK3807-01RI 3807-01RILF 3807-01RILF

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
20-pin SSOP 20-pin SSOP 20-pin SSOP 20-pin SSOP

Temperature
-40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT BUFFER/CLOCK DRIVER

MK3807-01 BUFFER/CLOCK DRIVER

FAN OUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK3807-01RITR Datasheet file may be downloaded here without warranties.

Datasheet ID: MK3807-01RITR 637480