MK2069-01GI

MK2069-01GI Datasheet

MK2069-01

Part	Datasheet
MK2069-01GI	MK2069-01GI (pdf)

Related Parts	Information
MK2069-01GITR	MK2069-01GITR

PDF Datasheet Preview
VCXO-BASED LINE CARD CLOCK SYNCHRONIZER DATASHEET MK2069-01 The MK2069-01 is a VCXO Voltage Controlled Crystal Oscillator based clock generator that offers system synchronization, jitter attenuation, and frequency multiplication or translation. It can accept an unstable, jittery input clock and provide a de-jittered, low phase noise output clock at a user determined frequency. The device’s clock multiplication ratios are user selectable since all major PLL divider blocks can be configured through device pin settings. External PLL loop filter components allow tailoring of the VCXO PLL loop response and therefore the clock jitter attenuation characteristics. The MK2069-01 is ideal for line card applications. Its three input MUX enables selection of the master or slave backup system clocks, as well as a backup local line card clock. The lock detector LD output serves as a clock status monitor. The clear CLR input enables rapid synchronization to the phase of a newly selected input clock, while eliminating the generation of extra clock cycles and wander caused by memory in the PLL feedback divider. CLR also serves as a temporary holdover function when kept low. Block Diagram • Input clock frequency of 1 kHz to 170 MHz • Output clock frequency of 500 kHz to 160 MHz • Jitter attenuation of input clock provided by VCXO circuit. Jitter transfer characteristics user configured through selection of external loop filter components. • 3:1 Input MUX for input reference clocks • PLL lock status output • PLL Clear function allows seamless synchronizing to an altered input clock phase, virtually eliminating the generation of wander or extra clock cycles. • VCXO-based clock generation offers very low jitter and phase noise generation, even with a low frequency or jittery input clock. • 2nd PLL provides translation of VCXO PLL output VCLK to higher or alternate clock frequencies TCLK . • Device will free-run in the absence of an input clock based on the VCXO crystal frequency. • 56 pin TSSOP package • Single V power supply • 5 V tolerant inputs on ICLK0 and ICLK1 NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 R V 1 :0 2 ISET P u lla b le xtal SV2:0 LFR X1 R T 1 :0 2 ST1:0 2 IC L K 0 IC L K 1 IC L K 2 0X RV D iv id e r 1,2,4,128 01 Phase D e te c to r 2 M X 1:0 VCXO PLL VCXO Charge Pump FV Divider 1-4096 SV D iv id e r 1,2,4,6,8, 10,12,16 RT D iv id e r ST D iv id e r 2,4,8,16 T ra n s la to r PLL FT Divider 1-64 Lock Detector Ordering Information Part / Order Number MK2069-01GI* MK2069-01GITR* MK2069-01GILF MK2069-01GILFTR Marking MK2069-01GI MK2069-01GI MK2069-01GILF MK2069-01GILF Shipping packaging Tubes Tape and Reel Tubes Tape and Reel Package 56 pin TSSOP 56 pin TSSOP 56 pin TSSOP 56 pin TSSOP Temperature -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT VCXO-BASED LINE CARD CLOCK SYNCHRONIZER MK2069-01 VCXO-BASED LINE CARD CLOCK SYNCHRONIZER VCXO AND SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

VCXO-BASED LINE CARD CLOCK SYNCHRONIZER

DATASHEET

MK2069-01

The MK2069-01 is a VCXO Voltage Controlled Crystal Oscillator based clock generator that offers system synchronization, jitter attenuation, and frequency multiplication or translation. It can accept an unstable, jittery input clock and provide a de-jittered, low phase noise output clock at a user determined frequency. The device’s clock multiplication ratios are user selectable since all major PLL divider blocks can be configured through device pin settings. External PLL loop filter components allow tailoring of the VCXO PLL loop response and therefore the clock jitter attenuation characteristics.

The MK2069-01 is ideal for line card applications. Its three input MUX enables selection of the master or slave backup system clocks, as well as a backup local line card clock. The lock detector LD output serves as a clock status monitor. The clear CLR input enables rapid synchronization to the phase of a newly selected input clock, while eliminating the generation of extra clock cycles and wander caused by memory in the PLL feedback divider. CLR also serves as a temporary holdover function when kept low.

Block Diagram
• Input clock frequency of 1 kHz to 170 MHz
• Output clock frequency of 500 kHz to 160 MHz
• Jitter attenuation of input clock provided by VCXO circuit.

Jitter transfer characteristics user configured through selection of external loop filter components.
• 3:1 Input MUX for input reference clocks
• PLL lock status output
• PLL Clear function allows seamless synchronizing to an
altered input clock phase, virtually eliminating the generation of wander or extra clock cycles.
• VCXO-based clock generation offers very low jitter and
phase noise generation, even with a low frequency or jittery input clock.
• 2nd PLL provides translation of VCXO PLL output

VCLK to higher or alternate clock frequencies TCLK .
• Device will free-run in the absence of an input clock
based on the VCXO crystal frequency.
• 56 pin TSSOP package
• Single V power supply
• 5 V tolerant inputs on ICLK0 and ICLK1

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

R V 1 :0 2

ISET

P u lla b le xtal

SV2:0

LFR X1

R T 1 :0 2

ST1:0 2

IC L K 0 IC L K 1 IC L K 2
0X RV

D iv id e r
1,2,4,128 01

Phase D e te c to r
2 M X 1:0

VCXO PLL

VCXO Charge Pump

FV Divider 1-4096

SV D iv id e r 1,2,4,6,8, 10,12,16

RT D iv id e r

ST D iv id e r 2,4,8,16

T ra n s la to r PLL

FT Divider 1-64

Lock Detector
Ordering Information

Part / Order Number

MK2069-01GI* MK2069-01GITR* MK2069-01GILF MK2069-01GILFTR

Marking

MK2069-01GI MK2069-01GI MK2069-01GILF MK2069-01GILF

Shipping packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
56 pin TSSOP 56 pin TSSOP 56 pin TSSOP 56 pin TSSOP

Temperature
-40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT VCXO-BASED LINE CARD CLOCK SYNCHRONIZER

MK2069-01 VCXO-BASED LINE CARD CLOCK SYNCHRONIZER

VCXO AND SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK2069-01GI Datasheet file may be downloaded here without warranties.

Datasheet ID: MK2069-01GI 637453