MK1709AGT

MK1709AGT Datasheet

MK1709

Part	Datasheet
MK1709AGT	MK1709AGT (pdf)

Related Parts	Information
MK1709STR	MK1709STR
MK1709S	MK1709S
MK1709AG	MK1709AG

PDF Datasheet Preview
LOW EMI CLOCK GENERATOR DATASHEET MK1709 The MK1709 generates a low EMI output clock from a clock input. The part is designed to dither the LCD interface clock for flat panel graphics controllers. The device uses IDT’s proprietary mix of analog and digital Phase Locked Loop PLL technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB. The MK1709 offers centered spread from a high speed clock input. Refer to the MK1714-01/02 for a crystal input and the widest selection of input frequencies and multipliers. IDT offers many other clocks for computers and computer peripherals. Consult us when you need to remove crystals and oscillators from your board. Block Diagram • Packaged in 8-pin SOIC MK1709S and in 8-pin TSSOP MK1709AG • Available in lead Pb free package • Provides a spread spectrum output clock • Supports flat panel controllers • Guaranteed to +85° C operation • Accepts a clock input, provides same frequency dithered output • Good for all VGA modes from 40 to 167 MHz • Peak reduction by 7dB - 14dB typical on 3rd - 19th odd harmonics • Low EMI feature can be disabled • Includes power-down • Operating voltage of V • Advanced, low-power CMOS process NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 S0 S1 S2 Low EMI Enable ICLK Input Buffer PLL Clock Synthesis and Spread Spectrum Circuitry Clock Out IDT VBLOW EMI CLOCK GENERATOR MK1709 MK1709 LOW EMI CLOCK GENERATOR Pin Assignment ICLK 1 VDD 2 GND 3 CLK 4 8 S2 7 S1 6 S0 5 LEE 8-pin SOIC MK1709S GND 1 CLK 2 LEE 3 7 ICLK 8-pin TSSOP MK1709AG SSCG Spread Percentage and Direction Select Table Pin 8 Pin 7 Pin 6 1709S Pin 6 Pin 5 Pin 4 1709AG Frequency Spread Range Percentage % Ordering Information A A1 A2 b C D E E1 e L α aaa SEATING PLANE aaa C BASIC Basic BASIC Basic Part / Order Number MK1709S* MK1709STR* MK1709SLF MK1709SLFTR MK1709AG* MK1709AGTR* MK1709AGLF MK1709AGLFTR Marking see page 7 Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP Temperature 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT LOW EMI CLOCK GENERATOR MK1709 MK1709 LOW EMI CLOCK GENERATOR SSCG Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW EMI CLOCK GENERATOR

DATASHEET

MK1709

The MK1709 generates a low EMI output clock from a clock input. The part is designed to dither the LCD interface clock for flat panel graphics controllers. The device uses IDT’s proprietary mix of analog and digital Phase Locked Loop PLL technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB.

The MK1709 offers centered spread from a high speed clock input. Refer to the MK1714-01/02 for a crystal input and the widest selection of input frequencies and multipliers.

IDT offers many other clocks for computers and computer peripherals. Consult us when you need to remove crystals and oscillators from your board.

Block Diagram
• Packaged in 8-pin SOIC MK1709S and in 8-pin TSSOP

MK1709AG
• Available in lead Pb free package
• Provides a spread spectrum output clock
• Supports flat panel controllers
• Guaranteed to +85° C operation
• Accepts a clock input, provides same frequency dithered
output
• Good for all VGA modes from 40 to 167 MHz
• Peak reduction by 7dB - 14dB typical on 3rd - 19th odd
harmonics
• Low EMI feature can be disabled
• Includes power-down
• Operating voltage of V
• Advanced, low-power CMOS process

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

S0 S1 S2 Low EMI Enable

ICLK

Input Buffer

PLL Clock Synthesis and Spread Spectrum Circuitry

Clock Out

IDT VBLOW EMI CLOCK GENERATOR

MK1709

MK1709 LOW EMI CLOCK GENERATOR

Pin Assignment

ICLK 1 VDD 2 GND 3 CLK 4
8 S2 7 S1 6 S0 5 LEE
8-pin SOIC MK1709S

GND 1 CLK 2 LEE 3
7 ICLK
8-pin TSSOP MK1709AG

SSCG

Spread Percentage and Direction Select Table

Pin 8

Pin 7

Pin 6
1709S

Pin 6

Pin 5

Pin 4
1709AG

Frequency Spread Range Percentage %
Ordering Information

A A1 A2 b C D E E1 e L α aaa

SEATING PLANE
aaa C

BASIC

Basic

BASIC

Basic

Part / Order Number

MK1709S* MK1709STR* MK1709SLF MK1709SLFTR MK1709AG* MK1709AGTR* MK1709AGLF MK1709AGLFTR

Marking
see page 7

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP

Temperature
0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C 0 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT LOW EMI CLOCK GENERATOR

MK1709

MK1709 LOW EMI CLOCK GENERATOR

SSCG

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK1709AGT Datasheet file may be downloaded here without warranties.

Datasheet ID: MK1709AGT 637444