M695SDM-T07

M695SDM-T07 Datasheet

M695SDM

Part	Datasheet
M695SDM-T07	M695SDM-T07 (pdf)

PDF Datasheet Preview
M695SDM Design Target M695SDM Voltage Controlled SAW Oscillator The M695SDM Voltage Controlled SAW Oscillator VCSO is a single output low noise oscillator that incorporates an analog X2 frequency multiplier to provide an output frequency that is twice that of the fundamental VCSO frequency. The M695SDM makes use of IDT’s RF circuit design capability and SAW technology to provide a high level of performance. The fundamental frequency VCSO is implemented as a discrete circuit with varactor tuning to give the lowest possible phase noise. A SAW quartz delay line is the frequency controlling element in the oscillator resulting in low phase noise, temperature stability, and a repeatable linear tuning characteristic. An RF transistor is used for frequency multiplication. The M695SDM VCSO is manufactured on a 13x20 mm FR4 PCB. A Metal cover is used to protect the circuitry and provide RF shielding. • Low jitter o 20 fs rms from 10 kHz to 50 MHz • 13x20 mm Surface Mount FR4 PCB • +5.0V Power Supply • RoHS Compliant • Frequency Translation • De-jitter Phase Lock Loop Applications • Clock and Data Retiming • Low Noise Clocks ABSOLUTE MAX RATINGS Operating Temperature -20°C to 85°C Storage Temperature -55°C to 125°C Power Supply Voltage 5.5V Tuning Voltage -0.5V to +5.5V Integrated Device Tech, Inc 400 DJL Blvd Marlborough, MA 01752 tel 774-348-1600 M695SDM Design Target SPECIFICATIONS Specifications apply at Vcc =5.0V and Tcase = 25°C unless otherwise specified Parameter Center Frequency Range Tuning Range Minimum 1500 Typical Maximum 2100 Units MHz ppm Notes Other frequencies available Vtune = 0.0V to 5.0V ± 50 Temperature Stability ppm p-p -20°C to 85°C Power supply Pushing ppm/V Vcc = 5.0V ± Kvco Tuning Linearity Output Power ppm/V Deviation from best linear fit dBm load Harmonic Spurious Sub-harmonic Spurious Non-harmonic Spurious Ordering Information Part Numbering Scheme Part Number: Device Number Output Frequency Code M695SDM XXX Output Frequencies & Order Codes Output Frequency Output Frequency Code Consult IDT for availability of other frequencies M695SDM Design Target Integrated Device Tech, Inc 400 DJL Blvd Marlborough, MA 01752 tel 774-348-1600

PDF Datasheet Preview

M695SDM

Design Target

M695SDM Voltage Controlled SAW Oscillator

The M695SDM Voltage Controlled SAW Oscillator VCSO is a single output low noise oscillator that incorporates an analog X2 frequency multiplier to provide an output frequency that is twice that of the fundamental VCSO frequency.

The M695SDM makes use of IDT’s RF circuit design capability and SAW technology to provide a high level of performance. The fundamental frequency VCSO is implemented as a discrete circuit with varactor tuning to give the lowest possible phase noise. A SAW quartz delay line is the frequency controlling element in the oscillator resulting in low phase noise, temperature stability, and a repeatable linear tuning characteristic. An RF transistor is used for frequency multiplication.

The M695SDM VCSO is manufactured on a 13x20 mm FR4 PCB. A Metal cover is used to protect the circuitry and provide RF shielding.
• Low jitter o 20 fs rms from 10 kHz to 50 MHz
• 13x20 mm Surface Mount FR4 PCB
• +5.0V Power Supply
• RoHS Compliant
• Frequency Translation
• De-jitter Phase Lock Loop Applications
• Clock and Data Retiming
• Low Noise Clocks

ABSOLUTE MAX RATINGS

Operating Temperature -20°C to 85°C Storage Temperature -55°C to 125°C Power Supply Voltage 5.5V

Tuning Voltage -0.5V to +5.5V

Integrated Device Tech, Inc 400 DJL Blvd Marlborough, MA 01752 tel 774-348-1600

M695SDM

Design Target

SPECIFICATIONS

Specifications apply at Vcc =5.0V and Tcase = 25°C unless otherwise specified

Parameter

Center Frequency Range Tuning Range

Minimum
1500

Typical

Maximum
2100

Units

MHz ppm

Notes

Other frequencies available

Vtune = 0.0V to 5.0V
± 50

Temperature Stability
ppm p-p -20°C to 85°C

Power supply Pushing
ppm/V Vcc = 5.0V ±

Kvco Tuning Linearity Output Power
ppm/V

Deviation from best linear fit
dBm load

Harmonic Spurious

Sub-harmonic Spurious

Non-harmonic Spurious
Ordering Information

Part Numbering Scheme Part Number:

Device Number Output Frequency Code

M695SDM XXX

Output Frequencies & Order Codes

Output Frequency Output Frequency

Code

Consult IDT for availability of other frequencies

M695SDM

Design Target

Integrated Device Tech, Inc 400 DJL Blvd Marlborough, MA 01752 tel 774-348-1600

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M695SDM-T07 Datasheet file may be downloaded here without warranties.

Datasheet ID: M695SDM-T07 637421