M2004-01I622.0800

M2004-01I622.0800 Datasheet

M2004-01/-11

Part	Datasheet
M2004-01I622.0800	M2004-01I622.0800 (pdf)

Related Parts	Information
M2004-01-622.0800T	M2004-01-622.0800T
M2004-01I640.0000	M2004-01I640.0000
M2004-01I625.0000T	M2004-01I625.0000T
M2004-01I640.0000T	M2004-01I640.0000T
M2004-01I625.0000	M2004-01I625.0000
M2004-01I400.0000T	M2004-01I400.0000T
M2004-01I400.0000	M2004-01I400.0000
M2004-01-644.5313T	M2004-01-644.5313T
M2004-01-644.5313	M2004-01-644.5313
M2004-01-625.0000	M2004-01-625.0000
M2004-01-622.0800	M2004-01-622.0800
M2004-01I622.0800T	M2004-01I622.0800T
M2004-01-625.0000T	M2004-01-625.0000T
M2004-01-666.5140T	M2004-01-666.5140T
M2004-01-666.5140	M2004-01-666.5140

PDF Datasheet Preview
Integrated Circuit Systems, Inc. M2004-01/-11 FREQUENCY TRANSLATION PLL The M2004 variants -01 and -11 are VCSO Voltage Controlled SAW Oscillator based clock generator PLLs designed for clock frequency translation and jitter attenuation in a high-speed data communications system. The clock multiplication ratio and output divider ratio are pin selectable and also configurable through serial programming. External loop components allow the tailoring of PLL loop response. The M2004-11 adds Hitless Switching with Phase Build-out HS/PBO to ensure that reference clock reselection does not disrupt the output clock. Also read about device variants -21, -31, -41, and -51 in the M2004-x1 Preliminary Information sheet. PIN ASSIGNMENT 9 x 9 mm SMT S_DATA S_LOAD nP_LOAD REF_CLK1 REF_CLK0 REF_SEL M1 M2 M3 M4 M5 VCC DNC 30 M 2 0 4 - 0 1 16 32 M 2 0 4 - 1 14 Top View S_CLOCK MR nFOUT FOUT GND N1 N0 VCC GND nOP_IN OP_OUT nOP_OUT OP_IN Ideal for OC-48/192 data clock Integrated SAW surface acoustic wave delay line VCSO frequency from 300 to 700MHz Specify VCSO center frequency at time of order Low phase jitter of < 0.5ps rms, typical 12kHz to 20MHz or 50kHz to 80MHz Pin-selectable or serially programmed configuration The M2004-11 adds Hitless Switching with Phase Build-out HS/PBO to ensure SONET/SDH MTIE and TDEV compliance during reference clock reselection Reference clock inputs support single-ended LVCMOS, LVTTL Industrial temperature available Single 3.3V power supply Small 9 x 9 mm SMT surface mount package SIMPLIFIED BLOCK DIAGRAM Figure 1 Pin Assignment Example Input / Output Frequency Combinations Input Clock VCSO 1 Output MHz Freq MHz Freq MHz Application OC-12 / 48 /192 Gigabit Ethernet Table 1 Example Input / Output Frequency Combinations Note 1 Specify VCSO center frequency at time of order REF_CLK1 REF_CLK0 ORDERING INFORMATION Part Number: M2004- x1 - xxx.xxxx Device Variant Added Features Feature Key none base -11 HS/PBO Fixed NBW -31 HS/PBO Fixed NBW -41 HS/PBO -51 HS/PBO Fixed NBW Temperature See M2004-x1 Preliminary Information HS/PBO = Hitless Switching with Phase Build-out “- ” = 0 to +70 oC commercial I = - 40 to +85 oC industrial Frequency MHz Consult ICS for available VCSO frequencies Figure 12 Ordering Information Example Part Numbers For VCSO Freq MHz Temperature commercial industrial M2004-01- or M2004-11- M2004-01I or M2004-11I Table 13 Example Part Numbers Consult ICS for the availability of other VCSO frequencies. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems ICS assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. M2004-01/-11 Datasheet Rev 10 of 10 Integrated Circuit Systems, Inc. ● Communications Modules ● ● tel 508 852-5400

PDF Datasheet Preview

Integrated Circuit Systems, Inc.

M2004-01/-11

FREQUENCY TRANSLATION PLL

The M2004 variants -01 and -11 are VCSO Voltage Controlled SAW Oscillator based clock generator PLLs designed for clock frequency translation and jitter attenuation in a high-speed data communications system. The clock multiplication ratio and output divider ratio are pin selectable and
also configurable through serial programming. External loop components allow the tailoring of PLL loop response. The M2004-11 adds Hitless Switching with Phase Build-out HS/PBO to ensure that reference clock reselection does not disrupt the output clock.

Also read about device variants -21, -31, -41, and -51 in the M2004-x1 Preliminary Information sheet.

PIN ASSIGNMENT 9 x 9 mm SMT

S_DATA

S_LOAD
nP_LOAD

REF_CLK1

REF_CLK0

REF_SEL

M1 M2 M3 M4 M5 VCC DNC
30 M 2 0 4 - 0 1 16
32 M 2 0 4 - 1 14

Top View

S_CLOCK MR nFOUT FOUT GND N1 N0 VCC GND
nOP_IN

OP_OUT
nOP_OUT

OP_IN

Ideal for OC-48/192 data clock Integrated SAW surface acoustic wave delay line VCSO frequency from 300 to 700MHz

Specify VCSO center frequency at time of order

Low phase jitter of < 0.5ps rms, typical 12kHz to 20MHz or 50kHz to 80MHz

Pin-selectable or serially programmed configuration The M2004-11 adds Hitless Switching with Phase

Build-out HS/PBO to ensure SONET/SDH MTIE and TDEV compliance during reference clock reselection

Reference clock inputs support single-ended LVCMOS, LVTTL

Industrial temperature available Single 3.3V power supply Small 9 x 9 mm SMT surface mount package

SIMPLIFIED BLOCK DIAGRAM

Figure 1 Pin Assignment

Example Input / Output Frequency Combinations

Input Clock VCSO 1

Output

MHz Freq MHz Freq MHz

Application

OC-12 / 48 /192

Gigabit Ethernet

Table 1 Example Input / Output Frequency Combinations

Note 1 Specify VCSO center frequency at time of order

REF_CLK1 REF_CLK0
ORDERING INFORMATION

Part Number:

M2004- x1 - xxx.xxxx

Device Variant

Added Features

Feature Key
none base
-11 HS/PBO

Fixed NBW
-31 HS/PBO Fixed NBW
-41 HS/PBO
-51 HS/PBO Fixed NBW

Temperature

See M2004-x1 Preliminary Information

HS/PBO = Hitless Switching with Phase Build-out
“- ” = 0 to +70 oC commercial I = - 40 to +85 oC industrial

Frequency MHz Consult ICS for available VCSO frequencies
Figure 12 Ordering Information

Example Part Numbers

For VCSO Freq MHz

Temperature
commercial industrial

M2004-01- or M2004-11- M2004-01I or M2004-11I

Table 13 Example Part Numbers

Consult ICS for the availability of other VCSO frequencies.

While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems ICS assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments.

M2004-01/-11 Datasheet Rev
10 of 10

Integrated Circuit Systems, Inc. ● Communications Modules ● ● tel 508 852-5400

More datasheets: DS1339C-33 | NM27LV010T250 | MP5011DQ-LF-Z | MP5011DQ-LF-P | ZL30158GGG20037 | M2004-01-622.0800T | M2004-01I640.0000 | M2004-01I625.0000T | M2004-01I640.0000T | M2004-01I625.0000

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M2004-01I622.0800 Datasheet file may be downloaded here without warranties.

Datasheet ID: M2004-01I622.0800 637414