23S09E-1DCGI

23S09E-1DCGI Datasheet

IDT23S09E 3.3V ZERO DELAY CLOCK BUFFER

Part	Datasheet
23S09E-1DCGI	23S09E-1DCGI (pdf)

Related Parts	Information
IDT23S09E-1DCG	IDT23S09E-1DCG
IDT23S09E-1DCI8	IDT23S09E-1DCI8
IDT23S09E-1HPGI	IDT23S09E-1HPGI
IDT23S09E-1HPGI8	IDT23S09E-1HPGI8
IDT23S09E-1HPG	IDT23S09E-1HPG
IDT23S09E-1HDCI8	IDT23S09E-1HDCI8
IDT23S09E-1HPG8	IDT23S09E-1HPG8
IDT23S09E-1HDCI	IDT23S09E-1HDCI
23S09E-1DCGI8	23S09E-1DCGI8
IDT23S09E-1DCG8	IDT23S09E-1DCG8
IDT23S09E-1DC8	IDT23S09E-1DC8
IDT23S09E-1DC	IDT23S09E-1DC
IDT23S09E-1DCI	IDT23S09E-1DCI

PDF Datasheet Preview
IDT23S09E 3.3V ZERO DELAY CLOCK BUFFER COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE IDT23S09E FEATURES: • Phase-Lock Loop Clock Distribution • 10MHz to 200MHz operating frequency • Distributes one clock input to one bank of five and one bank of four outputs • Separate output enable for each output bank • Output Skew < 250ps • Low jitter <200 ps cycle-to-cycle • IDT23S09E-1 for Standard Drive • IDT23S09E-1H for High Drive • No external RC network required • Operates at 3.3V VDD • Spread spectrum compatible • Available in SOIC and TSSOP packages NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 FUNCTIONAL BLOCK DIAGRAM DESCRIPTION: The IDT23S09E is a high-speed phase-lock loop PLL clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 200MHz. The IDT23S09E is a 16-pin version of the IDT23S05E. The IDT23S09E accepts one reference input, and drives two banks of four low skew clocks. The -1H version of this device operates up to 200MHz frequency and has higher drive than the -1 device. All parts have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. In the absence of an input clock, the IDT23S09E enters power down. In this mode, the device will draw less than 12µA for Commercial Temperature range and less than 25µA for Industrial temperature range, and the outputs are tri-stated. The IDT23S09E is characterized for both Industrial and Commercial operation. CLKOUT CLKA1 CLKA2 CLKA3 15 CLKA4 S2 8 S1 9 Control Logic The IDT logo is a registered trademark of Integrated Device Technology, Inc. COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 1 c 2006 Integrated Device Technology, Inc. CLKB1 CLKB2 CLKB3 CLKB4 AUGUST 2009 DSC - 6399/11 IDT23S09E 3.3V ZERO DELAY CLOCK BUFFER PIN CONFIGURATION CLKA1 CLKA2 CLKB1 CLKB2 16 CLKOUT 15 CLKA4 14 CLKA3 CLKB4 ORDERING INFORMATION Device Type Package Process COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES Blank I Commercial 0oC to +70oC Industrial -40oC to +85oC DC DCG PG PGG Small Outline SOIC - Green Thin Shrink Small Outline Package TSSOP - Green 23S09E-1 ZDerBo wDiethlaSy tCalnodcakrdBuDffreivrewith High Drive, 23S09E-1H ZSDprBeawditShpHeicgthruDmriCveompatible Spread Spectrum Compatible NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Part / Order Number Shipping Packaging Package Temperature 23S09E-1DC 23S09E-1DC8* 23S09E-1DCI* 23S09E-1DCI8* 23S09E-1HDC* 23S09E-1HDC8* 23S09E-1HDCI* 23S09E-1HDCI8* 23S09E-1HPG* 23S09E-1HPG8* 23S09E-1HPGI* 23S09E-1HPGI8* 23S09E-1DCG 23S09E-1DCG8 23S09E-1DCGI 23S09E-1DCGI8 23S09E-1HDCG 23S09E-1HDCG8 23S09E-1HDCGI 23S09E-1HDCGI8 23S09E-1HPGG 23S09E-1HPGG8 23S09E-1HPGGI 23S09E-1HPGGI8 Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775 for Tech Support:

PDF Datasheet Preview

IDT23S09E 3.3V ZERO DELAY CLOCK BUFFER

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM COMPATIBLE

IDT23S09E

FEATURES:
• Phase-Lock Loop Clock Distribution
• 10MHz to 200MHz operating frequency
• Distributes one clock input to one bank of five and one bank of
four outputs
• Separate output enable for each output bank
• Output Skew < 250ps
• Low jitter <200 ps cycle-to-cycle
• IDT23S09E-1 for Standard Drive
• IDT23S09E-1H for High Drive
• No external RC network required
• Operates at 3.3V VDD
• Spread spectrum compatible
• Available in SOIC and TSSOP packages

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

FUNCTIONAL BLOCK DIAGRAM

DESCRIPTION:

The IDT23S09E is a high-speed phase-lock loop PLL clock buffer, designed to address high-speed clock distribution applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 200MHz.

The IDT23S09E is a 16-pin version of the IDT23S05E. The IDT23S09E accepts one reference input, and drives two banks of four low skew clocks. The -1H version of this device operates up to 200MHz frequency and has higher drive than the -1 device. All parts have on-chip PLLs which lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. In the absence of an input clock, the IDT23S09E enters power down. In this mode, the device will draw less
than 12µA for Commercial Temperature range and less than 25µA for

Industrial temperature range, and the outputs are tri-stated. The IDT23S09E is characterized for both Industrial and Commercial
operation.

CLKOUT

CLKA1

CLKA2

CLKA3
15 CLKA4

S2 8 S1 9

Control Logic

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 1
c 2006 Integrated Device Technology, Inc.

CLKB1

CLKB2

CLKB3

CLKB4

AUGUST 2009

DSC - 6399/11

IDT23S09E 3.3V ZERO DELAY CLOCK BUFFER

PIN CONFIGURATION

CLKA1

CLKA2

CLKB1

CLKB2
16 CLKOUT
15 CLKA4
14 CLKA3

CLKB4
ORDERING INFORMATION

Device Type Package Process

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES

Blank I

Commercial 0oC to +70oC Industrial -40oC to +85oC

DC DCG PG PGG

Small Outline SOIC - Green Thin Shrink Small Outline Package TSSOP - Green
23S09E-1 ZDerBo wDiethlaSy tCalnodcakrdBuDffreivrewith High Drive, 23S09E-1H ZSDprBeawditShpHeicgthruDmriCveompatible

Spread Spectrum Compatible
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Part / Order Number Shipping Packaging

Package

Temperature
23S09E-1DC* 23S09E-1DC8* 23S09E-1DCI* 23S09E-1DCI8* 23S09E-1HDC* 23S09E-1HDC8* 23S09E-1HDCI* 23S09E-1HDCI8* 23S09E-1HPG* 23S09E-1HPG8* 23S09E-1HPGI* 23S09E-1HPGI8* 23S09E-1DCG 23S09E-1DCG8 23S09E-1DCGI 23S09E-1DCGI8 23S09E-1HDCG 23S09E-1HDCG8 23S09E-1HDCGI 23S09E-1HDCGI8 23S09E-1HPGG 23S09E-1HPGG8 23S09E-1HPGGI 23S09E-1HPGGI8

Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel
16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C

CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138
for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775
for Tech Support:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 23S09E-1DCGI Datasheet file may be downloaded here without warranties.

Datasheet ID: 23S09E-1DCGI 637257