IDT23S08-5HDC8

IDT23S08-5HDC8 Datasheet

IDT23S08 3.3V ZERO DELAY CLOCK MULTIPLIER

Part	Datasheet
IDT23S08-5HDC8	IDT23S08-5HDC8 (pdf)

Related Parts	Information
IDT23S08-5HDCGI8	IDT23S08-5HDCGI8
IDT23S08-3DC	IDT23S08-3DC
IDT23S08-5HPGG8	IDT23S08-5HPGG8
IDT23S08-5HPGG	IDT23S08-5HPGG
IDT23S08-5HDCGI	IDT23S08-5HDCGI
IDT23S08-5HDCG8	IDT23S08-5HDCG8
IDT23S08-5HDCG	IDT23S08-5HDCG
IDT23S08-5HDC	IDT23S08-5HDC
IDT23S08-4DCI8	IDT23S08-4DCI8
IDT23S08-4DCI	IDT23S08-4DCI
IDT23S08-4DC8	IDT23S08-4DC8
IDT23S08-4DC	IDT23S08-4DC
IDT23S08-3DCI8	IDT23S08-3DCI8
IDT23S08-3DC8	IDT23S08-3DC8
IDT23S08-1HDCI8	IDT23S08-1HDCI8
IDT23S08-1DC	IDT23S08-1DC
IDT23S08-1DC8	IDT23S08-1DC8
IDT23S08-1DCI	IDT23S08-1DCI
IDT23S08-1DCI8	IDT23S08-1DCI8
IDT23S08-1HDC	IDT23S08-1HDC
IDT23S08-3DCI	IDT23S08-3DCI
IDT23S08-1HDCI	IDT23S08-1HDCI
IDT23S08-2HDC8	IDT23S08-2HDC8
IDT23S08-2DC	IDT23S08-2DC
IDT23S08-2DC8	IDT23S08-2DC8
IDT23S08-2DCI	IDT23S08-2DCI
IDT23S08-2DCI8	IDT23S08-2DCI8
IDT23S08-2HDC	IDT23S08-2HDC
IDT23S08-1HDC8	IDT23S08-1HDC8

PDF Datasheet Preview
IDT23S08 3.3V ZERO DELAY CLOCK MULTIPLIER COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 3.3V ZERO DELAY CLOCK MULTIPLIER, SPREAD SPECTRUM COMPATIBLE IDT23S08 FEATURES: • Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 133MHz operating frequency • Distributes one clock input to two banks of four outputs • Separate output enable for each output bank • External feedback FBK pin is used to synchronize the outputs to the clock input • Output Skew <200 ps • Low jitter <200 ps cycle-to-cycle • 1x, 2x, 4x output options see table : IDT23S08-1 1x IDT23S08-2 1x, 2x IDT23S08-3 2x, 4x IDT23S08-4 2x IDT23S08-1H, -2H, and -5H for High Drive • No external RC network required • Operates at 3.3V VDD • Spread spectrum compatible • Available in SOIC and TSSOP packages NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 FUNCTIONAL BLOCK DIAGRAM DESCRIPTION: The IDT23S08 is a high-speed phase-lock loop PLL clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz. The IDT23S08 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the input clock directly drives the outputs for system testing purposes. In the absence of an input clock, the IDT23S08 enters power down. In this mode, the device will draw less than 12µA for Commercial Temperature range and less than 25µA for Industrial temperature range, and the outputs are tri-stated. The IDT23S08 is available in six unique configurations for both pre- scaling and multiplication of the Input REF Clock. See available options table. The PLL is closed externally to provide more flexibility by allowing the user to control the delay between the input clock and the outputs. The IDT23S08 is characterized for both Industrial and Commercial operation. -3, -4 2 CLKA1 3 CLKA2 14 CLKA3 15 CLKA4 S2 8 S1 9 Control Logic -2, -3 2 6 CLKB1 7 CLKB2 10 CLKB3 11 CLKB4 The IDT logo is a registered trademark of Integrated Device Technology, Inc. COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 1 c 2003 Integrated Device Technology, Inc. AUGUST 2009 DSC 6394/10 IDT23S08 3.3V ZERO DELAY CLOCK MULTIPLIER PIN CONFIGURATION CLKA1 CLKA2 CLKB1 CLKB2 ORDERING INFORMATION Device Type Package Process COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES Blank I DC DCG PG Commercial 0oC to +70oC Industrial -40oC to +85oC Small Outline SOIC - Green Thin Shrink Small Outline Package 23S08-1 23S08-2 23S08-3 Zero Delay Clock Buffer with Standard Drive, Spread Spectrum Compatible 23S08-4 23S08-1H Zero Delay Clock Buffer with High Drive, 23S08-2H Spread Spectrum Compatible 23S08-5H NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Part / Order Number Shipping Packaging Package Temperature 23S08-1DC 23S08-1DC8* 23S08-1DCI* 23S08-1DCI8* 23S08-1HDC* 23S08-1HDC8* 23S08-1HDCI* 23S08-1HDCI8* 23S08-2DC* 23S08-2DC8* 23S08-2DCI* 23S08-2DCI8* 23S08-2HDC* 23S08-2HDC8* 23S08-3DC* 23S08-3DC8* 23S08-4DCI* 23S08-4DCI8* 23S08-5HDC* 23S08-5HDC8* Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775 for Tech Support:

PDF Datasheet Preview

IDT23S08 3.3V ZERO DELAY CLOCK MULTIPLIER

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
3.3V ZERO DELAY CLOCK MULTIPLIER, SPREAD SPECTRUM COMPATIBLE

IDT23S08

FEATURES:
• Phase-Lock Loop Clock Distribution for Applications ranging from 10MHz to 133MHz operating frequency
• Distributes one clock input to two banks of four outputs
• Separate output enable for each output bank
• External feedback FBK pin is used to synchronize the outputs
to the clock input
• Output Skew <200 ps
• Low jitter <200 ps cycle-to-cycle
• 1x, 2x, 4x output options see table :

IDT23S08-1 1x IDT23S08-2 1x, 2x IDT23S08-3 2x, 4x IDT23S08-4 2x IDT23S08-1H, -2H, and -5H for High Drive
• No external RC network required
• Operates at 3.3V VDD
• Spread spectrum compatible
• Available in SOIC and TSSOP packages NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

FUNCTIONAL BLOCK DIAGRAM

DESCRIPTION:

The IDT23S08 is a high-speed phase-lock loop PLL clock multiplier. It is designed to address high-speed clock distribution and multiplication applications. The zero delay is achieved by aligning the phase between the incoming clock and the output clock, operable within the range of 10 to 133MHz.

The IDT23S08 has two banks of four outputs each that are controlled via two select addresses. By proper selection of input addresses, both banks can be put in tri-state mode. In test mode, the PLL is turned off, and the input clock directly drives the outputs for system testing purposes. In the absence of an input clock, the IDT23S08 enters power down. In this mode, the device will
draw less than 12µA for Commercial Temperature range and less than 25µA
for Industrial temperature range, and the outputs are tri-stated. The IDT23S08 is available in six unique configurations for both pre-
scaling and multiplication of the Input REF Clock. See available options table.

The PLL is closed externally to provide more flexibility by allowing the user to control the delay between the input clock and the outputs.

The IDT23S08 is characterized for both Industrial and Commercial operation.
-3, -4
2 CLKA1
3 CLKA2
14 CLKA3
15 CLKA4

S2 8 S1 9

Control Logic
-2, -3 2
6 CLKB1
7 CLKB2
10 CLKB3
11 CLKB4

The IDT logo is a registered trademark of Integrated Device Technology, Inc.

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES 1
c 2003 Integrated Device Technology, Inc.

AUGUST 2009

DSC 6394/10

IDT23S08 3.3V ZERO DELAY CLOCK MULTIPLIER

PIN CONFIGURATION

CLKA1

CLKA2

CLKB1

CLKB2
ORDERING INFORMATION

Device Type Package Process

COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES

Blank I

DC DCG PG

Commercial 0oC to +70oC Industrial -40oC to +85oC

Small Outline SOIC - Green Thin Shrink Small Outline Package
23S08-1
23S08-2
23S08-3

Zero Delay Clock Buffer with Standard Drive, Spread Spectrum Compatible
23S08-4
23S08-1H Zero Delay Clock Buffer with High Drive,
23S08-2H Spread Spectrum Compatible 23S08-5H
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Part / Order Number Shipping Packaging

Package

Temperature
23S08-1DC* 23S08-1DC8* 23S08-1DCI* 23S08-1DCI8* 23S08-1HDC* 23S08-1HDC8* 23S08-1HDCI* 23S08-1HDCI8* 23S08-2DC* 23S08-2DC8* 23S08-2DCI* 23S08-2DCI8* 23S08-2HDC* 23S08-2HDC8* 23S08-3DC* 23S08-3DC8* 23S08-4DCI* 23S08-4DCI8* 23S08-5HDC* 23S08-5HDC8*

Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel
16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C 0° to +70° C 0° to +70° C -40° to +85°C -40° to +85°C 0° to +70° C 0° to +70° C

CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138
for SALES 800-345-7015 or 408-284-8200 fax 408-284-2775
for Tech Support:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IDT23S08-5HDC8 Datasheet file may be downloaded here without warranties.

Datasheet ID: IDT23S08-5HDC8 637255