ICS853S314AGILF

ICS853S314AGILF Datasheet

ICS853S314I

Part	Datasheet
ICS853S314AGILF	ICS853S314AGILF (pdf)

Related Parts	Information
ICS853S314AGILFT	ICS853S314AGILFT
ICS853S314AFILF	ICS853S314AFILF
ICS853S314AFILFT	ICS853S314AFILFT

PDF Datasheet Preview
LOW SKEW, 1-TO-4 DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853S314I The ICS853S314I is a low skew 1-to-4 Differential Fanout Buffer, designed with clock distribution in HiPerClockS mind, accepting two clock sources into an input MUX. The MUX is controlled by a CLK_SEL pin. This makes the ICS853S314I very versatile, in that, it can operate as both a differential clock buffer as well as a signal-level translator and fanout buffer. The device is designed on a SiGe process and can operate at frequencies in excess of 2.7GHz. This ensures negligible jitter introduction to the timing budget which makes it an ideal choice for distributing high frequency, high precision clocks across back planes and boards in communication systems. Internal temperature compensation guarantees consistent performance across various platforms. • Four differential ECL/LVPECL level outputs • One differential ECL/LVPECL or single-ended input CLKA One differential HSTL or single-ended input CLKB • Maximum output frequency 2.7GHz • Additive phase jitter, RMS 0.138ps typical 156.25MHz, • Output skew 50ps maximum • Part-to-part skew 150ps maximum • LVPECL and HSTL mode operating voltage supply range: V = 2.5V±5% or 3.3V±5%, V = 0V ECL mode operating voltage supply range VEE = -3.3V±5% or -2.5V±5%, VCC = 0V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages BLOCK DIAGRAM CLKA nCLKA CLKB nCLKB CLK_SEL IDT / ICS 3.3V, 2.5V LVPECL/ECL FANOUT BUFFER PIN ASSIGNMENT Q0 nQ0 VCC 1 nc 2 20 VCC 19 Q0 VCC 3 18 nQ0 CLK_SEL 4 17 Q1 CLKA 5 16 nQ1 nCLKA 6 15 Q2 CLKB 7 14 nQ2 nCLKB 8 13 Q3 VEE 9 12 nQ3 VCC 10 11 VCC ICS853S314I TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 853S314AFI ICS853S314AI 20 lead SSOP tube -40°C to 85°C 853S314AFIT ICS853S314AI 20 lead SSOP 2500 tape & reel -40°C to 85°C 853S314AFILF ICS53S314AIL 20 lead "Lead-Free" SSOP tube -40°C to 85°C 853S314AFILFT ICS53S314AIL 20 lead "Lead-Free" SSOP 2500 tape & reel -40°C to 85°C 853S314AGI ICS53S14AGI 20 lead TSSOP tube -40°C to 85°C 853S314AGIT ICS53S14AGI 20 lead TSSOP 2500 tape & reel -40°C to 85°C 853S314AGILF ICS3S314AGIL 20 lead "Lead-Free" TSSOP tube -40°C to 85°C 853S314AGILFT Description of Change Ordering Information Table - Added "Lead-Free" Marking. Date 1/24/09 IDT / ICS 3.3V, 2.5V LVPECL/ECL FANOUT BUFFER ICS853S314I LOW SKEW, 1-TO-4 DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 For Tech Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2009 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, 1-TO-4 DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

ICS853S314I

The ICS853S314I is a low skew 1-to-4 Differential

Fanout Buffer, designed with clock distribution in

HiPerClockS mind, accepting two clock sources into an input

MUX. The MUX is controlled by a CLK_SEL pin.

This makes the ICS853S314I very versatile, in that,
it can operate as both a differential clock buffer as well as a
signal-level translator and fanout buffer.

The device is designed on a SiGe process and can operate at frequencies in excess of 2.7GHz. This ensures negligible jitter introduction to the timing budget which makes it an ideal choice for distributing high frequency, high precision clocks across back planes and boards in communication systems. Internal temperature compensation guarantees consistent performance across various platforms.
• Four differential ECL/LVPECL level outputs
• One differential ECL/LVPECL or single-ended input CLKA One differential HSTL or single-ended input CLKB
• Maximum output frequency 2.7GHz
• Additive phase jitter, RMS 0.138ps typical 156.25MHz,
• Output skew 50ps maximum
• Part-to-part skew 150ps maximum
• LVPECL and HSTL mode operating voltage supply range:

V = 2.5V±5% or 3.3V±5%, V = 0V

ECL mode operating voltage supply range VEE = -3.3V±5% or -2.5V±5%, VCC = 0V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

BLOCK DIAGRAM

CLKA nCLKA

CLKB nCLKB

CLK_SEL

IDT / ICS 3.3V, 2.5V LVPECL/ECL FANOUT BUFFER

PIN ASSIGNMENT

Q0 nQ0

VCC 1 nc 2
20 VCC 19 Q0

VCC 3
18 nQ0

CLK_SEL 4 17 Q1

CLKA 5 16 nQ1
nCLKA 6 15 Q2

CLKB 7 14 nQ2
nCLKB 8 13 Q3

VEE 9
12 nQ3

VCC 10 11 VCC

ICS853S314I
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature
853S314AFI

ICS853S314AI
20 lead SSOP
tube
-40°C to 85°C
853S314AFIT

ICS853S314AI
20 lead SSOP
2500 tape & reel
-40°C to 85°C
853S314AFILF

ICS53S314AIL
20 lead "Lead-Free" SSOP
tube
-40°C to 85°C
853S314AFILFT

ICS53S314AIL
20 lead "Lead-Free" SSOP
2500 tape & reel
-40°C to 85°C
853S314AGI

ICS53S14AGI
20 lead TSSOP
tube
-40°C to 85°C
853S314AGIT

ICS53S14AGI
20 lead TSSOP
2500 tape & reel
-40°C to 85°C
853S314AGILF

ICS3S314AGIL
20 lead "Lead-Free" TSSOP
tube
-40°C to 85°C
853S314AGILFT
Description of Change Ordering Information Table - Added "Lead-Free" Marking.

Date 1/24/09

IDT / ICS 3.3V, 2.5V LVPECL/ECL FANOUT BUFFER

ICS853S314I LOW SKEW, 1-TO-4 DIFFERENTIAL-TO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

For Tech Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2009 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853S314AGILF Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853S314AGILF 637172