ICS853210AYLFT

ICS853210AYLFT Datasheet

ICS853210

Part	Datasheet
ICS853210AYLFT	ICS853210AYLFT (pdf)

Related Parts	Information
ICS853210AYLF	ICS853210AYLF

PDF Datasheet Preview
LOW SKEW, DUAL, 1-TO-5, DIFFERENTIALTO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853210 The ICS853210 is a low skew, high performance dual 1-to-5 Differential-to-2.5V/3.3V LVPECL/ECL HiPerClockS F a n o u t B u f e r a n d a m e m b e r o f t h e HiPerClockS family of High Performance Clock Solutions from IDT. The ICS853210 is charac- terized to operate from either a 2.5V or a 3.3V power sup- ply. Guaranteed output and par t-to-par t skew character- istics make the ICS853210 ideal for those clock distribu- tion applications demanding well defined performance and repeatability. • Two differential 2.5V/3.3V LVPECL / ECL bank outputs • Two differential clock input pairs • PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Maximum output frequency >3GHz • Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLKx input • Output skew 13ps typical • Part-to-part skew 85ps typical • Propagation delay 485ps typical • LVPECL mode operating voltage supply range VCC = 2.375V to 3.8V, VEE = 0V • ECL mode operating voltage supply range: V = 0V, V = -2.375V to -3.8V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages BLOCK DIAGRAM PCLKA Pulldown nPCLKA Pullup/Pulldown PCLKB Pulldown nPCLKB Pullup/Pulldown QA0 nQA0 QA1 nQA1 QA2 nQA2 QA3 nQA3 QA4 nQA4 QB0 nQB0 QB1 nQB1 QB2 nQB2 QB3 nQB3 QB4 nQB4 PIN ASSIGNMENT QA3 nQA3 QA4 nQA4 QB0 nQB0 QB1 nQB1 VCCO nQA2 QA2 nQA1 QA1 nQA0 QA0 VCCO 24 23 22 21 20 19 18 17 28 ICS853210 13 123456 78 VCCO QB2 nQB2 QB3 nQB3 QB4 nQB4 VCCO TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature ICS853210AY ICS853210AY 32 Lead LQFP tray -40°C to 85°C ICS853210AYT ICS853210AY 32 Lead LQFP 1000 tape & reel -40°C to 85°C ICS853210AYLF ICS853210AYL 32 Lead "Lead-Free" LQFP tray -40°C to 85°C ICS853210AYLFT ICS853210AYL 32 Lead "Lead-Free" LQFP 1000 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuraiton and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 1-TO-5, 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853210 LOW SKEW, DUAL, 1-TO-5, DIFFERENTIAL-TO-2.5, 3.3V LVPECL/ECL FANOUT BUFFER 1 9 15 Description of Change Features Section - added lead-free bullet. Added Recommendations for Unused Input and Output Pins. Ordering Information Table - added lead-free part number, marking, and note. Date 10/23/06 IDT / ICS 1-TO-5, 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853210 LOW SKEW, DUAL, 1-TO-5, DIFFERENTIAL-TO-2.5, 3.3V LVPECL/ECL FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, DUAL, 1-TO-5, DIFFERENTIALTO-2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

ICS853210

The ICS853210 is a low skew, high performance
dual 1-to-5 Differential-to-2.5V/3.3V LVPECL/ECL

HiPerClockS F a n o u t B u f e r a n d a m e m b e r o f t h e

HiPerClockS family of High Performance Clock

Solutions from IDT. The ICS853210 is charac-
terized to operate from either a 2.5V or a 3.3V power sup-
ply. Guaranteed output and par t-to-par t skew character-
istics make the ICS853210 ideal for those clock distribu-
tion applications demanding well defined performance
and repeatability.
• Two differential 2.5V/3.3V LVPECL / ECL bank outputs
• Two differential clock input pairs
• PCLKx, nPCLKx pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL
• Maximum output frequency >3GHz
• Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLKx input
• Output skew 13ps typical
• Part-to-part skew 85ps typical
• Propagation delay 485ps typical
• LVPECL mode operating voltage supply range VCC = 2.375V to 3.8V, VEE = 0V
• ECL mode operating voltage supply range:

V = 0V, V = -2.375V to -3.8V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

BLOCK DIAGRAM

PCLKA Pulldown nPCLKA Pullup/Pulldown

PCLKB Pulldown nPCLKB Pullup/Pulldown

QA0 nQA0 QA1 nQA1

QA2 nQA2

QA3 nQA3 QA4 nQA4

QB0 nQB0 QB1 nQB1

QB2 nQB2

QB3 nQB3 QB4 nQB4

PIN ASSIGNMENT

QA3 nQA3 QA4 nQA4 QB0 nQB0 QB1 nQB1

VCCO nQA2 QA2 nQA1 QA1 nQA0 QA0 VCCO
24 23 22 21 20 19 18 17
28 ICS853210 13
123456 78

VCCO QB2 nQB2 QB3 nQB3 QB4 nQB4 VCCO
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature

ICS853210AY

ICS853210AY
32 Lead LQFP
tray
-40°C to 85°C

ICS853210AYT

ICS853210AY
32 Lead LQFP
1000 tape & reel -40°C to 85°C

ICS853210AYLF

ICS853210AYL
32 Lead "Lead-Free" LQFP
tray
-40°C to 85°C

ICS853210AYLFT

ICS853210AYL
32 Lead "Lead-Free" LQFP
1000 tape & reel
-40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuraiton and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS 1-TO-5, 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

ICS853210 LOW SKEW, DUAL, 1-TO-5, DIFFERENTIAL-TO-2.5, 3.3V LVPECL/ECL FANOUT BUFFER
1 9 15
Description of Change Features Section - added lead-free bullet. Added Recommendations for Unused Input and Output Pins. Ordering Information Table - added lead-free part number, marking, and note.

Date 10/23/06

IDT / ICS 1-TO-5, 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER

ICS853210 LOW SKEW, DUAL, 1-TO-5, DIFFERENTIAL-TO-2.5, 3.3V LVPECL/ECL FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853210AYLFT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853210AYLFT 637163