ICS853111AYLF

ICS853111AYLF Datasheet

ICS853111A

Part	Datasheet
ICS853111AYLF	ICS853111AYLF (pdf)

Related Parts	Information
ICS853111AYLFT	ICS853111AYLFT

PDF Datasheet Preview
LOW SKEW, 1-TO-10, DIFFERENTIAL-TOLVPECL/ECL FANOUT BUFFER ICS853111A The ICS853111A is a low skew, high perfor- mance 1-to-10 Differential-to-2.5V/3.3V LVPECL/ HiPerClockS E C L Fa n o u t B u f e r a n d a m e m b e r o f t h e HiPerClockS family of High Performance Clock Solutions from I DT. The ICS853111A is characterized to operate from either a 2.5V, 3.3V or a 5V power supply. Guaranteed output and par t-to-par t skew characteristics make the ICS853111A ideal for those clock distribution applications demanding well defined perfor- mance and repeatability. • Ten differential LVPECL outputs • Two selectable differential LVPECL PCLK/nPCLK clock inputs • PCLK, nPCLK pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Maximum output frequency >3GHz • Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLK input • Additive phase jitter, RMS <0.3ps typical • Output skew 23ps typical • Part-to-part skew 85ps typical • Propagation delay 705ps typical • LVPECL mode operating voltage supply range: V = 2.375V to 5.25V, V = 0V • ECL mode operating voltage supply range VCC = 0V, VEE = -5.25V to -2.375V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages BLOCK DIAGRAM PCLK0 nPCLK0 Q0 nQ0 PCLK1 nPCLK1 Q2 nQ2 CLK_SEL Q5 nQ5 Q6 nQ6 Q7 nQ7 Q8 nQ8 Q9 nQ9 PIN ASSIGNMENT VCCO nQ2 Q2 nQ1 TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 853111AY ICS853111AY 32 Lead LQFP tray -40°C to 85°C 853111AYT ICS853111AY 32 Lead LQFP 1000 tape & reel -40°C to 85°C 853111AYLF ICS853111AYL 32 Lead "Lead-Free" LQFP tray -40°C to 85°C 853111AYFT ICS853111AYL 32 Lead ""Lead-Free"" LQFP 1000 tape & reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER ICS853111A LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-LVPECL/ECL FANOUT BUFFER Description of Change 11 Corrected Figure 5C. 13 & 14 Power Considerations - corrected Power outputs MAX from 30.2mW to 30.94mW, 10/31/03 equations. T4A T4D T5 B 1 Features section - increased voltage range to 5.25V. Power Supply table - increased maximum VCC to 5.25V. Added 5V LVPECL DC Characteristics table. AC Characteristics table - increased V range to -5.25V to 2.375V, and V to 2.375V to 5.25V. Corrected Output Load AC Test Circuit Diagram, VEE range from" -1.8V to - 0.375V" to "-3.25V to -0.375V". 4/28/04 11 LVPECL clock Input Interface - added another CML driver diagram. 13 & 14 Power Considerations - changed Power core max from 3.8V to 5.25V and recalculated equations. 17 Ordering Information Table - added lead-free marking to part number. Updated datasheets. 7/6/07 T4C, T4D C LVPECL 3.3V DC Characteristics Table - corrected IIH max. from 150µA to 200µA and IIL min. from -150µA to -200µA. LVPECL DC Characteristics Tables - corrected IIH max. from 150µA to 200µA; and I min. from -150µA to -200µA. 10/25/07 ECL DC Characteristics Table - corrected IIH max. from 150µA to 200µA and IIL min. from -150µA to -200µA. 12 Added Termination for 5V LVPECL Output section. IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER ICS853111A LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-LVPECL/ECL FANOUT BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851 2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo, ICS and HiPerClocks are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOW SKEW, 1-TO-10, DIFFERENTIAL-TOLVPECL/ECL FANOUT BUFFER

ICS853111A

The ICS853111A is a low skew, high perfor-
mance 1-to-10 Differential-to-2.5V/3.3V LVPECL/

HiPerClockS E C L Fa n o u t B u f e r a n d a m e m b e r o f t h e

HiPerClockS family of High Performance

Clock Solutions from I DT. The ICS853111A
is characterized to operate from either a 2.5V, 3.3V or a
5V power supply. Guaranteed output and par t-to-par t skew
characteristics make the ICS853111A ideal for those clock
distribution applications demanding well defined perfor-
mance and repeatability.
• Ten differential LVPECL outputs
• Two selectable differential LVPECL PCLK/nPCLK clock inputs
• PCLK, nPCLK pairs can accept the following differential input levels LVPECL, LVDS, CML, SSTL
• Maximum output frequency >3GHz
• Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLK input
• Additive phase jitter, RMS <0.3ps typical
• Output skew 23ps typical
• Part-to-part skew 85ps typical
• Propagation delay 705ps typical
• LVPECL mode operating voltage supply range:

V = 2.375V to 5.25V, V = 0V
• ECL mode operating voltage supply range VCC = 0V, VEE = -5.25V to -2.375V
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6 packages

BLOCK DIAGRAM

PCLK0 nPCLK0

Q0 nQ0

PCLK1
nPCLK1

Q2 nQ2

CLK_SEL

Q5 nQ5

Q6 nQ6

Q7 nQ7

Q8 nQ8

Q9 nQ9

PIN ASSIGNMENT

VCCO nQ2

Q2 nQ1
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature
853111AY

ICS853111AY
32 Lead LQFP
tray
-40°C to 85°C
853111AYT

ICS853111AY
32 Lead LQFP
1000 tape & reel -40°C to 85°C
853111AYLF

ICS853111AYL
32 Lead "Lead-Free" LQFP
tray
-40°C to 85°C
853111AYFT

ICS853111AYL
32 Lead ""Lead-Free"" LQFP 1000 tape & reel -40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER

ICS853111A LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-LVPECL/ECL FANOUT BUFFER

Description of Change
11 Corrected Figure 5C.
13 & 14 Power Considerations - corrected Power outputs MAX from 30.2mW to 30.94mW, 10/31/03
equations.

T4A T4D T5 B
1 Features section - increased voltage range to 5.25V.

Power Supply table - increased maximum VCC to 5.25V.

Added 5V LVPECL DC Characteristics table.

AC Characteristics table - increased V range to -5.25V to 2.375V, and V
to 2.375V to 5.25V.

Corrected Output Load AC Test Circuit Diagram, VEE range from" -1.8V to -
0.375V" to "-3.25V to -0.375V".
4/28/04
11 LVPECL clock Input Interface - added another CML driver diagram.
13 & 14 Power Considerations - changed Power core max from 3.8V to 5.25V and recalculated equations.
17 Ordering Information Table - added lead-free marking to part number. Updated datasheets.
7/6/07

T4C, T4D C

LVPECL 3.3V DC Characteristics Table - corrected IIH max. from 150µA to
200µA and IIL min. from -150µA to -200µA.

LVPECL DC Characteristics Tables - corrected IIH max. from 150µA to 200µA;
and I min. from -150µA to -200µA.
10/25/07

ECL DC Characteristics Table - corrected IIH max. from 150µA to 200µA and IIL
min. from -150µA to -200µA.
12 Added Termination for 5V LVPECL Output section.

IDT / ICS 1-TO-10, LVPECL/ECL FANOUT BUFFER

ICS853111A LOW SKEW, 1-TO-10, DIFFERENTIAL-TO-LVPECL/ECL FANOUT BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited 321 Kingston Road Leatherhead, Surrey KT22 7TU England +44 0 1372 363 339 Fax +44 0 1372 378851
2007 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo, ICS and HiPerClocks are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853111AYLF Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS853111AYLF 637161