ICS853011CMLF
ICS853011CMLF Datasheet
The ICS853011C is a low skew, high performance
| Part | Datasheet |
|---|---|
ICS853011CMLF |
ICS853011CMLF (pdf) |
| Related Parts | Information |
|---|---|
|
ICS853011CMLFT |
ICS853011CMLFT |
|
ICS853011CGLF |
ICS853011CGLF |
|
ICS853011CGLFT |
ICS853011CGLFT |
| PDF Datasheet Preview |
|---|
| LOW SKEW, 1-TO-2, DIFFERENTIAL-TO2.5V, 3.3V LVPECL/ECL FANOUT BUFFER The ICS853011C is a low skew, high performance 1-to-2 Differential-to-2.5V, 3.3V LVPECL/ECL HiPerClockS Fanout Buffer and a member of the HiPerClockS family of High Performance Clock Solutions from IDT. The ICS853011C is characterized to operate from either a 2.5V or a 3.3V power supply. Guaranteed output and part-to-part skew characteristics make the ICS853011C ideal for those clock distribution applications demanding well defined performance and repeatability. ICS853011C • Two differential 2.5V or 3.3V LVPECL/ECL outputs • One differential PCLK, nPCLK input pair • PCLK, nPCLK pair can accept the following differential input levels LVPECL, LVDS, CML, SSTL • Output frequency >2.5GHz • Translates any single ended input signal to 3.3V LVPECL levels with resistor bias on nPCLK input • Additive phase jitter, RMS 0.16ps typical • Output skew 15ps maximum • Part-to-part skew 130ps maximum • Propagation delay 330ps maximum • LVPECL mode operating voltage supply range: VCC = 2.375V to 3.8V, VEE = 0V • ECL mode operating voltage supply range: VCC = 0V, VEE = -3.8V to -2.375V • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages Block Diagram PCLK Pulldown nPCLK Pullup/Pulldown Q0 nQ0 Q1 nQ1 Pin Assignment Q0 1 nQ0 2 Q1 3 nQ1 4 8 VCC 7 PCLK 6 nPCLK 5 VEE ICS853011C 8 Lead SOIC, 150MIL 3.90mm x 4.90mm x 1.37mm package body M Package Top View ICS853011C 8 Lead TSSOP, 118mil 3.0mm x 3.0mm x package body G Package Top View IDT / ICS 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853011C LOW SKEW, 1-TO-2, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL FANOUT BUFFER Table Pin Descriptions Number Name Type Q0, nQ0 Output Differential output pair. LVPECL/ECL interface levels. Ordering Information Table Ordering Information Part/Order Number ICS853011CM ICS853011CMT ICS853011CMLF ICS853011CMLFT ICS853011CG ICS853011CGT ICS853011CGLF ICS853011CGLFT Marking 853011C 3011CLF 011C 11CL Package 8 Lead SOIC 8 Lead SOIC “Lead-Free” 8 Lead SOIC “Lead-Free” 8 Lead SOIC 8 Lead TSSOP 8 Lead TSSOP “Lead-Free” 8 Lead TSSOP “Lead-Free” 8 Lead TSSOP Shipping Packaging Tube 2500 Tape & Reel Tube 2500 Tape & Reel Tube 2500 Tape & Reel Tube 2500 Tape & Reel Temperature -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853011C LOW SKEW, 1-TO-2, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL FANOUT BUFFER Table Page Description of Change 16 Ordering Information table - added lead-free marking for TSSOP package. 15 Corrected Package Dimensions Table for 8 Lead SOIC. Date 6/12/07 7/28/08 IDT / ICS 2.5V, 3.3V LVPECL/ECL FANOUT BUFFER ICS853011C LOW SKEW, 1-TO-2, DIFFERENTIAL-TO-2.5V, 3.3V LVPECL FANOUT BUFFER Contact Information: Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Technical Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA |
| More datasheets: 90719-122HLF | 90547-403HLF | 92418-406HLF | 90547-123HLF | 90719-118HLF | 90547-122HLF | DCMY-37P | DBMY25SE | DCMME37PK87 | ICS853011CMLFT |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS853011CMLF Datasheet file may be downloaded here without warranties.