8512061AGILFT
8512061AGILFT Datasheet
The ICS8512061I is a transceiver which can
| Part | Datasheet |
|---|---|
8512061AGILFT |
8512061AGILFT (pdf) |
| Related Parts | Information |
|---|---|
|
8512061AGILF |
8512061AGILF |
| PDF Datasheet Preview |
|---|
| SINGLE CHANNEL 0.7V DIFFERENTIALTO-LVTTL TRANSCEIVER The ICS8512061I is a transceiver which can interchange data across multipoint data bus HiPerClockS structures. The device has an LVTTL driver and one HCSL receiver driver. It translates between LVTTL signals and HCSL signals. Backplane Transmission Telecommunication System Data Communications ATCA Clock Distribution ICS8512061I • One HCSL output pair and one LVCMOS/LVTTL output • One single-ended LVCMOS/LVTTL signal input • LVTTL I/O signal up to 250MHz • HCSL interface pins in high impedance state when the device is powered down • Power-up and power-down glitch-free • Additive Phase Jitter, RMS 0.23ps typical • Full 3.3V operating supply • -40°C to 85°C ambient operating temperature • Available in lead-free RoHS 6 package Block Diagram QB IREF IN Pullup DIR_SEL Pulldown HCSL Interface Pin Assignment GND 1 QB 2 DIR_SEL 3 IN 4 8 QA 7 nQA 6 VDD 5 IREF ICS8512061I 8 Lead TSSOP 4.40mm x 3.0mm x 0.925mm package body G Package Top View IDT / ICS TRANSCEIVER ICS8512061I SINGLE CHANNEL 0.7V DIFFERENTIAL-TO-LVTTL TRANSCEIVER Table Pin Descriptions Number 1 2 4 5 6 7, 8 Name GND QB DIR_SEL IN IREF VDD nQA, QA Type Power Output Input Pulldown Input Power Output Pullup Description Power supply ground. Single-ended output. LVCMOS/LVTTL interface levels. HCSL receiver and driver direction select pin. When HIGH, selects the IN-to-QA/nQA path. When LOW, selects the QA/nQA-to-QB path. LVCMOS/LVTTL interface levels. Single-ended signal input. LVCMOS/LVTTL interface levels. An external fixed precision resistor from this pin to ground provides a reference current used for differential current-mode QA/nQA outputs. Power supply pin. Differential transceiver pair. HCSL interface levels. NOTE Pullup and Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values. Table Pin Characteristics Parameter Input Capacitance Power Dissipation Ordering Information Table Ordering Information Part/Order Number 8512061AGILF 8512061AGILFT Marking 61AIL Package “Lead-Free” 8 Lead TSSOP “Lead-Free” 8 Lead TSSOP Shipping Packaging Tube 2500 Tape & Reel Temperature -40°C to 85°C -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications, such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS TRANSCEIVER ICS8512061I SINGLE CHANNEL 0.7V DIFFERENTIAL-TO-LVTTL TRANSCEIVER Description of Change Added Differential DC Characteristics Table. Date 11/19/08 IDT / ICS TRANSCEIVER ICS8512061I SINGLE CHANNEL 0.7V DIFFERENTIAL-TO-LVTTL TRANSCEIVER Contact Information: Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Technical Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA |
| More datasheets: 0472002.MXL | 0472.500MXL | 047202.5MXL | 62435-107 | 62435-101 | 62435-101LF | 62435-102 | 62435-104 | 62435-105 | RUSB250 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8512061AGILFT Datasheet file may be downloaded here without warranties.