8501BYLF

8501BYLF Datasheet


ICS8501

Part Datasheet
8501BYLF 8501BYLF 8501BYLF (pdf)
Related Parts Information
8501BYLFT 8501BYLFT 8501BYLFT
PDF Datasheet Preview
Integrated Circuit Systems, Inc.

ICS8501

LOW SKEW, 1-TO-16 DIFFERENTIAL CURRENT MODE FANOUT BUFFER

The ICS8501 is a low skew, 1-to-16 Differential

Current Mode Fanout Buffer and a member of

HiPerClockS the HiPerClockS family of High Performance

Clock Solutions from ICS. The ICS8501 is de-
signed to translate any differential signal levels
to small swing differential current mode DCM output levels.

An external reference resistor is used to set the value of the
current supplied to an external load/termination resistor.

The load resistor value is chosen to equal the value of the
characteristic line impedance of The ICS8501 is char-
acterized at an operating supply voltage of 3.3V.

The small swing outputs, accurate crossover voltage and duty cycle makes the ICS8501 ideal for interfacing to today’s most advanced microprocessors.
• 16 small swing DCM outputs
• Translates any differential input signal LVPECL, LVHSTL, LVDS, DCM to DCM levels without external bias networks
• Translates single ended input levels to DCM levels with a resistor bias network on the nCLK input
• Translates single ended input levels to inverted DCM levels with a resistor bias network on the CLK input
• Maximum output frequency 500MHz
• Output skew 100ps maximum
• Part-to-part skew 650ps maximum
• VOH 850mV maximum
• 3.3V operating supply
• 0°C to 70°C ambient operating temperature

BLOCK DIAGRAM

CLK nCLK

Q0 nQ0

Q1 nQ1

Q2 nQ2

Q3 nQ3

Q4 nQ4

Q5 nQ5

Q6 nQ6

Q7 nQ7
8501BY

PIN ASSIGNMENT
nCLK VDD Q15
nQ15 Q14
nQ14 GND Q13 nQ13 Q12 nQ12

Q15 nQ15

Q14 nQ14

Q13 nQ13

Q12 nQ12
TABLE ORDERING INFORMATION

Part/Order Number ICS8501BY ICS8501BYT

Marking ICS8501BY

ICS8501

LOW SKEW, 1-TO-16 DIFFERENTIAL CURRENT MODE FANOUT BUFFER

Package 48 Lead LQFP 48 Lead LQFP on Tape and Reel

Count 250 per tray
1000

Temperature 0°C to 70°C 0°C to 70°C

While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated ICS assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments.
8501BY

Integrated Circuit Systems, Inc.

ICS8501

LOW SKEW, 1-TO-16 DIFFERENTIAL CURRENT MODE FANOUT BUFFER

Page 2 3
converted min. from 0.6V to 600mV and typical from 0.71V to 710mV. Changed units of VOX from V to % and added note Added Applications Section. Updated format throughout data sheet.

Date 10/3/03
8501BY
More datasheets: SK14E3/TR13 | SK13E3/TR13 | SK110E3/TR13 | SPU0410HR5H-PB | YE24007 | 45-1431-1 | 45-1431-3 | 45-1431-2 | 1731070057 | 8501BYLFT


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8501BYLF Datasheet file may be downloaded here without warranties.

Datasheet ID: 8501BYLF 637140