ICS84329BM-01LFT

ICS84329BM-01LFT Datasheet

The ICS84329B-01 is a general purpose, single

Part	Datasheet
ICS84329BM-01LFT	ICS84329BM-01LFT (pdf)

Related Parts	Information
ICS84329BV-01LF	ICS84329BV-01LF
ICS84329BV-01LFT	ICS84329BV-01LFT
ICS84329BM-01LF	ICS84329BM-01LF

PDF Datasheet Preview
700MHZ, LOW JITTER, CRYSTAL-TO3.3V LVPECL FREQUENCY SYNTHESIZER The ICS84329B-01 is a general purpose, single output high frequency synthesizer and a member of HiPerClockS the HiPerClockS family of High Performance Clock Solutions from IDT. The VCO operates at a frequency range of 250MHz to 700MHz. The VCO frequency is programmed in steps equal to the value of the crystal frequency divided by The VCO and output frequency can be programmed using the serial or parallel interfaces to the configuration logic. The output can be configured to divide the VCO frequency by 1, 2, 4, and Output frequency steps as small as 125kHz to 1MHz can be achieved using a 16MHz crystal depending on the output dividers. Pin Assignments M0 1 M1 2 M2 3 M3 4 M4 5 M5 6 M6 7 M7 8 M8 9 N0 10 N1 11 VEE 12 TEST 13 VCC 14 28 nP_LOAD 27 VCC 26 XTAL_OUT 25 XTAL_IN 24 nc 23 nc 22 VCCA 21 S_LOAD 20 S_DATA 19 S_CLOCK 18 VCC 17 FOUT 16 nFOUT 15 VEE ICS84329B-01 28 Lead SOIC 7.5mm x 18.05mm x 2.25mm package body M Package Top View ICS84329B-01 • Fully integrated PLL, no external loop filter requirements • One differential 3.3V LVPECL output pair • Crystal oscillator interface • Output frequency range 31.25MHz 700MHz • VCO range 250MHz 700MHz • Parallel interface for programming counter and output dividers during power-up • Serial 3 wire interface • RMS period jitter 5.5ps maximum • Cycle-to-cycle jitter 35ps maximum • 3.3V supply voltage • 0°C to 70°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS 6 packages Block Diagram VEE TEST VCC VEE nFOUT FOUT VCC 25 24 23 22 21 20 19 S_CLOCK 26 18 N1 S_DATA 27 17 N0 S_LOAD 28 16 M8 VCCA 1 nc 2 15 M7 14 M6 13 M5 XTAL_IN 4 12 M4 Ordering Information Table Ordering Information Part/Order Number 84329BV-01 84329BV-01T 84329BM-01 84329BM-01T 84329BM-01LF 84329BM-01LFT Marking ICS84329BV-01 ICS84329BV-01 ICS84329BM-01 ICS84329BM-01 ICS84329BM-01LF ICS84329BM-01LF Package 28 Lead PLCC 28 Lead PLCC 28 Lead SOIC 28 Lead SOIC “Lead-Free” 28 Lead SOIC “Lead-Free” 28 Lead SOIC Shipping Packaging Tube 500 Tape & Reel Tube 1000 Tape & Reel Tube 1000 Tape & Reel Temperature 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LVPECL FREQUENCY SYNTHESIZER ICS84329B-01 700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER T3A A T5 T11 A B Page 2 18 1 2 4 Description of Change Paragraph 2 changed series resonant crystal to parallel resonant crystal. Ordering Information Table - added ""ICS"" to the marking. Features Section - added Lead-Free bullet. Updated Parallel & Serial Load Operations diagram. Parallel & Serial Mode Function Table - corrected S_LOAD column 3rd row, from X to L. Crystal Table - added Drive Level. Ordering Information Table - added Lead-Free part numbers and note. Features Section - corrected Output frequency range from 25MHz to 31.25MHz. PLCC Pin Assignment, corrected pin 5 typo from XTAL2_OUT to XTAL_OUT. Converted datasheet format. Date 11/1/04 5/23/05 6/10/05 3/26/09 IDT / ICS LVPECL FREQUENCY SYNTHESIZER ICS84329B-01 700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER Contact Information: Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 Technical Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2009 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

700MHZ, LOW JITTER, CRYSTAL-TO3.3V LVPECL FREQUENCY SYNTHESIZER

The ICS84329B-01 is a general purpose, single
output high frequency synthesizer and a member of

HiPerClockS the HiPerClockS family of High Performance

Clock Solutions from IDT. The VCO operates at a
frequency range of 250MHz to 700MHz. The VCO
frequency is programmed in steps equal to the value of the crystal
frequency divided by The VCO and output frequency can be
programmed using the serial or parallel interfaces to the
configuration logic. The output can be configured to divide the

VCO frequency by 1, 2, 4, and Output frequency steps as small
as 125kHz to 1MHz can be achieved using a 16MHz crystal
depending on the output dividers.

Pin Assignments

M0 1 M1 2 M2 3 M3 4 M4 5 M5 6 M6 7 M7 8 M8 9 N0 10 N1 11 VEE 12 TEST 13 VCC 14
28 nP_LOAD 27 VCC 26 XTAL_OUT 25 XTAL_IN 24 nc 23 nc 22 VCCA 21 S_LOAD 20 S_DATA 19 S_CLOCK 18 VCC 17 FOUT 16 nFOUT 15 VEE

ICS84329B-01
28 Lead SOIC 7.5mm x 18.05mm x 2.25mm
package body

M Package

Top View

ICS84329B-01
• Fully integrated PLL, no external loop filter requirements
• One differential 3.3V LVPECL output pair
• Crystal oscillator interface
• Output frequency range 31.25MHz 700MHz
• VCO range 250MHz 700MHz
• Parallel interface for programming counter and output dividers
during power-up
• Serial 3 wire interface
• RMS period jitter 5.5ps maximum
• Cycle-to-cycle jitter 35ps maximum
• 3.3V supply voltage
• 0°C to 70°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS 6
packages

Block Diagram

VEE TEST

VCC VEE nFOUT FOUT VCC
25 24 23 22 21 20 19

S_CLOCK 26
18 N1

S_DATA 27
17 N0

S_LOAD 28
16 M8

VCCA 1 nc 2
15 M7 14 M6
13 M5

XTAL_IN 4
12 M4
Ordering Information
Table Ordering Information

Part/Order Number 84329BV-01 84329BV-01T 84329BM-01 84329BM-01T 84329BM-01LF 84329BM-01LFT

Marking ICS84329BV-01 ICS84329BV-01 ICS84329BM-01 ICS84329BM-01 ICS84329BM-01LF ICS84329BM-01LF

Package 28 Lead PLCC 28 Lead PLCC 28 Lead SOIC 28 Lead SOIC “Lead-Free” 28 Lead SOIC “Lead-Free” 28 Lead SOIC

Shipping Packaging Tube
500 Tape & Reel Tube
1000 Tape & Reel Tube
1000 Tape & Reel

Temperature 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as those requiring extended temperature ranges, high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LVPECL FREQUENCY SYNTHESIZER

ICS84329B-01 700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER

T3A A

T5 T11 A B

Page 2 18 1 2 4

Description of Change
Paragraph 2 changed series resonant crystal to parallel resonant crystal. Ordering Information Table - added ""ICS"" to the marking.
Features Section - added Lead-Free bullet. Updated Parallel & Serial Load Operations diagram. Parallel & Serial Mode Function Table - corrected S_LOAD column 3rd row, from X to L. Crystal Table - added Drive Level. Ordering Information Table - added Lead-Free part numbers and note.

Features Section - corrected Output frequency range from 25MHz to 31.25MHz.

PLCC Pin Assignment, corrected pin 5 typo from XTAL2_OUT to XTAL_OUT. Converted datasheet format.

Date 11/1/04
5/23/05
6/10/05 3/26/09

IDT / ICS LVPECL FREQUENCY SYNTHESIZER

ICS84329B-01 700MHZ, LOW JITTER, CRYSTAL-TO-3.3V LVPECL FREQUENCY SYNTHESIZER

Contact Information:

Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

Technical Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2009 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS84329BM-01LFT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS84329BM-01LFT 637117