84314AYLF

84314AYLF Datasheet

The ICS84314 is a general purpose quad output frequency synthesizer and a member of the

Part	Datasheet
84314AYLF	84314AYLF (pdf)

Related Parts	Information
84314AYLFT	84314AYLFT

PDF Datasheet Preview
DATA SHEET The ICS84314 is a general purpose quad output frequency synthesizer and a member of the HiPerClockS family of High Performance Clock Solutions from ICS. When the device uses par- allel loading, the M bits are programmable and the output divider is hard-wired for divide by 2 thus providing a frequency range of 125MHz to 350MHz. In serial program- ming mode, the M bits are programmable and the output di- vider can be set for either divide by 2 or divide by 4, providing a frequency range of 62.5MHz to 350MHz. The low cycle- cycle jitter and broad frequency range of the ICS84314 make it an ideal clock generator for a variety of demanding applica- tions which require high performance. • Fully integrated PLL • 4 differential 3.3V or 2.5V LVPECL outputs • Selectable crystal oscillator interface or LVCMOS TEST_CLK input • Output frequency range 62.5MHz to 350MHz • VCO range 250MHz to 700MHz • Parallel interface for programming counter and output dividers during power-up • Serial 3 wire interface • Cycle-to-cycle jitter 23ps typical • Output skew 16ps typical • Output duty cycle 49% < odc < 51%, fout 125MHz • Full 3.3V or mixed 3.3V core, 2.5V operating supply • 0°C to 85°C ambient operating temperature • Lead-Free package available BLOCK DIAGRAM PIN ASSIGNMENT XTAL1 XTAL2 nP_LOAD VCO_SEL VCO_SEL XTAL_SEL TEST_CLK XTAL1 XTAL2 ÷ 16 S_LOAD S_DATA S_CLOCK nP_LOAD M0:M8 PLL PHASE DETECTOR ÷4 1 CONFIGURATION INTERFACE LOGIC 32 31 30 29 28 27 26 25 24 TEST_CLK 23 XTAL_SEL 2 VCCA M7 4 M8 5 ICS84314 21 S_LOAD 20 S_DATA VEE 6 19 S_CLOCK VCC 7 18 MR TABLE ORDERING INFORMATION Part/Order Number ICS84314AY ICS84314AYT ICS84314AYLF Marking ICS84314AY ICS84314AYLF ICS84314AYLFT ICS84314AYLF Package 32 Lead LQFP 32 Lead LQFP on Tape and Reel 32 Lead "Lead-Free" LQFP 32 Lead "Lead-Free" LQFP on Tape and Reel Count 250 per tray 1000 250 per tray 1000 Temperature 0°C to 85°C 0°C to 85°C 0°C to 85°C 0°C to 85°C The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated ICS assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments. 84314AY 17 IDT / ICS 350MHZ, CRYSTAL-TO-3.3V/2.5V LVPECL FREQUENCY SYNTHESIZER W/FANOUT BUFFER ICS84314 ICS84314 Integrated Circuit 350MH , C - -3.3V/2.5V LVPECL 350MHZ, CRYSTASLy-TsOte-m3.3sV, I/2n.c5.V LVPECL FREQUENCY SYNTHESIZER ZW/FANROYUSTTABLUFTFOER F S /F B REQUENCY YNTHESIZER W ANOUT UFFER Page 6 13 - 14 1 Description of Change LVPECL table - changed VOH max. from VCC - 1.0V to VCC - 0.9V. Changed equations in Power Considerations to correlate with Table 5C. LVCMOS/LVTTL TEST_CLK changed to LVCMOS TEST_CLK. Added Lead-Free bullet Pin Descriptions Table - Pin 24, TEST_CLK, description changed from LVCMOS/LVTTL interface levels to LVCMOS interface levels. LVCMOS DC Characteristics - TEST_CLK VIH min. changed from 2V to 2.35V VIL max. changed from 1.3V to 0.95V. Added Lead-Free part number to Ordering Information Table. LVCMOS DC Characteristics Table - added V /V NOTE IH IL Date 2/4/04 11/5/04 1/27/05 84314AY 18 IDT / ICS 350MHZ, CRYSTAL-TO-3.3V/2.5V LVPECL FREQUENCY SYNTHESIZER W/FANOUT BUFFER ICS84314 IICCSS268554203-1440A BUFFER TTSSDD Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support 408-284-8200 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

DATA SHEET

The ICS84314 is a general purpose quad output frequency synthesizer and a member of the

HiPerClockS family of High Performance Clock

Solutions from ICS. When the device uses par-
allel loading, the M bits are programmable and
the output divider is hard-wired for divide by 2 thus providing
a frequency range of 125MHz to 350MHz. In serial program-
ming mode, the M bits are programmable and the output di-
vider can be set for either divide by 2 or divide by 4, providing
a frequency range of 62.5MHz to 350MHz. The low cycle-
cycle jitter and broad frequency range of the ICS84314 make
it an ideal clock generator for a variety of demanding applica-
tions which require high performance.
• Fully integrated PLL
• 4 differential 3.3V or 2.5V LVPECL outputs
• Selectable crystal oscillator interface
or LVCMOS TEST_CLK input
• Output frequency range 62.5MHz to 350MHz
• VCO range 250MHz to 700MHz
• Parallel interface for programming counter
and output dividers during power-up
• Serial 3 wire interface
• Cycle-to-cycle jitter 23ps typical
• Output skew 16ps typical
• Output duty cycle 49% < odc < 51%, fout 125MHz
• Full 3.3V or mixed 3.3V core, 2.5V operating supply
• 0°C to 85°C ambient operating temperature
• Lead-Free package available

BLOCK DIAGRAM

PIN ASSIGNMENT

XTAL1

XTAL2
nP_LOAD

VCO_SEL

VCO_SEL XTAL_SEL TEST_CLK

XTAL1 XTAL2
÷ 16

S_LOAD S_DATA S_CLOCK nP_LOAD

M0:M8

PLL PHASE DETECTOR
÷4 1

CONFIGURATION INTERFACE LOGIC
32 31 30 29 28 27 26 25
24 TEST_CLK
23 XTAL_SEL
2 VCCA

M7 4 M8 5

ICS84314
21 S_LOAD 20 S_DATA

VEE 6
19 S_CLOCK

VCC 7
18 MR
TABLE ORDERING INFORMATION

Part/Order Number ICS84314AY ICS84314AYT

ICS84314AYLF

Marking ICS84314AY ICS84314AYLF

ICS84314AYLFT

ICS84314AYLF

Package 32 Lead LQFP 32 Lead LQFP on Tape and Reel 32 Lead "Lead-Free" LQFP 32 Lead "Lead-Free" LQFP on Tape and Reel

Count 250 per tray
1000 250 per tray
1000

Temperature 0°C to 85°C 0°C to 85°C 0°C to 85°C
0°C to 85°C

The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries. While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated ICS assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or critical medical instruments.
84314AY
17 IDT / ICS 350MHZ, CRYSTAL-TO-3.3V/2.5V LVPECL FREQUENCY SYNTHESIZER W/FANOUT BUFFER

ICS84314

ICS84314

Integrated Circuit
350MH , C - -3.3V/2.5V LVPECL 350MHZ, CRYSTASLy-TsOte-m3.3sV, I/2n.c5.V LVPECL

FREQUENCY SYNTHESIZER ZW/FANROYUSTTABLUFTFOER

F S /F B REQUENCY YNTHESIZER W

ANOUT

UFFER

Page 6
13 - 14 1

Description of Change

LVPECL table - changed VOH max. from VCC - 1.0V to VCC - 0.9V. Changed equations in Power Considerations to correlate with Table 5C. LVCMOS/LVTTL TEST_CLK changed to LVCMOS TEST_CLK. Added Lead-Free bullet

Pin Descriptions Table - Pin 24, TEST_CLK, description changed from LVCMOS/LVTTL interface levels to LVCMOS interface levels.
LVCMOS DC Characteristics - TEST_CLK VIH min. changed from 2V to 2.35V VIL max. changed from 1.3V to 0.95V. Added Lead-Free part number to Ordering Information Table.

LVCMOS DC Characteristics Table - added V /V NOTE IH IL

Date 2/4/04
11/5/04
1/27/05
84314AY
18 IDT / ICS 350MHZ, CRYSTAL-TO-3.3V/2.5V LVPECL FREQUENCY SYNTHESIZER W/FANOUT BUFFER

ICS84314

IICCSS268554203-1440A BUFFER

TTSSDD

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
408-284-8200

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 84314AYLF Datasheet file may be downloaded here without warranties.

Datasheet ID: 84314AYLF 637108