8402010AKIT

8402010AKIT Datasheet

ICS8402010I is a low phase noise Clock Generator

Part	Datasheet
8402010AKIT	8402010AKIT (pdf)

Related Parts	Information
8402010AKILFT	8402010AKILFT
8402010AKILF	8402010AKILF
8402010AKI	8402010AKI

PDF Datasheet Preview
FEMTOCLOCK CRYSTAL-TOLVDS/LVCMOS CLOCK GENERATOR ICS8402010I is a low phase noise Clock Generator and is a member of the HiperClockS family of high HiPerClockS performance clock solutions from IDT. The device provides three banks of outputs and a reference clock. Each bank can be independently enabled by using output enable pins. A 25MHz, 18pF parallel resonant crystal is used to generate the 16.66MHz, 62.5MHz and 25MHz frequencies. The typical RMS phase jitter for this device is less than 1ps. ICS8402010I • Three banks of outputs Bank A/B three single-ended LVCMOS outputs at 16.66MHz Bank C three differential LVDS outputs at 62.5MHz One single-ended reference clock output at 25MHz • Crystal input frequency 25MHz • Maximum output frequency 62.5MHz • RMS phase jitter 62.5MHz, using a 25MHz crystal, Integration Range 1.875MHz - 20MHz 0.375ps typical • Full 3.3V operating supply • -40°C to 85°C ambient operating temperature • Available in both standard RoHS 5 and lead-free RoHS6 packages BLOCK DIAGRAM OE[2:0] Pullup GND XTAL_OUT XTAL_IN OE2 OE1 OE0 VDDA GND PIN ASSIGNMENT XTAL_IN XTAL_OUT VDDO_REF REF_OUT GND QA0 QA1 QA2 VDDO_A 32 31 30 29 28 27 26 25 3 ICS8402010I 22 4 32-Lead VFQFN 21 5 5mm x 5mm x 0.925mm 20 package body K Package Top View VDDO_C nQC2 QC2 nQC1 QC1 nQC0 QC0 VDDO_C 9 10 11 12 13 14 15 16 25MHz Phase Detector VCO 500MHz ÷20 ÷30 ÷30 ÷8 LVCMOS - 16.66MHz QA0 LVCMOS - 16.66MHz QB0 QB2 LVDS 62.5MHz QC0 nQC0 QC1 nQC1 QC2 nQC2 LVCMOS - 25MHz REF_OUT TABLE ORDERING INFORMATION Part/Order Number Marking Package Shipping Packaging Temperature 8402010AKI ICS402010AI 32 Lead VFQFN Tray -40°C to 85°C 8402010AKIT ICS402010AI 32 Lead VFQFN 1000 Tape & Reel -40°C to 85°C 8402010AKILF ICS02010AIL 32 Lead "Lead-Free" VFQFN Tray -40°C to 85°C 8402010AKILFT ICS02010AIL 32 Lead "Lead-Free" VFQFN 1000 Tape & Reel -40°C to 85°C NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LVDS/LVCMOS CLOCK GENERATOR ICS8402010I FEMTOCLOCK CRYSTAL-TO-LVDS/LVCMOS CLOCK GENERATOR Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775 For Tech Support +480-763-2056 Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA 2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

FEMTOCLOCK CRYSTAL-TOLVDS/LVCMOS CLOCK GENERATOR

ICS8402010I is a low phase noise Clock Generator
and is a member of the HiperClockS family of high

HiPerClockS performance clock solutions from IDT. The device
provides three banks of outputs and a reference
clock. Each bank can be independently enabled by
using output enable pins. A 25MHz, 18pF parallel resonant
crystal is used to generate the 16.66MHz, 62.5MHz and 25MHz
frequencies. The typical RMS phase jitter for this device is less
than 1ps.

ICS8402010I
• Three banks of outputs Bank A/B three single-ended LVCMOS outputs at 16.66MHz Bank C three differential LVDS outputs at 62.5MHz One single-ended reference clock output at 25MHz
• Crystal input frequency 25MHz
• Maximum output frequency 62.5MHz
• RMS phase jitter 62.5MHz, using a 25MHz crystal,

Integration Range 1.875MHz - 20MHz 0.375ps typical
• Full 3.3V operating supply
• -40°C to 85°C ambient operating temperature
• Available in both standard RoHS 5 and lead-free RoHS6
packages

BLOCK DIAGRAM

OE[2:0] Pullup

GND XTAL_OUT XTAL_IN OE2 OE1 OE0 VDDA GND

PIN ASSIGNMENT

XTAL_IN XTAL_OUT

VDDO_REF REF_OUT

GND QA0 QA1 QA2 VDDO_A
32 31 30 29 28 27 26 25
3 ICS8402010I 22
4 32-Lead VFQFN 21
5 5mm x 5mm x 0.925mm 20
package body

K Package

Top View

VDDO_C nQC2 QC2 nQC1 QC1 nQC0 QC0 VDDO_C
9 10 11 12 13 14 15 16
25MHz

Phase Detector

VCO 500MHz
÷20
÷30 ÷30 ÷8

LVCMOS - 16.66MHz QA0

LVCMOS - 16.66MHz QB0

QB2 LVDS 62.5MHz

QC0 nQC0 QC1 nQC1 QC2 nQC2 LVCMOS - 25MHz REF_OUT
TABLE ORDERING INFORMATION

Part/Order Number

Marking

Package

Shipping Packaging Temperature
8402010AKI

ICS402010AI
32 Lead VFQFN

Tray
-40°C to 85°C
8402010AKIT

ICS402010AI
32 Lead VFQFN
1000 Tape & Reel
-40°C to 85°C
8402010AKILF

ICS02010AIL
32 Lead "Lead-Free" VFQFN

Tray
-40°C to 85°C
8402010AKILFT

ICS02010AIL
32 Lead "Lead-Free" VFQFN 1000 Tape & Reel
-40°C to 85°C

NOTE Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology, Incorporated IDT assumes no responsibility for either its use or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LVDS/LVCMOS CLOCK GENERATOR

ICS8402010I FEMTOCLOCK CRYSTAL-TO-LVDS/LVCMOS CLOCK GENERATOR

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 inside USA +408-284-8200 outside USA Fax 408-284-2775

For Tech Support
+480-763-2056

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800-345-7015 inside USA +408-284-8200 outside USA
2008 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT, the IDT logo, ICS and HiPerClockS are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 8402010AKIT Datasheet file may be downloaded here without warranties.

Datasheet ID: 8402010AKIT 637090