ICS7152AMI-11T

ICS7152AMI-11T Datasheet

ICS7152A

Part	Datasheet
ICS7152AMI-11T	ICS7152AMI-11T (pdf)

Related Parts	Information
ICS7152AM-02T	ICS7152AM-02T
ICS7152AM-11T	ICS7152AM-11T
ICS7152AM-11	ICS7152AM-11
ICS7152AMI-11	ICS7152AMI-11
ICS7152AM-02	ICS7152AM-02

PDF Datasheet Preview
SPREAD SPECTRUM CLOCK GENERATOR DATASHEET ICS7152A The ICS7152A-02 and -11 are clock generators for EMI Electromagnetic Interference reduction see below for frequency ranges and multiplier ratios . Spectral peaks are attenuated by modulating the system clock frequency. Down or center spread profiles are selectable. Down spread will not exceed the maximum frequency of an unspread clock, and center spread does not change the average operating frequency of the system IDT offers many other clocks for computers and computer peripherals. Consult IDT when you need to remove crystals and oscillators from your board. • Operating voltage of V • Packaged in 8-pin SOIC • Input frequency range of to MHz • Output frequency range of to MHz • Provides a spread spectrum clock output center spread down spread • Low cycle-to-cycle jitter - less than 100 ps • Advanced, low-power CMOS process • Industrial and commercial temperature ranges • Available in Pb lead free package • Pin compatible with Fujitsu MB88152-102 and -111 NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram SEL FREQ XENS XIN XOUT Clock Buffer/ Crystal Ocsillator External caps required with crystal for accurate tuning of the clock PLL Clock Synthesis and Spread Spectrum Circuitry CKOUT Product Lineup Product ICS7152AM-02, ICS7152AMI-02 ICS7152AM-11, ICS7152AMI-11 Input Frequency Range MHz to MHz to MHz Modulation Type Down spread Center spread Modulation Enable Pin Yes IDT / ICS SPREAD SPECTRUM CLOCK GENERATOR ICS7152A SPREAD SPECTRUM CLOCK GENERATOR SSCG Pin Assignment XIN XOUT GND 8 pin 150 mil SOIC XENS FREQ VDD CKOUT Spread Direction and Percentage Select Table SEL Pin 4 Spread Spread Direction Percentage % ICS7152AM-11 Down ICS7152AM-02 ICS7152AM-11 Down ICS7152AM-02 Modulation Enable Select Table Ordering Information Part / Order Number 7152AM-02* 7152AM-02T* 7152AM-02LF 7152AM-02LFT 7152AMI-02* 7152AMI-02T* 7152AMI-02LF 7152AMI-02LFT 7152AM-11* 7152AM-11T* 7152AM-11LF 7152AM-11LFT 7152AMI-11* 7152AMI-11T* 7152AMI-11LF 7152AMI-11LFT Marking 7152AM02 152AM02L 152AMI02 52AMI02L 7152AM11 7152A11L 7152AI11 152AI11L Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS SPREAD SPECTRUM CLOCK GENERATOR ICS7152A SPREAD SPECTRUM CLOCK GENERATOR Originator J. Sarma SSCG IDT / ICS SPREAD SPECTRUM CLOCK GENERATOR ICS7152A SPREAD SPECTRUM CLOCK GENERATOR SSCG Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

SPREAD SPECTRUM CLOCK GENERATOR

DATASHEET

ICS7152A

The ICS7152A-02 and -11 are clock generators for EMI Electromagnetic Interference reduction see below for frequency ranges and multiplier ratios . Spectral peaks are attenuated by modulating the system clock frequency. Down or center spread profiles are selectable. Down spread will not exceed the maximum frequency of an unspread clock, and center spread does not change the average operating frequency of the system

IDT offers many other clocks for computers and computer peripherals. Consult IDT when you need to remove crystals and oscillators from your board.
• Operating voltage of V
• Packaged in 8-pin SOIC
• Input frequency range of to MHz
• Output frequency range of to MHz
• Provides a spread spectrum clock output
center spread down spread
• Low cycle-to-cycle jitter - less than 100 ps
• Advanced, low-power CMOS process
• Industrial and commercial temperature ranges
• Available in Pb lead free package
• Pin compatible with Fujitsu MB88152-102 and -111

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

SEL FREQ XENS

XIN XOUT

Clock Buffer/ Crystal

Ocsillator

External caps required with crystal for accurate tuning of the clock

PLL Clock Synthesis and Spread Spectrum Circuitry

CKOUT

Product Lineup

Product ICS7152AM-02, ICS7152AMI-02 ICS7152AM-11, ICS7152AMI-11

Input Frequency Range MHz to MHz to MHz

Modulation Type Down spread Center spread

Modulation Enable Pin Yes

IDT / ICS SPREAD SPECTRUM CLOCK GENERATOR

ICS7152A SPREAD SPECTRUM CLOCK GENERATOR

SSCG

Pin Assignment

XIN XOUT GND
8 pin 150 mil SOIC

XENS FREQ VDD CKOUT

Spread Direction and Percentage Select Table

SEL Pin 4

Spread

Spread

Direction Percentage %

ICS7152AM-11

Down

ICS7152AM-02

ICS7152AM-11

Down

ICS7152AM-02

Modulation Enable Select Table
Ordering Information

Part / Order Number
7152AM-02* 7152AM-02T* 7152AM-02LF 7152AM-02LFT 7152AMI-02* 7152AMI-02T* 7152AMI-02LF 7152AMI-02LFT 7152AM-11* 7152AM-11T* 7152AM-11LF 7152AM-11LFT 7152AMI-11* 7152AMI-11T* 7152AMI-11LF 7152AMI-11LFT

Marking
7152AM02 152AM02L 152AMI02 52AMI02L 7152AM11 7152A11L 7152AI11 152AI11L

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS SPREAD SPECTRUM CLOCK GENERATOR

ICS7152A SPREAD SPECTRUM CLOCK GENERATOR

Originator J. Sarma

SSCG

IDT / ICS SPREAD SPECTRUM CLOCK GENERATOR

ICS7152A SPREAD SPECTRUM CLOCK GENERATOR

SSCG

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS7152AMI-11T Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS7152AMI-11T 637066