ICS613MT
ICS613MT Datasheet
ICS613
| Part | Datasheet |
|---|---|
ICS613MT |
ICS613MT (pdf) |
| Related Parts | Information |
|---|---|
|
ICS613M |
ICS613M |
| PDF Datasheet Preview |
|---|
| LOW PHASE NOISE CLOCK MULTIPLIER DATASHEET ICS613 The ICS613 is a low cost, low phase noise, high performance clock synthesizer for any applications that require low phase noise and low jitter. It is IDT’s lowest phase noise multiplier. Using IDT’s patented analog and digital Phase Locked Loop PLL techniques, the chip can accept a 25 MHz crystal or clock input, and produces output clocks up to MHz. The chip has separate power supplies for the clock outputs, allowing each output to be run at different voltages. It also allows the core of the chip to operate at V, while the output clocks run at either V or V. • Packaged in 16 pin SOIC • Available in Pb lead free package • Uses a fundamental 25 MHz crystal or clock • Operating voltage of V • Separate output voltage supplies which can run at V • Output clocks up to MHz • Low phase noise -110 dBc/Hz at 10 kHz • Low jitter of 36 ps one sigma • Advanced, low power, sub-micron CMOS process NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram X1/ICLK Crystal or clock input X2 Capacitors must be used with a crystal input Crystal Oscillator Reference Divider 3 S2:SO 2 VDD Phase Comparator, Charge Pump, and Loop Filter VCO Divider 5 GND VDDO1 Output Divider CLK1 CLK2 VDDO2 IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER ICS613 ICS613 LOW PHASE NOISE CLOCK MULTIPLIER Pin Assignment X1/ICLK VDDO2 CLK2 VDDO1 CLK1 16 Pin 150 mil SOIC CLOCK MULTIPLIER Clock Select Table S2 S1 S0 Input Output CLK1 and CLK2 Ordering Information Part / Order Number 613M* 613MT* 613MLF 613MLFT Marking ICS613M ICS613MLF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 16 pin SOIC 16 pin SOIC 16 pin SOIC 16 pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LOW PHASE NOISE CLOCK MULTIPLIER ICS613 ICS613 LOW PHASE NOISE CLOCK MULTIPLIER CLOCK MULTIPLIER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA |
| More datasheets: ICS93777BFIT | KSE703STU | KSE701STU | KSE700STU | KSE700S | KSE702STU | KSE703S | KSE702S | DCME37SZNMBK52 | ICS613M |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS613MT Datasheet file may be downloaded here without warranties.