ICS556G-03I

ICS556G-03I Datasheet

ICS556-03

Part	Datasheet
ICS556G-03I	ICS556G-03I (pdf)

Related Parts	Information
ICS556G-03IT	ICS556G-03IT
ICS556M-04IT	ICS556M-04IT
ICS556M-04I	ICS556M-04I

PDF Datasheet Preview
QUAD LVDS OSCILLATOR/BUFFER DATASHEET ICS556-03 The ICS556-03 is a clock oscillator with quad LVDS outputs. Using a standard 25 MHz crystal, no additional external components are required to generate quad LVDS outputs at 25 MHz. This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed. • Packaged in 16-pin TSSOP • Requires no external components • Low Phase Jitter <1ps from 10 kHz to 10 MHz • Quad, Differential LVDS outputs • Operating voltage of Volt • Advanced, low-power, sub-micron CMOS process NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram EN1 EN2 EN3 EN4 25MHz Crystal Oscillator CLKA CLKB CLKC CLKD LVDS IDT / ICS QUAD LVDS OSCILLATOR/BUFFER ICS556-03 QUAD LVDS OSCILLATOR/BUFFER Pin Assignment EN1 1 VDD 2 EN2 7 16 EN4 15 EN3 14 D 13 D 12 C 11 C 10 GND 9 X1 16-Pin 150 mil SOIC LVDS CRYSTAL BUFFER Pin Descriptions Pin Number 2 3 4 5 6 7 8 9 10 11 12 13 Pin Name VDD A B X2 X1 GND C D Pin Type Pin Description Input Enable pin for Outputs A and A. EN1 high enables A, A outputs. EN1 low tri states A, A outputs. No Pull-Up resistor. Power supply. Connect to V. Output Differential clock output. Output Inverting differential clock output. Output Inverting differential clock output. Output Differential clock output. Input Enable pin for Outputs B and B. EN2 high enables B, B outputs. EN2 low tri states B, B outputs. No Pull-Up resistor. Input Crystal connection. Input Crystal input. Power Connect to ground. Ordering Information SEATING PLANE Part / Order Number 556G-03I* 556G-03IT* 556G-03ILF 556G-03ILFT Marking ICS556-03I ICS556-03I 55603ILF Shipping/Packaging Tubes Tape and Reel Tubes Tape and Reel Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP Temperature -40° to +85°C -40° to +85°C -40° to +85°C -40° to +85°C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 “LF” denotes Pb free packaging, RoHS compliant While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS QUAD LVDS OSCILLATOR/BUFFER ICS556-03 QUAD LVDS OSCILLATOR/BUFFER LVDS CRYSTAL BUFFER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

QUAD LVDS OSCILLATOR/BUFFER

DATASHEET

ICS556-03

The ICS556-03 is a clock oscillator with quad LVDS outputs. Using a standard 25 MHz crystal, no additional external components are required to generate quad LVDS outputs at 25 MHz.

This product is intended for clock generation. It has low output jitter variation in the output period , but input to output skew and jitter are not defined nor guaranteed.
• Packaged in 16-pin TSSOP
• Requires no external components
• Low Phase Jitter <1ps from 10 kHz to 10 MHz
• Quad, Differential LVDS outputs
• Operating voltage of Volt
• Advanced, low-power, sub-micron CMOS process

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

EN1 EN2 EN3 EN4
25MHz

Crystal Oscillator

CLKA CLKB CLKC CLKD

LVDS

IDT / ICS QUAD LVDS OSCILLATOR/BUFFER

ICS556-03 QUAD LVDS OSCILLATOR/BUFFER

Pin Assignment

EN1 1

VDD 2

EN2 7
16 EN4 15 EN3 14 D 13 D 12 C 11 C 10 GND 9 X1
16-Pin 150 mil SOIC

LVDS CRYSTAL BUFFER

Pin Descriptions

Pin Number
2 3 4 5 6 7
8 9 10 11 12 13

Pin Name

VDD A B

X2 X1 GND C D

Pin Type

Pin Description

Input Enable pin for Outputs A and A. EN1 high enables A, A outputs. EN1 low tri states A, A outputs. No Pull-Up resistor.

Power supply. Connect to V.

Output Differential clock output.

Output Inverting differential clock output.

Output Inverting differential clock output.

Output Differential clock output.

Input Enable pin for Outputs B and B. EN2 high enables B, B outputs. EN2 low tri states B, B outputs. No Pull-Up resistor.

Input Crystal connection.

Input Crystal input.

Power Connect to ground.
Ordering Information

SEATING PLANE

Part / Order Number
556G-03I* 556G-03IT* 556G-03ILF 556G-03ILFT

Marking

ICS556-03I ICS556-03I 55603ILF

Shipping/Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP

Temperature
-40° to +85°C -40° to +85°C -40° to +85°C -40° to +85°C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01
“LF” denotes Pb free packaging, RoHS compliant

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS QUAD LVDS OSCILLATOR/BUFFER

ICS556-03 QUAD LVDS OSCILLATOR/BUFFER

LVDS CRYSTAL BUFFER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS556G-03I Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS556G-03I 637011