ICS527R-02T

ICS527R-02T Datasheet

CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER ICS527-02

Part	Datasheet
ICS527R-02T	ICS527R-02T (pdf)

Related Parts	Information
ICS527R-02	ICS527R-02

PDF Datasheet Preview
DATASHEET CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER ICS527-02 The ICS527-02 Clock Slicer is the most flexible way to generate a CMOS output clock from a PECL input clock with zero skew. The user can easily configure the device to produce nearly any output clock that is multiplied or divided from the input clock. The part supports non-integer multiplications and divisions. A SYNC pulse indicates when the rising clock edges are aligned with zero skew. Using Phase-Locked Loop PLL techniques, the device accepts an input clock up to 200 MHz and produces an output clock up to 160 MHz. The ICS527-02 aligns rising edges on PECLIN with FBIN at a ratio determined by the reference and feedback dividers. For a PECL input and output clock with zero delay, use the ICS527-04. For a CMOS input and PECL output with zero delay, use the ICS527-03. • Packaged as 28-pin SSOP 150 mil body • Synchronizes fractional clocks rising edges • PECL IN to CMOS OUT • Pin selectable dividers • Zero input to output skew • User determines the output software needed • Slices frequency or period • Input clock frequency of MHz to 200 MHz • Output clock frequencies from 4 MHz to 160 MHz • Very low jitter • Duty cycle of 45/55 • Operating voltage of V • Advanced, low-power CMOS process • Industrial temperature version available NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram PECLIN R6:R0 7 Reference Divider FBIN Feedback Divider 7 F6:F0 2 VDD Phase Comparator, Charge Pump, and Loop Filter VCO SYNC 2 GND PDTS Output Divider 2 S1:S0 33 ohm CLK1 Divide DIV2 33 ohm CLK2 Feedback can come from CLK1 or CLK2 not both IDT / ICS CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER 1 ICS527-02 CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER PECL ZDB AND MULTIPLIER/DIVIDER Pin Assignment D IV 2 P E C LIN P E C LIN O E C LK 2 CLK1 Ordering Information Part / Order Number 527R-02* 527R-02T* 527R-02I* 527R-02IT* 527R-02LF 527R-02LFT 527R-02ILF 527R-02ILFT Marking ICS527R-02 ICS527R-02 ICS527R-02I ICS527R-02I 527R02LF 527R02ILF Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP Temperature 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER 9 ICS527-02 CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER PECL ZDB AND MULTIPLIER/DIVIDER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

DATASHEET

CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER ICS527-02

The ICS527-02 Clock Slicer is the most flexible way to generate a CMOS output clock from a PECL input clock with zero skew. The user can easily configure the device to produce nearly any output clock that is multiplied or divided from the input clock. The part supports non-integer multiplications and divisions. A SYNC pulse indicates when the rising clock edges are aligned with zero skew. Using Phase-Locked Loop PLL techniques, the device accepts an input clock up to 200 MHz and produces an output clock up to 160 MHz.

The ICS527-02 aligns rising edges on PECLIN with FBIN at a ratio determined by the reference and feedback dividers.

For a PECL input and output clock with zero delay, use the ICS527-04.

For a CMOS input and PECL output with zero delay, use the ICS527-03.
• Packaged as 28-pin SSOP 150 mil body
• Synchronizes fractional clocks rising edges
• PECL IN to CMOS OUT
• Pin selectable dividers
• Zero input to output skew
• User determines the output software
needed
• Slices frequency or period
• Input clock frequency of MHz to 200 MHz
• Output clock frequencies from 4 MHz to 160 MHz
• Very low jitter
• Duty cycle of 45/55
• Operating voltage of V
• Advanced, low-power CMOS process
• Industrial temperature version available

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

PECLIN

R6:R0 7

Reference Divider

FBIN

Feedback Divider
7 F6:F0
2 VDD

Phase Comparator, Charge Pump, and

Loop Filter

VCO SYNC
2 GND

PDTS

Output Divider
2 S1:S0
33 ohm

CLK1

Divide

DIV2
33 ohm

CLK2

Feedback can come from CLK1 or CLK2 not both

IDT / ICS CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER 1

ICS527-02 CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER

PECL ZDB AND MULTIPLIER/DIVIDER

Pin Assignment

D IV 2

P E C LIN

P E C LIN

O E C LK 2

CLK1
Ordering Information

Part / Order Number
527R-02* 527R-02T* 527R-02I* 527R-02IT* 527R-02LF 527R-02LFT 527R-02ILF 527R-02ILFT

Marking

ICS527R-02 ICS527R-02 ICS527R-02I ICS527R-02I 527R02LF 527R02ILF

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP

Temperature
0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER 9

ICS527-02 CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER

PECL ZDB AND MULTIPLIER/DIVIDER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS527R-02T Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS527R-02T 637000