ICS513MT

ICS513MT Datasheet

ICS513

Part	Datasheet
ICS513MT	ICS513MT (pdf)

Related Parts	Information
ICS513M	ICS513M

PDF Datasheet Preview
LOCO PLL CLOCK GENERATOR DATASHEET ICS513 The ICS513 LOCOTM is the most cost effective way to generate a high quality, high frequency clock output from a MHz crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop PLL techniques, the device uses a standard, inexpensive crystal to produce output clocks up to 100 MHz. Stored in the chip’s ROM is the ability to generate five different output frequencies, allowing one chip to work in different speed processor systems. The device also has a power-down mode that turns off the clock outputs when both select pins are low. In this mode, the internal PLL is not running. Block Diagram • Packaged as 8-pin SOIC or die • Available in Pb lead free package • IDT’s lowest cost PLL clock plus reference • Produces common computer frequencies • Input crystal frequency typically MHz • Output clock frequencies up to 100 MHz from a MHz crystal or input clock • Low jitter of 40 ps one sigma • Compatible with all popular CPUs • Duty cycle of 45/55 up to 200 MHz • Custom frequencies available • Operating voltage of V to V • Power-down mode turns off chip • 25 mA drive capability at TTL levels • Advanced, low-power CMOS process NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 S1:0 2 PLL Clock Synthesis and Control Circuitry X1/ICLK MHz crystal Crystal or clock input Oscillator Optional crystal capacitors IDT / ICS LOCO PLL CLOCK GENERATOR ICS513 ICS513 LOCO PLL CLOCK GENERATOR CLOCK MULTIPLIER Pin Assignment X1/ICLK 1 VDD 2 GND 3 REF 4 8 X2 7 S1 6 S0 5 CLK 8-pi n 150 mi l SOI C Clock Decoding Table MHz with MHz Crystal or Clock Input S1 S0 0 Power-down CLK Multiplier Accuracy 1 ppm 1 ppm 0 ppm 0 = connect directly to ground 1 = connect directly to VDD M = leave unconnected floating CLK and REF stop low in power-down state Pin Descriptions Number Name XI/ICLK Pin Type Input Power Output Tri-level Input Tri-level Input Ordering Information A1 -C- SEATING PLANE h x 45 Part / Order Number 513M* 513MT* 513MLF 513MLFT Marking ICS513M ICS513ML Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 “LF” denotes Pb lead free package. While the information presented herein has been checked for both accuracy and reliability, Integrated Deviec Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LOCO PLL CLOCK GENERATOR ICS513 ICS513 LOCO PLL CLOCK GENERATOR CLOCK MULTIPLIER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support <product line email> <product line phone> Corporate Headquarters Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S. Asia Pacific and Japan Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505 Europe IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

LOCO PLL CLOCK GENERATOR

DATASHEET

ICS513

The ICS513 LOCOTM is the most cost effective way to generate a high quality, high frequency clock output from a MHz crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop PLL techniques, the device uses a standard, inexpensive crystal to produce output clocks up to 100 MHz. Stored in the chip’s ROM is the ability to generate five different output frequencies, allowing one chip to work in different speed processor systems. The device also has a power-down mode that turns off the clock outputs when both select pins are low. In this mode, the internal PLL is not running.

Block Diagram
• Packaged as 8-pin SOIC or die
• Available in Pb lead free package
• IDT’s lowest cost PLL clock plus reference
• Produces common computer frequencies
• Input crystal frequency typically MHz
• Output clock frequencies up to 100 MHz from a

MHz crystal or input clock
• Low jitter of 40 ps one sigma
• Compatible with all popular CPUs
• Duty cycle of 45/55 up to 200 MHz
• Custom frequencies available
• Operating voltage of V to V
• Power-down mode turns off chip
• 25 mA drive capability at TTL levels
• Advanced, low-power CMOS process

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

S1:0 2

PLL Clock

Synthesis
and Control

Circuitry

X1/ICLK

MHz crystal

Crystal
or clock input

Oscillator

Optional crystal capacitors

IDT / ICS LOCO PLL CLOCK GENERATOR

ICS513

ICS513 LOCO PLL CLOCK GENERATOR

CLOCK MULTIPLIER

Pin Assignment

X1/ICLK 1 VDD 2 GND 3 REF 4
8 X2 7 S1 6 S0 5 CLK
8-pi n 150 mi l SOI C

Clock Decoding Table MHz with MHz Crystal or Clock Input

S1 S0
0 Power-down CLK

Multiplier

Accuracy
1 ppm 1 ppm 0 ppm
0 = connect directly to ground 1 = connect directly to VDD M = leave unconnected floating CLK and REF stop low in power-down state

Pin Descriptions

Number Name

XI/ICLK

Pin Type

Input Power Output Tri-level Input

Tri-level Input
Ordering Information

A1 -C-

SEATING PLANE
h x 45

Part / Order Number
513M* 513MT* 513MLF 513MLFT

Marking

ICS513M ICS513ML

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01
“LF” denotes Pb lead free package.

While the information presented herein has been checked for both accuracy and reliability, Integrated Deviec Technology IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LOCO PLL CLOCK GENERATOR

ICS513

ICS513 LOCO PLL CLOCK GENERATOR

CLOCK MULTIPLIER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support
<product line email> <product line phone>

Corporate Headquarters

Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 United States 800 345 7015 +408 284 8200 outside U.S.

Asia Pacific and Japan

Integrated Device Technology Singapore 1997 Pte. Ltd. Reg. No. 199707558G 435 Orchard Road #20-03 Wisma Atria Singapore 238877 +65 6 887 5505

Europe

IDT Europe, Limited Prime House Barnett Wood Lane Leatherhead, Surrey United Kingdom KT22 7DE +44 1372 363 339
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS513MT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS513MT 636993