ICS270PGT

ICS270PGT Datasheet

ICS270

Part	Datasheet
ICS270PGT	ICS270PGT (pdf)

Related Parts	Information
ICS270PGIT	ICS270PGIT
ICS270PG	ICS270PG
ICS270PGI	ICS270PGI

PDF Datasheet Preview
TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK DATASHEET ICS270 The ICS270 field programmable VCXO clock synthesizer generates up to eight high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. It is designed to replace crystals and crystal oscillators in most electronic systems. Using IDT’s VersaClockTM software to configure PLLs and outputs, the ICS270 contains a One-Time Programmable OTP ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of four low-skew outputs. Using Phase-Locked Loop PLL techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost. The ICS270 is also available in factory programmed custom versions for high-volume applications. • Packaged as 20-pin TSSOP • Eight addressable registers • Replaces multiple crystals and oscillators • Output frequencies up to 200 MHz at V • Input crystal frequency of 5 to 27 MHz • Up to eight reference outputs • Up to two sets of four low-skew outputs • Operating voltages of V • Controllable output drive levels • Advanced, low-power CMOS process • Available in Pb lead free packaging NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Block Diagram S2:S0 3 OTP ROM with PLL Values X1 Crystal Voltage Controlled Crystal Oscillator External capacitors are required. VDD 3 PLL1 PLL2 PLL3 Divide Logic and Output Enable Control GND 2 PDTS CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8 IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK ICS270 ICS270 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK EPROM VCXO AND SYNTHESIZER Pin Assignment VIN 1 S0 2 S1 3 VDD 4 CLK1 5 CLK2 6 CLK3 7 CLK4 8 GND 9 X1 10 20 S2 19 VDD 18 PDTS 17 GND 16 CLK8 15 CLK7 14 CLK6 13 CLK5 12 VDD 11 X2 20 pin 173 mil TSSOP Pin Descriptions Pin Number 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 Pin Name S0 S1 VDD CLK1 CLK2 CLK3 CLK4 GND X1 X2 VDD CLK5 CLK6 CLK7 CLK8 GND PDTS VDD S2 Pin Type Input Input Power Output Power XI XO Power Output Power Ordering Information Part / Order Number 270PG* 270PGI* 270PGLF 270PGILF 270G-XX* 270GI-XX* 270G-XXLF 270GI-XXLF 270G-XXT* 270GI-XXT* 270G-XXLFT 270GI-XXLFT Marking See page 8 above 270G-XX 270GI-XX 270GXXL 270GIXXL 270G-XX 270GIXX 270GXXL 270GIXXL Shipping Packaging Tubes Tape and Reel Tape and Reel Tape and Reel Tape and Reel Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP Temperature 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. The ICS270G-XX, ICS270G-XXLF, ICS270GI-XX, and ICS270GI-XXLF are factory programmed versions of the ICS270PG, ICS270PGLF, ICS270PGI, and ICS270PGLF. A unique “-XX” suffix is assigned by the factory for each custom configuration, and a separate data sheet is kept on file. For more information on custom part numbers programmed at the factory, please contact your local IDT sales and marketing representative. While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. VersaClockTM is a trademark of Integrated Device Technology, Inc. All rights reserved. IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK ICS270 ICS270 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK EPROM VCXO AND SYNTHESIZER Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK

DATASHEET

ICS270

The ICS270 field programmable VCXO clock synthesizer generates up to eight high-quality, high-frequency clock outputs including multiple reference clocks from a low-frequency crystal input. It is designed to replace crystals and crystal oscillators in most electronic systems. Using IDT’s VersaClockTM software to configure PLLs and outputs, the ICS270 contains a One-Time Programmable OTP ROM for field programmability. Programming features include VCXO, eight selectable configuration registers and up to two sets of four low-skew outputs.

Using Phase-Locked Loop PLL techniques, the device runs from a standard fundamental mode, inexpensive crystal, or clock. It can replace VCXOs, multiple crystals and oscillators, saving board space and cost.

The ICS270 is also available in factory programmed custom versions for high-volume applications.
• Packaged as 20-pin TSSOP
• Eight addressable registers
• Replaces multiple crystals and oscillators
• Output frequencies up to 200 MHz at V
• Input crystal frequency of 5 to 27 MHz
• Up to eight reference outputs
• Up to two sets of four low-skew outputs
• Operating voltages of V
• Controllable output drive levels
• Advanced, low-power CMOS process
• Available in Pb lead free packaging

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Block Diagram

S2:S0 3

OTP ROM with PLL Values

X1 Crystal

Voltage Controlled

Crystal Oscillator

External capacitors are required.

VDD 3

PLL1 PLL2 PLL3

Divide Logic and Output Enable Control

GND 2

PDTS

CLK1 CLK2 CLK3 CLK4 CLK5 CLK6 CLK7 CLK8

IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK

ICS270

ICS270 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK

EPROM VCXO AND SYNTHESIZER

Pin Assignment

VIN 1 S0 2 S1 3 VDD 4 CLK1 5 CLK2 6 CLK3 7 CLK4 8 GND 9 X1 10
20 S2 19 VDD 18 PDTS 17 GND 16 CLK8 15 CLK7 14 CLK6 13 CLK5 12 VDD 11 X2
20 pin 173 mil TSSOP

Pin Descriptions

Pin Number
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
19 20

Pin Name

S0 S1 VDD CLK1 CLK2 CLK3 CLK4 GND X1 X2 VDD CLK5 CLK6 CLK7 CLK8 GND

PDTS

VDD S2

Pin Type

Input

Input Power Output Power

XI XO Power Output Power
Ordering Information

Part / Order Number
270PG* 270PGI* 270PGLF 270PGILF 270G-XX* 270GI-XX* 270G-XXLF 270GI-XXLF 270G-XXT* 270GI-XXT* 270G-XXLFT 270GI-XXLFT

Marking

See page 8 above
270G-XX 270GI-XX 270GXXL 270GIXXL 270G-XX 270GIXX 270GXXL 270GIXXL

Shipping Packaging

Tubes Tape and Reel Tape and Reel Tape and Reel Tape and Reel

Package
20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP

Temperature
0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C 0 to +70° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

The ICS270G-XX, ICS270G-XXLF, ICS270GI-XX, and ICS270GI-XXLF are factory programmed versions of the ICS270PG, ICS270PGLF, ICS270PGI, and ICS270PGLF. A unique “-XX” suffix is assigned by the factory for each custom configuration, and a separate data sheet is kept on file. For more information on custom part numbers programmed at the factory, please contact your local IDT sales and marketing representative.

While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. VersaClockTM is a trademark of Integrated Device Technology, Inc. All rights reserved.

IDT / ICS TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK

ICS270

ICS270 TRIPLE PLL FIELD PROGRAMMABLE VCXO CLOCK

EPROM VCXO AND SYNTHESIZER

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS270PGT Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS270PGT 636967