ICS180MI-01T

ICS180MI-01T Datasheet

ICS180-01

Part	Datasheet
ICS180MI-01T	ICS180MI-01T (pdf)

Related Parts	Information
ICS180MI-01	ICS180MI-01
ICS180M-01	ICS180M-01
ICS180M-01T	ICS180M-01T

PDF Datasheet Preview
DATASHEET LOW EMI CLOCK GENERATOR ICS180-01 The ICS180-01 generates a low EMI output clock from a clock or crystal input. The device uses IDT’s proprietary mix of analog and digital Phase Locked Loop PLL technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB. The ICS180-01 offers down spread selection of and Refer to the MK1714-01/02 for the widest selection of input frequencies and multipliers. IDT offers a complete line of EMI reducing clock generators. Consult us when you need to remove crystals and oscillators from your board. • Pin and function compatible to Cypress W180-01 • Packaged in 8-pin SOIC • Provides a spread spectrum output clock • Accepts a clock input and provides same frequency dithered output • Input frequency of 8 to 28 MHz • Peak reduction by 7dB - 14dB typical on 3rd - 19th odd harmonics • Spread percentage selection for and • Operating voltage of V and 5 V • Advanced, low-power CMOS process • Available in Pb lead free package • Industrial temperature range available Block Diagram NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01 FS2:1 SS% X1/CLKIN X2 Clock Buffer/ Crystal Oscillator PLL Clock Synthesis and Spread Spectrum Circuitry IDT / ICS LOW EMI CLOCK GENERATOR ICS180-01 LOW EMI CLOCK GENERATOR SSCG Pin Assignment Spread Spectrum Select Table X1/CLKIN 1 X2 2 GND 3 SS% 4 8 FS2 7 FS1 6 VDD 5 CLKOUT 8-pin 150 mil SOIC SS% Pin 4 Spread Direction Down Spread Percentage % 0 = connect to GND 1 = connect directly to VDD Note SS% pin has an internal pull-up resistor Frequency Range Selection Table FS2 Pin 8 FS1 Pin 7 0 1 0 1 Frequency Range Selection MHz 8-10-15-18-28 Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 Ordering Information A1 -C- SEATING PLANE Part / Order Number 180M-01* 180M-01T* 180M-01LF 180M-01LFT 180MI-01* 180MI-01T* 180MI-01LF 180MI-01LFT Marking see page 6 see page 6 Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC Temperature 0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C *NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01. Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments. IDT / ICS LOW EMI CLOCK GENERATOR ICS180-01 LOW EMI CLOCK GENERATOR SSCG Innovate with IDT and accelerate your future networks. Contact: For Sales 800-345-7015 408-284-8200 Fax 408-284-2775 For Tech Support Corporate Headquarters Integrated Device Technology, Inc. 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

PDF Datasheet Preview

DATASHEET

LOW EMI CLOCK GENERATOR

ICS180-01

The ICS180-01 generates a low EMI output clock from a clock or crystal input. The device uses IDT’s proprietary mix of analog and digital Phase Locked Loop PLL technology to spread the frequency spectrum of the output, thereby reducing the frequency amplitude peaks by several dB.

The ICS180-01 offers down spread selection of and Refer to the MK1714-01/02 for the widest selection of input frequencies and multipliers.

IDT offers a complete line of EMI reducing clock generators. Consult us when you need to remove crystals and oscillators from your board.
• Pin and function compatible to Cypress W180-01
• Packaged in 8-pin SOIC
• Provides a spread spectrum output clock
• Accepts a clock input and provides same frequency
dithered output
• Input frequency of 8 to 28 MHz
• Peak reduction by 7dB - 14dB typical on 3rd - 19th
odd harmonics
• Spread percentage selection for and
• Operating voltage of V and 5 V
• Advanced, low-power CMOS process
• Available in Pb lead free package
• Industrial temperature range available

Block Diagram

NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01

FS2:1 SS%

X1/CLKIN X2

Clock Buffer/ Crystal

Oscillator

PLL Clock Synthesis and Spread Spectrum Circuitry

IDT / ICS LOW EMI CLOCK GENERATOR

ICS180-01 LOW EMI CLOCK GENERATOR

SSCG

Pin Assignment

Spread Spectrum Select Table

X1/CLKIN 1 X2 2

GND 3 SS% 4
8 FS2 7 FS1 6 VDD 5 CLKOUT
8-pin 150 mil SOIC

SS% Pin 4

Spread Direction

Down

Spread Percentage %
0 = connect to GND 1 = connect directly to VDD Note SS% pin has an internal pull-up resistor

Frequency Range Selection Table

FS2 Pin 8

FS1 Pin 7
0 1 0 1

Frequency Range Selection MHz
8-10-15-18-28

Pin Descriptions

Pin Number
1 2 3 4 5 6 7 8
Ordering Information

A1 -C-

SEATING PLANE

Part / Order Number
180M-01* 180M-01T* 180M-01LF 180M-01LFT 180MI-01* 180MI-01T* 180MI-01LF 180MI-01LFT

Marking
see page 6
see page 6

Shipping Packaging

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Tubes Tape and Reel

Package
8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC

Temperature
0 to +70° C 0 to +70° C 0 to +70° C 0 to +70° C -40 to +85° C -40 to +85° C -40 to +85° C -40 to +85° C
*NOTE EOL for non-green parts to occur on 5/13/10 per PDN U-09-01.

Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.

While the information presented herein has been checked for both accuracy and reliability, IDT assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.

IDT / ICS LOW EMI CLOCK GENERATOR

ICS180-01 LOW EMI CLOCK GENERATOR

SSCG

Innovate with IDT and accelerate your future networks. Contact:

For Sales
800-345-7015 408-284-8200 Fax 408-284-2775

For Tech Support

Corporate Headquarters

Integrated Device Technology, Inc.
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ICS180MI-01T Datasheet file may be downloaded here without warranties.

Datasheet ID: ICS180MI-01T 636945