495-24.8832-2JB4I8

495-24.8832-2JB4I8 Datasheet

Part / Order Number 495-24.8832-2JB4I 495-24.8832-2JB4I8

Part	Datasheet
495-24.8832-2JB4I8	495-24.8832-2JB4I8 (pdf)

Related Parts	Information
495-24.8832-2JB4I	495-24.8832-2JB4I

PDF Datasheet Preview
Ceramic, Seam-Sealed, SMD, Crystal For use with IDT’s VCXO-based Synchronization PLLs Specifications DATASHEET Parameters Ratings/Units Frequency Resonance Mode Fundamental Frequency Tolerance 25°C ±10 PPM Frequency Stability, ref 25°C Over Operating Temperature Range ±20 PPM Temperature Range Operating TOPR Storage TSTG -40°C ~ +85°C -40°C ~ +85°C Equivalent Series Resistance ESR 40 Ohms Shunt Capacitance CO Load Capacitance CL 10 pF Drive Level Pullability ~ pF ±80 PPM Aging 10 years ±11 PPM Maximum Soldering Temperature/Time 260°C / 10 seconds Moisture Sensitivity Level MSL Termination Finish Weight Typ Note Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication however, no responsibility is assumed by IDT for inaccuracies. All specifications subject to change without notice. Package Outline and Dimensions JB4 Ordering Information Part / Order Number 495-24.8832-2JB4I 495-24.8832-2JB4I8 Shipping Packaging Cut-Tape Tape and Reel Package x mm JB4 x mm JB4 Temperature -40 to +85 qC -40 to +85 qC 2015 Integrated Device Technology, Inc. Corporate Headquarters 6024 Silver Creek Valley Road San Jose, CA 95138 USA Sales 1-800-345-7015 or 408-284-8200 Fax 408-284-2775 Tech Support email: DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties. IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT. Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners. Copyright 2015 Integrated Device Technology, Inc.. All rights reserved.

PDF Datasheet Preview

Ceramic, Seam-Sealed, SMD, Crystal

For use with IDT’s VCXO-based Synchronization PLLs

Specifications

DATASHEET

Parameters

Ratings/Units

Frequency

Resonance Mode

Fundamental

Frequency Tolerance 25°C
±10 PPM

Frequency Stability, ref 25°C Over Operating Temperature Range
±20 PPM

Temperature Range Operating TOPR Storage TSTG
-40°C ~ +85°C -40°C ~ +85°C

Equivalent Series Resistance ESR
40 Ohms

Shunt Capacitance CO

Load Capacitance CL
10 pF

Drive Level

Pullability ~ pF
±80 PPM

Aging 10 years
±11 PPM

Maximum Soldering Temperature/Time
260°C / 10 seconds

Moisture Sensitivity Level MSL

Termination Finish

Weight Typ

Note Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication however, no responsibility is assumed by IDT for inaccuracies. All specifications subject to change without notice.

Package Outline and Dimensions JB4
Ordering Information

Part / Order Number 495-24.8832-2JB4I 495-24.8832-2JB4I8

Shipping Packaging Cut-Tape

Tape and Reel

Package x mm JB4 x mm JB4

Temperature -40 to +85 qC -40 to +85 qC
2015 Integrated Device Technology, Inc.

Corporate Headquarters 6024 Silver Creek Valley Road San Jose, CA 95138 USA

Sales 1-800-345-7015 or 408-284-8200 Fax 408-284-2775

Tech Support email:

DISCLAIMER Integrated Device Technology, Inc. IDT and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Product specification subject to change without notice. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.

Copyright 2015 Integrated Device Technology, Inc.. All rights reserved.

More datasheets: DBMM17H2PN | PMT3(310)07504 | PMT3(310)23001 | PMT3(310)09004 | PMT3(310)25010 | PMT3(310)35010 | 952911BGLF | TXN22125D000000 | AXA010A0X3 | 495-24.8832-2JB4I

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 495-24.8832-2JB4I8 Datasheet file may be downloaded here without warranties.

Datasheet ID: 495-24.8832-2JB4I8 636600