IPS514G

IPS514G Datasheet

IPS511G/IPS512G/IPS514G

Part	Datasheet
IPS514G	IPS514G (pdf)

PDF Datasheet Preview
Data Sheet No.PD60156-J IPS511G/IPS512G/IPS514G FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH • Over temperature protection with auto-restart • Short-circuit protection current limit • Active clamp • E.S.D protection • Status feedback • Open load detection • Logic gound isolated from power ground The IPS511G/IPS512G/IPS514G are fully protected five terminal high side switches with built in short-circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the high side switch if the junction temperature exceeds Tshutdown. It will automatically restart after the junction has cooled 7oC below Tshutdown. A diagnostic pin is provided for status feedback of short-circuit, over-temperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load ground. Typical Connection Product Summary Rds on V clamp I Limit V open load max 50V 5A 3V Truth Table Op. Conditions In Out Normal Normal Open load Open load Over current H L limiting Over current Over-temperature H L cycling Over-temperature L Available Package Status feedback Logic signal + VCC Output pull-up resistor Logic control Load Logic Gnd Load Gnd 8 Lead SOIC Single IPS511G 16 Lead SOIC Dual IPS512G 28 Lead SOIC WB Quad IPS514G IPS511G/IPS512G/IPS514G Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to GROUND lead. Tj = 25oC unless otherwise specified . Symbol Parameter Min. Vout Voffset Vin Iin, max

PDF Datasheet Preview

Data Sheet No.PD60156-J

IPS511G/IPS512G/IPS514G

FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
• Over temperature protection with auto-restart
• Short-circuit protection current limit
• Active clamp
• E.S.D protection
• Status feedback
• Open load detection
• Logic gound isolated from power ground

The IPS511G/IPS512G/IPS514G are fully protected five terminal high side switches with built in short-circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is controlled when it reaches Ilim value. The current limitation is activated until the thermal protection acts. The over-temperature protection turns off the high side switch if the junction temperature exceeds Tshutdown. It will automatically restart after the junction has cooled 7oC below Tshutdown. A diagnostic pin is provided for status feedback of short-circuit, over-temperature and open load detection. The double level shifter circuitry allows large offsets between the logic ground and the load ground.

Typical Connection

Product Summary

Rds on V clamp I Limit V open load
max 50V 5A 3V

Truth Table

Op. Conditions In Out

Normal

Normal

Open load

Open load

Over current

H L limiting

Over current

Over-temperature H L cycling

Over-temperature L

Available Package

Status
feedback

Logic signal
+ VCC

Output pull-up resistor

Logic
control

Load

Logic Gnd

Load Gnd
8 Lead SOIC Single IPS511G
16 Lead SOIC Dual

IPS512G
28 Lead SOIC WB Quad IPS514G

IPS511G/IPS512G/IPS514G

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are referenced to GROUND lead. Tj = 25oC unless otherwise specified .

Symbol Parameter

Min.

Vout Voffset Vin Iin, max

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IPS514G Datasheet file may be downloaded here without warranties.

Datasheet ID: IPS514G 639007