V23815-U1306-M130

V23815-U1306-M130 Datasheet

V23814-U1306-M130 V23815-U1306-M130

Part	Datasheet
V23815-U1306-M130	V23815-U1306-M130 (pdf)

Related Parts	Information
V23814-U1306-M130	V23814-U1306-M130

PDF Datasheet Preview
Fiber Optics Parallel Optical Link PAROLI Tx AC, Gbit/s Parallel Optical Link PAROLI Rx AC, Gbit/s V23814-U1306-M130 V23815-U1306-M130 • Power supply V • Low voltage differential signal electrical interface LVDS • 12 electrical data channels • Asynchronous, AC-coupled optical link • 12 optical data channels • Transmission data rate of up to 1600 Mbit/s per channel, total link data rate up to 19 Gbit/s • 850 nm VCSEL array technology • PIN diode array technology • µm graded index multimode fiber ribbon • MT based optical port • SMD technology • Class 1 FDA and IEC Class 1 laser safety compliant Optical Port • Designed for the Simplex MT Connector SMC • Port outside dimensions mm x mm width x height • MT compatible IEC 61754-5 fiber spacing 250 µm and alignment pin spacing 4600 µm • Alignment pins fixed in module port • Integrated mechanical keying • Process plug SMC dimensions included with every module • Cleaning of port and connector interfaces necessary prior to mating is a registered trademark of Infineon Technologies AG Data Sheet 2001-11-28 V23814-U1306-M130 V23815-U1306-M130 Features of the Simplex MT Connector SMC as part of optional PAROLI fiber optic cables • Uses standardized MT ferrule IEC 61754-5 • MT compatible fiber spacing 250 µm and alignment pin spacing 4600 µm • Snap-in mechanism • Ferrule bearing spring loaded • Integrated mechanical keying Applications Telecommunication • Switching equipment • Access network Data Communication • Interframe rack-to-rack • Intraframe board-to-board • On board optical backplane • Interface to SCI and HIPPI 6400 standards Data Sheet 2001-11-28 V23814-U1306-M130 V23815-U1306-M130 Pin Configuration Pin Configuration The numbering conventions for the Tx and Rx modules are the same. Numbering Conventions Transmitter/Receiver Figure 1 Pin Description Transmitter Pin Symbol Level/ Logic Description No. t.b.l.o. Power supply voltage of laser driver to be left open t.b.l.o. to be left open t.b.l.o. to be left open t.b.l.o. to be left open LVCMOS Out Laser Controller Up High = normal operation Low = laser fault or low t.b.l.o. Ground to be left open 10 t.b.l.o. to be left open 13 DI01N LVDS In

PDF Datasheet Preview

Fiber Optics

Parallel Optical Link PAROLI Tx AC, Gbit/s

Parallel Optical Link PAROLI Rx AC, Gbit/s

V23814-U1306-M130 V23815-U1306-M130
• Power supply V
• Low voltage differential signal electrical
interface LVDS
• 12 electrical data channels
• Asynchronous, AC-coupled optical link
• 12 optical data channels
• Transmission data rate of up to 1600 Mbit/s
per channel, total link data rate up to 19 Gbit/s
• 850 nm VCSEL array technology
• PIN diode array technology
• µm graded index multimode fiber ribbon
• MT based optical port
• SMD technology
• Class 1 FDA and IEC Class 1 laser safety compliant

Optical Port
• Designed for the Simplex MT Connector SMC
• Port outside dimensions mm x mm width x height
• MT compatible IEC 61754-5 fiber spacing 250 µm and alignment
pin spacing 4600 µm
• Alignment pins fixed in module port
• Integrated mechanical keying
• Process plug SMC dimensions included with every module
• Cleaning of port and connector interfaces necessary prior to mating
is a registered trademark of Infineon Technologies AG

Data Sheet
2001-11-28

V23814-U1306-M130 V23815-U1306-M130

Features of the Simplex MT Connector SMC as part of optional PAROLI fiber optic cables
• Uses standardized MT ferrule IEC 61754-5
• MT compatible fiber spacing 250 µm and alignment pin spacing 4600 µm
• Snap-in mechanism
• Ferrule bearing spring loaded
• Integrated mechanical keying

Applications Telecommunication
• Switching equipment
• Access network Data Communication
• Interframe rack-to-rack
• Intraframe board-to-board
• On board optical backplane
• Interface to SCI and HIPPI 6400 standards

Data Sheet
2001-11-28

V23814-U1306-M130 V23815-U1306-M130

Pin Configuration

Pin Configuration The numbering conventions for the Tx and Rx modules are the same.

Numbering Conventions Transmitter/Receiver

Figure 1

Pin Description Transmitter

Pin Symbol Level/ Logic Description No.
t.b.l.o.

Power supply voltage of laser driver to be left open
t.b.l.o.
to be left open
t.b.l.o.
to be left open
t.b.l.o.
to be left open

LVCMOS Out Laser Controller Up

High = normal operation

Low = laser fault or low
t.b.l.o.

Ground to be left open
10 t.b.l.o.
to be left open
13 DI01N LVDS In

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived V23815-U1306-M130 Datasheet file may be downloaded here without warranties.

Datasheet ID: V23815-U1306-M130 638858