TDA21102

TDA21102 Datasheet


TDA21102

Part Datasheet
TDA21102 TDA21102 TDA21102 (pdf)
PDF Datasheet Preview
CoreControlTM

Data Sheet

High speed Driver with bootstrapping for dual Power MOSFETs

TDA21102

P-DSO-14-3

Features
• Fast rise and fall times for frequencies up to 2 MHz
• Capable of sinking more than 4 A peak current for lowest switching losses
• Charges the High Side and Low Side gate to V according to PVCC
setting.
• Adjustable High Side and Low Side MOSFET gate drive voltage via PVCC pin for
optimizing ON losses and gate drive losses
• Integrates the bootstrap diode for reducing the part count
• Prevents from cross-conducting by adaptive gate drive control
• High voltage rating on Phase node
• Supports shut-down mode for very low quiescent current through three-state input
• Compatible to standard PWM controller ICs Intersil, Analog Devices
• Floating High Side MOSFET drive
• Ideal for multi-phase Desktop CPU supplies on motherboards and

Type

Package Marking

TDA21102 P-DSO-14-3 21102
Ordering Code Q67042-S4244

Pinout & Description

PWM1 PWM2 GND GATELS1 PVCC PGND GATELS2

Top View

VCC PHASE1 GATGATEHS1 BOOT1 BOOT2 GATEHS2 PHASE2

Number 1 2 3 4

Name PWM1 PWM2 GND GATELS1

PVCC PGND GATELS2

PHASE2

GATEHS2

BOOT2

BOOT1

GATEHS1

PHASE1

Input for the PWM1 controller signal Input for the PWM2 controller signal Ground Gate drive output for the N-Channel Low Side MOSFET Input to adjust the High Side gate drive Power ground return for the Low Side Drivers Gate drive output for the N-Channel Low Side MOSFET To be connected to the junction of the High Side and the Low Side MOSFET 2 Gate drive output for the N-Channel High Side MOSFET Floating bootstrap pin. To be connected to the external bootstrap capacitor to generate the gate drive voltage for the High Side N-Channel MOSFET Floating bootstrap pin. To be connected to the external bootstrap capacitor to generate the gate drive voltage for the High Side N-Channel MOSFET Gate drive output for the N-Channel High Side MOSFET To be connected to the junction of the High Side and the Low Side MOSFET 1 Supply Voltage

Aug 31, 2004

CoreControlTM

Data Sheet

TDA21102

The dual high speed driver is designed to drive a wide range of N-Channel low side and N-Channel high side MOSFETs with varying gate charges. It has a small propagation delay from input to output, short rise and fall times and the same pin configuration as the HIP6602B. In addition it provides several protection features as well as a shut down mode for efficiency reasons. The high breakdown voltage makes it suitable for mobile applications.

Target application

The dual high speed driver is designed to work well in half-bridge type circuits where dual N-Channel MOSFETs are utilized. A circuit designer can fully take advantage of the capabilities in highefficiency, high-density synchronous DC/DC converters that operate at high switching frequencies, e.g. in multi-phase converters for CPU supplies on motherboards and but also in motor drive and class-D amplifier type applications.

Block Diagram

PVCC

BOOT

HS Driver

GATEHS

PWM Control Logic

Shoot Through Protection

LS Driver

PHASE GATELS

Bias

PWM Control Logic

Shoot Through Protection

PVCC

BOOT

HS Driver

GATEHS

PHASE

LS Driver

GATELS GND
More datasheets: DTS12000A230LG | DTS12000A115LG | CA3102E24-6SWF80 | DEME9SA101 | MDM-37PH034L | DBM25SA222 | DBMAM25PA101 | DCMY-37S-A197 | ASCX150DN | MDM-9PH046P


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived TDA21102 Datasheet file may be downloaded here without warranties.

Datasheet ID: TDA21102 638693