SLE 66C321PE MFC5.8

SLE 66C321PE MFC5.8 Datasheet

Security & Chip Card ICs SLE 66C321PE

Part	Datasheet
SLE 66C321PE MFC5.8	SLE 66C321PE MFC5.8 (pdf)

Related Parts	Information
SLE 66C321PE M5.1	SLE 66C321PE M5.1
SLE 66C321PE MFC5.6	SLE 66C321PE MFC5.6

PDF Datasheet Preview
Security & Chip Card ICs SLE 66C321PE 8/16-Bit Security Controller with enhanced instruction set for large memories in µm CMOS Technology 96-Kbytes ROM, 2304 Bytes RAM, 32-Kbytes EEPROM Preliminary Short Product Information SLE 66C321PE Short Product Information Ref. SPI_SLE 66C321PE_0105 This document contains preliminary information on a new product under development. Details are subject to change without notice. Previous Releases: Important: Further information is confidential and on request. Please contact Infineon Technologies AG in Munich, Germany, Security & Chip Card ICs, Tel +49 - 0 89 234-80000 Fax +49 - 0 89 234-81000 E-Mail: Edition 2005 Published by Infineon Technologies AG, CC Applications Group St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG 2002 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. SLE 66C321PE 16-Bit Security Controller with enhanced instruction set for large memories in 0.22µm CMOS Technology, 96-Kbyte ROM, 2304 Bytes RAM, 32-Kbyte EEPROM Features New • 8/16-bit microcomputer in µm CMOS technology • Instruction set opcode compatible with standard SAB 8051 processor • Downward compatibility to existing SLE 66CxxxP products for existing masks without using the new features • Internal Clock with up to 33 MHz Programmable internal frequency PLL x1, x2, x3, x4 and free running mode s . • Adjustable frequency according to available power or required performance • Increased internal clock frequency for maximum performance • New Addressable memory up to 16 Mbyte • New Additional enhanced instructions for direct physical memory access of >64kByte • Typically saves up to 90 % code space and increases execution speed up to 80 • Internal frequency is automatically adjusted to guarantee a given limited power consumption • Two 16-bit Autoreload Timer • Power saving sleep mode • Dedicated, non-standard architecture with execution time 6 times faster than standard SAB 8051 • Ext. Clock freq. 1 up to MHz for int. Clock up to 33 MHz processor at same external clock. Up to 18 times faster using internal frequency PLL x 3 compared to external clock . • New 96 Kbytes User ROM for application programs • 32 Kbytes MicroSlim-EEPROM Ordering Information Type SLE 66C321PE C SLE 66C321PE M5 Package1 Die sawn, unsawn M5.1 Voltage Range Temperature Range Frequency Range int. clock frequency Frequency Range ext. clock frequency 25°C to + 70°C or 25°C to + 85°C Up to 33 MHz 1 MHz - 5 MHz or 1 MHz - MHz For ordering information please refer to the databook and contact your sales representative. 1 available as wire-bonded module M5 for embedding in plastic cards or as die C for customer packaging Preliminary - Short Product Information 5 / 8 Pin Configuration VCC GND SLE 66C321PE Figure 1 Pin Configuration Pin Definitions and Functions Symbol VCC RST CLK GND I/O Function Operating voltage Reset input Processor clock input Ground Bi-directional data port SLE 66C321PE Preliminary - Short Product Information 6 / 8 SLE 66C321PE The SLE66C321PE is one member of the improved 66PE-series of Infineon Technologies and the successor of the SLE66C322P. This high performance security controller is manufactured in advanced µm CMOS technology. It is downward compatible to existing 66P controller derivatives. The well known ECO2000 8/16 bit CPU provides the high efficiency of the SAB 8051 instruction set extended by additional powerful instructions together with enhanced performance, memory sizes and security features compared to existing 66P derivatives. Performance The internal clock frequency can be adjusted to a level up to 33 MHz either as a multiple of 1,2,3,4 to the external frequency or independent of the clock rate of the terminal with the help of the internal clock. It is adjustable according to either available power requirements or required performance: • Increased internal clock frequency for maximum performance, e.g. for high performance with max. frequency in payment applications. • Automatically adjusted frequency for a max. given power consumption, e.g. by GSM or UMTS requirements. New Memory The SLE66C321PE offers 96 Kbytes of User-ROM, 256 byte internal RAM, 2048 byte XRAM and 32 Kbytes MicroSlim-EEPROM, to fulfill the requirements of mainly standard GSM an SDA payment applications. The large ROM size allows to place applications in the ROM-mask and to keep the free for customer data. In addition it saves mask development costs, as one mask may be used for different customer projects. The enhanced Memory Management and Protection Unit allows a secure separation of the operating system and different applications. It allows to separate the memories in application orientated segments, which can be controlled by the OS. Furthermore, the MMU makes a secure downloading of applications possible even after personalization of a card. These new features suit the requirements of the next generation of multi application operating systems. Voltage Clock Reset XRAM EEPROM 96 Kbyte 2 Kbyte 32 Kbyte 16-Bit CPU with MMU & ECO 2000 Instruction Set Sleep Mode Logic Sensors/Filters Voltage Regulator Interrupt Address-/Data Bus two 16-bit Timer Random Number Generator UART Clock generated Figure 2 Block Diagram SLE 66C321PE The new platform is designed to address up to 16Mbyte. However this feature is only available upon request and will clearly require a change in the existing tool environment. In addition, new instructions have been implemented in the design for an efficient direct access of physical memory >64KByte up to16 MByte. Preliminary - Short Product Information 7 / 8 SLE 66C321PE Security features Since the very beginning, security is an integrated part of Infineons product development, as proved by various certificates ITSEC, CC, Proton, VISA, ZKA, Mondex . The so called “integral security concept” for the 66P series ensures: • A secret storage of any confidential code, data and keys • Protection against side channel attacks such as Simple Power Analysis SPA , Differential Power Analysis DPA , • Protection against Differential Fault Analysis DFA , Electromagnetic Emanation Attack EMA and other possible HW or SW attacks Peripherals The CRC module allows the easy generation of checksums according to ISO/IEC 3309 16-Bit-CRC . To minimize the overall power consumption, the chip card controller IC offers a sleep mode. The UART supports the halfduplex transmission protocols T=0 and T=1 according to ISO/IEC All relevant transmission parameters can be adjusted by software, as e.g. the clock division factor, direct/inverse convention and the number of stop bits. Additionally, the I/O port can be driven by communication routines realized in software. Symmetric algorithms can be processed in software. The random number generator RNG is able to supply the CPU with true random numbers on all conditions. The advanced sensor concept includes various sensors for any kind of attack scenarios and even more important a “Life Test ” for sensors. The SLE 66C321PE fulfills all requirements of today's chip card applications, and is especially designed for mainstream GSM applications. In addition it belongs to a powerful platform for multi application cards and support the migration to enhanced GSM/WAP, OTA, GPRS and UMTS value added services.

PDF Datasheet Preview

Security & Chip Card ICs SLE 66C321PE
8/16-Bit Security Controller with enhanced instruction set for large memories in µm CMOS Technology 96-Kbytes ROM, 2304 Bytes RAM, 32-Kbytes EEPROM

Preliminary Short Product Information

SLE 66C321PE Short Product Information

Ref. SPI_SLE 66C321PE_0105

This document contains preliminary information on a new product under development. Details are subject to change without notice.

Previous Releases:

Important:

Further information is confidential and on request. Please contact Infineon Technologies AG in Munich, Germany, Security & Chip Card ICs, Tel +49 - 0 89 234-80000 Fax +49 - 0 89 234-81000 E-Mail:

Edition 2005

Published by Infineon Technologies AG, CC Applications Group St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG 2002 All Rights Reserved.

Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide see address list .

Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

SLE 66C321PE
16-Bit Security Controller with enhanced instruction set for large memories in 0.22µm CMOS Technology, 96-Kbyte ROM, 2304 Bytes RAM, 32-Kbyte EEPROM

Features New
• 8/16-bit microcomputer in µm CMOS technology
• Instruction set opcode compatible with standard

SAB 8051 processor
• Downward compatibility to existing SLE 66CxxxP
products for existing masks without using the
new features
• Internal Clock with up to 33 MHz Programmable internal frequency PLL x1, x2, x3, x4 and free running mode s .
• Adjustable frequency according to available power or required performance
• Increased internal clock frequency for maximum performance
• New

Addressable memory up to 16 Mbyte
• New

Additional enhanced instructions for direct
physical memory access of >64kByte
• Typically saves up to 90 % code space and
increases execution speed up to 80
• Internal frequency is automatically adjusted to guarantee a given limited power consumption
• Two 16-bit Autoreload Timer
• Power saving sleep mode
• Dedicated, non-standard architecture with execution time 6 times faster than standard SAB 8051
• Ext. Clock freq. 1 up to MHz for int. Clock up to 33 MHz
processor at same external clock. Up to 18 times faster using internal frequency PLL x 3 compared to
external clock .
• New
96 Kbytes User ROM for application programs
• 32 Kbytes MicroSlim-EEPROM
Ordering Information

Type SLE 66C321PE C SLE 66C321PE M5

Package1

Die sawn, unsawn M5.1

Voltage Range

Temperature Range

Frequency Range int. clock frequency

Frequency Range ext. clock frequency
25°C to + 70°C or
25°C to + 85°C

Up to 33 MHz
1 MHz - 5 MHz or
1 MHz - MHz
For ordering information please refer to the databook and contact your sales representative.
1 available as wire-bonded module M5 for embedding in plastic cards or as die C for customer packaging

Preliminary - Short Product Information 5 / 8

Pin Configuration

VCC GND

SLE 66C321PE

Figure 1 Pin Configuration

Pin Definitions and Functions

Symbol VCC RST CLK GND I/O

Function Operating voltage Reset input Processor clock input Ground Bi-directional data port

SLE 66C321PE

Preliminary - Short Product Information 6 / 8

SLE 66C321PE

The SLE66C321PE is one member of the improved 66PE-series of Infineon Technologies and the successor of the SLE66C322P. This high performance security controller is manufactured in advanced µm CMOS technology. It is downward compatible to existing 66P controller derivatives. The well known ECO2000 8/16 bit CPU provides the high efficiency of the SAB 8051 instruction set extended by additional powerful instructions together with enhanced performance, memory sizes and security features compared to existing 66P derivatives.

Performance The internal clock frequency can be adjusted to a level up to 33 MHz either as a multiple of 1,2,3,4 to the external frequency or independent of the clock rate of the terminal with the help of the internal clock. It is adjustable according to either available power requirements or required performance:
• Increased internal clock frequency for maximum performance, e.g. for high performance with max. frequency in payment applications.
• Automatically adjusted frequency for a max. given power consumption, e.g. by GSM or UMTS requirements. New Memory The SLE66C321PE offers 96 Kbytes of User-ROM, 256 byte internal RAM, 2048 byte XRAM and 32 Kbytes

MicroSlim-EEPROM, to fulfill the requirements of mainly standard GSM an SDA payment applications. The large ROM size allows to place applications in the ROM-mask and to keep the free for customer data. In addition it saves mask development costs, as one mask may be used for different customer projects. The enhanced Memory Management and Protection Unit allows a secure separation of the operating system and different applications. It allows to separate the memories in application orientated segments, which can be controlled by the OS. Furthermore, the MMU makes a secure downloading of applications possible even after personalization of a card. These new features suit the requirements of the next generation of multi application operating systems.

Voltage Clock Reset

XRAM EEPROM
96 Kbyte 2 Kbyte 32 Kbyte
16-Bit CPU with MMU &

ECO 2000 Instruction Set

Sleep Mode Logic Sensors/Filters

Voltage Regulator

Interrupt

Address-/Data Bus
two 16-bit Timer

Random Number Generator

UART

Clock generated

Figure 2 Block Diagram SLE 66C321PE The new platform is designed to address up to 16Mbyte. However this feature is only available upon request and will clearly require a change in the existing tool environment.

In addition, new instructions have been implemented in the design for an efficient direct access of physical memory >64KByte up to16 MByte.

Preliminary - Short Product Information 7 / 8

SLE 66C321PE

Security features Since the very beginning, security is an integrated part of Infineons product development, as proved by various certificates ITSEC, CC, Proton, VISA, ZKA, Mondex . The so called “integral security concept” for the 66P series ensures:
• A secret storage of any confidential code, data and keys
• Protection against side channel attacks such as Simple Power Analysis SPA , Differential Power Analysis DPA ,
• Protection against Differential Fault Analysis DFA , Electromagnetic Emanation Attack EMA and other possible

HW or SW attacks

Peripherals The CRC module allows the easy generation of checksums according to ISO/IEC 3309 16-Bit-CRC . To minimize the overall power consumption, the chip card controller IC offers a sleep mode. The UART supports the halfduplex transmission protocols T=0 and T=1 according to ISO/IEC All relevant transmission parameters can be adjusted by software, as e.g. the clock division factor, direct/inverse convention and the number of stop bits. Additionally, the I/O port can be driven by communication routines realized in software.

Symmetric algorithms can be processed in software.

The random number generator RNG is able to supply the CPU with true random numbers on all conditions. The advanced sensor concept includes various sensors for any kind of attack scenarios and even more important a “Life Test ” for sensors. The SLE 66C321PE fulfills all requirements of today's chip card applications, and is especially designed for mainstream GSM applications. In addition it belongs to a powerful platform for multi application cards and support the migration to enhanced GSM/WAP, OTA, GPRS and UMTS value added services.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SLE66C321PEMFC5.8 Datasheet file may be downloaded here without warranties.

Datasheet ID: SLE66C321PEMFC5.8 638609