SLE 4428 C

SLE 4428 C Datasheet


SLE 4418 / SLE 4428 Intelligent 8-Kbi t EEPROM

Part Datasheet
SLE 4428 C SLE 4428 C SLE 4428 C (pdf)
Related Parts Information
SLE 4428 M2.2 SLE 4428 M2.2 SLE 4428 M2.2
SLE 4418 M2.2 SLE 4418 M2.2 SLE 4418 M2.2
PDF Datasheet Preview
ICs for Chip Cards

SLE 4418 / SLE 4428 Intelligent 8-Kbi t EEPROM

Data Sheet

Published by Semiconductor Group Siemens Aktiengesellschaft
Ordering No. B116-H6447-G1-X-7600 Printed in Germany DA

Previous Releases:

Update

Data Classification

Maximum Ratings Maximum ratings are absolute ratings exceeding only one of these values may cause irreversible damage to the integrated circuit.

Characteristics The listed characteristics are ensured over the operating range of the integrated circuit. Typical characteristics specify mean values expected over the production spread. If not otherwise
specified, typical characteristics apply at TA = 25 °C and the given supply voltage.

Operating Range In the operating range the functions given in the circuit description are fulfilled. Important:

Important:

Further information is confidential and on request. Please contact Siemens Semiconductor Group in Munich, Germany, Marketing Chip Card ICs, Tel. 089-4144-2058 or 4144-4362

The supply of this component does not include a licence for its use in smart card applications. This licence is due to INNOVATRON Patents 137 Boulevard de Sébastopol, 75002 Paris, France, Fax 33 1 40 13 39 09

This edition was realized using the software system

Published by Siemens AG, Bereich Halbleiter, Marketing-Kommunikation, Balanstraße 73, D-81541 München.

Siemens AG All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies and Representatives worldwide see address list . Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Siemens Office, Semiconductor Group. Siemens AG is an approved CECC manufacturer. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred.

Intelligent 1-KByte EEPROM with Write Protect Function

Intelligent 1-KByte EEPROM with Write Protect Function and Programmable Security Code PSC

SLE 4418 SLE 4428
q 1024 x 8 bit EEPROM organization q Byte-wise addressing q Irreversible byte-wise write protection q 1024 x 1 bit protection memory organization q Serial three-wire bus q End of programming indicated on data output q Minimum of 104 write/erase cycles q Data retention for minimum of ten years q Contact configuration and serial interface in accordance to

ISO standard 7816 synchronous transmission

Additional Feature of SLE 4428
q Data can only be changed after entry of the correct 2-byte programmable security code PSC

M2.2

Type SLE 4418 C SLE 4418 M2.2 SLE 4428 C SLE 4428 M2.2
Ordering Code on request on request on request on request

Package Chip Wire-Bonded Module M2.2 Chip Wire-Bonded Module M2.2

Semiconductor Group

SLE 4418 SLE 4428

M2 Card Contacts

Pin Configurations top view

Pin Definitions and Functions

Card Contact Symbol

N.C.

N.C.

N.C.

Function Operating voltage 5 V Chip control Clock Not connected Ground Not connected Data line open drain Not connected

SLE 4418/4428 comes out as a M2.2 wire-bonded module for embedding in plastic cards or as a die for customer packaging.

Semiconductor Group

SLE 4418 SLE 4428

Figure 1 Block Diagram

Semiconductor Group

SLE 4418 SLE 4428
1 Functional Description

SLE 4418

The chip contains an EEPROM organized 1024 x 8 bit offering the possibility of programmable write protection for each byte. Reading of the whole memory is always possible. The memory can be written and erased byte by byte. Input data and the contents of the adressed byte are compared so that only bits are written which were not written before. Erasing is only possible byte-wise, even if only one bit is to be erased, but bits may be written individually. Each byte can be write/eraseprotected individually by setting a protect bit EEPROM ROM . The protect bit is only one time programmable and cannot be erased.

SLE 4428

Additionally to the above functions this version has a PSC verification logic. All the memory, except for the PSC, can always be read. The memory can be written or erased only after PSC verification. The error counter can always be written. After eight successive incorrect entries the error counter will block any subsequent attempt at PSC verification and hence any possibility to write and erase.
2 Reset and Answer-to-Reset

Reset

When the operating voltage is applied, the chip goes into the power-on reset POR state. POR is terminated by reset. Reset is started by RST changing from “0” to “1” and finished by CLK going from “0” to This reset operation aborts any currently active command. After POR a read operation must be performed before any change of data is possible.

Answer to Reset ISO 7816

Answer to reset sets the address counter to “0” and the first data bit appears on the output. The contents of the following addresses can be read out with the following clock pulses. Answer to reset is executed by the following steps Fig. 2 :

RST goes from “0” to “1”, clock pulse is applied, RST changes back from “1” to
3 Commands The state of RST defines the data direction on I/O.

RST 1 0

I/O Command entry Data output

Semiconductor Group

SLE 4418 SLE 4428

Figure 2 Reset and Answer-to-Reset

The possible commands are listed in table

Table 1 Control Words for Command Entry

Byte 1

Byte 2 Byte 3

Operation

S0 S1 S2 S3 S4 S5 A8 A9 A0-A7 D0-D7
More datasheets: DAME-11W1S-A197 | DCMMY8W8SA101 | DCE-ANT2458-ASSY | DCE-ANT2458-7X6X2 | DCE-ANT2458-MMCX | DCE-ANT2458-RMMCX | DCE-ANT2458-UFL | DCE-ANT2458-RTNC | DCE-ANT2458-MC | DCE-ANT2458-RSMA


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SLE4428C Datasheet file may be downloaded here without warranties.

Datasheet ID: SLE4428C 638606