SLE 66CL81P MCC8

SLE 66CL81P MCC8 Datasheet

SLE 66CL81P

Part	Datasheet
SLE 66CL81P MCC8	SLE 66CL81P MCC8 (pdf)

Related Parts	Information
SLE 66CL81P C	SLE 66CL81P C
SLE 66CL81P NB	SLE 66CL81P NB

PDF Datasheet Preview
Secure Mobile Solutions - Security SLE 66CL81P 16-Bit High Security Contactless Controller ISO/IEC 14443 Type A & B Compliant Interfaces For Contactless Operation with Memory Management and Protection Unit in µm CMOS Technology 72-Kbyte ROM, 2-Kbyte RAM, 8-Kbyte EEPROM 112-Bit / 192-Bit DDES-EC2 Accelerator supporting DES, 3DES and Elliptic Curve GF 2n Short Product Information April 2004 SLE 66CL81P Short Product Information Ref. SPI_SLE66CL81P_0404.doc This document contains preliminary information on a new product under development. Details are subject to change without notice. Previous Releases 2004-02-12 Type A baud rate of 106 kbit/s Important: Further information is confidential and on request. Please contact Infineon Technologies AG in Munich, Germany, Secure Mobile Solutions - Security Tel +49 - 0 89 234-80000 Fax +49 - 0 89 234-81000 E-Mail: Published by Infineon Technologies AG, SMS Security Applications Group St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG 2004 All Rights Reserved. To our valued customers We constantly strive to improve the quality of all our products and documentation. We have spent an exceptional amount of time to ensure that this document is correct. However, we realise that we may have missed a few things. If you find any information that is missing or appears in error, please use the contact section above to inform us. We appreciate your assistance in making this a better document. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. µµ SLE 66CL81P 16-Bit High Security Contactless Controller ISO/IEC 14443 Type A &B Compliant Interfaces For Contactless Operation with MMU in µm CMOS Technology 72-Kbyte ROM, 2304-byte RAM, 8-Kbyte EEPROM 112-Bit / 192-Bit DDES-EC2 Accelerator supporting DES, 3DES and Elliptic Curve GF 2n • Enhanced low power 8051 CPU with extended addressing modes for contactless smart card applications • Instruction set opcode compatible with standard 8051 processor with additional powerful instructions optimized for smart card application • Enhanced architecture with execution time 6 times faster 18 times using PLLmax than standard 8051 processor at same external clock • 70 Kbytes User ROM for operating system and application programs & data • 2 Kbytes reserved ROM for Resource Management System RMS_E with Contactless Optimized EEPROM write/erase routines • 8 Kbytes Secure EEPROM in SuperSlim technology for application program and data • 2048 bytes XRAM and 256 bytes internal RAM for fast data processing • Memory Management Unit • Certified True Random Number Generator • Dual Key Triple DES DDES & GF 2n Elliptic Curve EC2 Accelerator • CRC Module according to ISO/IEC 3309 supporting CCIT v.41 & HDLC X25 • 8 Interrupt Vectors Module with 3 priority Ordering Information1 Package SLE 66CL81P MCC8 MCC82 Temperature Range Frequency Range external clock 25°C to + 70°C Other packaging delivery such as NiAu bumps is available on request. 1 Ordering Codes are available on request 2 Pure Contactless Module Short Product Information 6 / 10 2004-04-01 µµ Pin Description SLE 66CL81P Figure 1 MCC8 Pin Configuration Wire-bonded Module top view SLE 66CL81P Figure 2 Pad Configuration die Table 3 Pin Definitions and Functions Card Contact Symbol LA LB Function Coil connection pin LA Coil connection pin LB Short Product Information 7 / 10 2004-04-01 µµ SLE 66CL81P The contactless only security controller SLE 66CL81P is a member of the Infineon Technologies SLE 66CxxxP high-end security controller family in µm CMOS technology which is designed for security systems that requires continuous ongoing improvements with the highest degree of protection against fraudulent attacks. SLE 66CL81P is targeting secure contactless applications such like electronic visa, national ID card, banking, security access, digital signature and transport. SLE 66CL81P offers 70 Kbytes of User-ROM, 256 bytes internal RAM, 2048 bytes XRAM and 8 Kbytes EEPROM, which can be used as data and as program memory. The non-volatile memory consists of high reliability cells to guarantee data integrity. This is especially important when the EEPROM is used as program memory. It features both ISO/IEC 14443 Type A and B contactless interfaces on a single chip. It also supports symmetric and asymmetric public-key algorithm such like DES and Elliptic Curve independently of the communication mode. Shield XRAM Non Volatile Memory ROM PROM EEPROM Reset Logic Sleep mode Logic Security Logic IRAM ECO 2000 CPU MED MMU Address-/Data BUS DDES -EC2 Interrupt module CRC TIMER 0 CURSE TIMER 1 RF Interface LA 256 Byte LB RAM Figure 2 Block Diagram of SLE 66CL81P The CPU provides the high efficiency of the 8051 instruction set extended by additional powerful instructions with enhanced performance, memory sizes and security features tailored for secure contactless applications. Using the embedded PLL, the internal clock is adjustable up to 15 MHz independent from the carrier frequency of the magnetic field supplied by the contactless terminal. The Memory Management Unit allows a secure separation of the operating system and the applications. Using the system/application mode, it allows to securely downloading applications in the field after personalisation. Using the MMU transparent mode allows keeping the memory mapping for code compatibility to SLE 66CxxS family. These new features suit the requirements of the new generation of operating systems.

PDF Datasheet Preview

Secure Mobile Solutions - Security

SLE 66CL81P
16-Bit High Security Contactless Controller ISO/IEC 14443 Type A & B Compliant Interfaces For Contactless Operation
with Memory Management and Protection Unit in µm CMOS Technology 72-Kbyte ROM, 2-Kbyte RAM, 8-Kbyte EEPROM 112-Bit / 192-Bit DDES-EC2 Accelerator supporting DES, 3DES and Elliptic Curve GF 2n

Short Product Information

April 2004

SLE 66CL81P Short Product Information

Ref. SPI_SLE66CL81P_0404.doc

This document contains preliminary information on a new product under development. Details are subject to change without notice.

Previous Releases 2004-02-12

Type A baud rate of 106 kbit/s

Important:

Further information is confidential and on request. Please contact Infineon Technologies AG in Munich, Germany, Secure Mobile Solutions - Security Tel +49 - 0 89 234-80000 Fax +49 - 0 89 234-81000 E-Mail:

Published by Infineon Technologies AG, SMS Security Applications Group St.-Martin-Strasse 53, D-81541 München Infineon Technologies AG 2004 All Rights Reserved.

To our valued customers We constantly strive to improve the quality of all our products and documentation. We have spent an exceptional amount of time to ensure that this document is correct. However, we realise that we may have missed a few things. If you find any information that is missing or appears in error, please use the contact section above to inform us. We appreciate your assistance in making this a better document.

Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide see address list .

Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
µµ SLE 66CL81P
16-Bit High Security Contactless Controller ISO/IEC 14443 Type A &B Compliant Interfaces For Contactless Operation with MMU in µm CMOS Technology 72-Kbyte ROM, 2304-byte RAM, 8-Kbyte EEPROM 112-Bit / 192-Bit DDES-EC2 Accelerator supporting DES, 3DES and Elliptic Curve GF 2n
• Enhanced low power 8051 CPU with
extended addressing modes for contactless smart card applications
• Instruction set opcode compatible with
standard 8051 processor with additional powerful instructions optimized for smart card application
• Enhanced architecture with execution
time 6 times faster 18 times using PLLmax than standard 8051 processor at same external clock
• 70 Kbytes User ROM for operating system
and application programs & data
• 2 Kbytes reserved ROM for Resource

Management System RMS_E with Contactless Optimized EEPROM write/erase routines
• 8 Kbytes Secure EEPROM in SuperSlim
technology for application program and data
• 2048 bytes XRAM and 256 bytes internal

RAM for fast data processing
• Memory Management Unit
• Certified True Random Number

Generator
• Dual Key Triple DES DDES &

GF 2n Elliptic Curve EC2 Accelerator
• CRC Module according to ISO/IEC 3309
supporting CCIT v.41 & HDLC X25
• 8 Interrupt Vectors Module with 3 priority
Ordering Information1 Package

SLE 66CL81P MCC8

MCC82

Temperature Range Frequency Range
external clock
25°C to + 70°C

Other packaging delivery such as NiAu bumps is available on request.
1 Ordering Codes are available on request 2 Pure Contactless Module

Short Product Information
6 / 10
2004-04-01
µµ

Pin Description

SLE 66CL81P

Figure 1 MCC8 Pin Configuration Wire-bonded Module top view

SLE 66CL81P

Figure 2 Pad Configuration die

Table 3 Pin Definitions and Functions

Card Contact

Symbol LA LB

Function Coil connection pin LA Coil connection pin LB

Short Product Information
7 / 10
2004-04-01
µµ SLE 66CL81P

The contactless only security controller SLE 66CL81P is a member of the Infineon Technologies SLE 66CxxxP high-end security controller family in µm CMOS technology which is designed for security systems that requires continuous ongoing improvements with the highest degree of protection against fraudulent attacks.

SLE 66CL81P is targeting secure contactless applications such like electronic visa, national ID card, banking, security access, digital signature and transport.

SLE 66CL81P offers 70 Kbytes of User-ROM, 256 bytes internal RAM, 2048 bytes XRAM and 8 Kbytes EEPROM, which can be used as data and as program memory. The non-volatile memory consists of high reliability cells to guarantee data integrity. This is especially important when the EEPROM is used as program memory.

It features both ISO/IEC 14443 Type A and B contactless interfaces on a single chip. It also supports symmetric and asymmetric public-key algorithm such like DES and Elliptic Curve independently of the communication mode.

Shield

XRAM

Non Volatile Memory ROM PROM EEPROM

Reset Logic

Sleep mode Logic

Security Logic

IRAM

ECO 2000 CPU

MED MMU

Address-/Data BUS

DDES -EC2

Interrupt module

CRC TIMER 0 CURSE

TIMER 1

RF Interface LA
256 Byte LB RAM

Figure 2 Block Diagram of SLE 66CL81P

The CPU provides the high efficiency of the 8051 instruction set extended by additional powerful instructions with enhanced performance, memory sizes and security features tailored for secure contactless applications. Using the embedded PLL, the internal clock is adjustable up to 15 MHz independent from the carrier frequency of the magnetic field supplied by the contactless terminal.

The Memory Management Unit allows a secure separation of the operating system and the applications. Using the system/application mode, it allows to securely downloading applications in the field after personalisation. Using the MMU transparent mode allows keeping the memory mapping for code compatibility to SLE 66CxxS family. These new features suit the requirements of the new generation of operating systems.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SLE66CL81PMCC8 Datasheet file may be downloaded here without warranties.

Datasheet ID: SLE66CL81PMCC8 638597