SLE5542M32XHSA2

SLE5542M32XHSA2 Datasheet

SLE 5542

Part	Datasheet
SLE5542M32XHSA2	SLE5542M32XHSA2 (pdf)

PDF Datasheet Preview
Chip Card & Security ICs SLE 5542 Intelligent 256-Byte EEPROM with Write Protection function and Programmable Security Code Short Product Information May 2006 SLE 5542 Short Product Information Previous Releases 2005-06-16 Editorial changes Ref. SPI_SLE5542_0506.doc Important: Further information is confidential and on request. Please contact Infineon Technologies AG in Munich, Germany, Chip Card & Security ICs, Tel +49 0 89 / 234-80000 Fax +49 0 89 / 234-81000 E-Mail: Published by Infineon Technologies AG, AIM CC Applications Group D-81726 München Infineon Technologies AG 2006 All Rights Reserved. To our valued customers We constantly strive to improve the quality of all our products and documentation. We have spent an exceptional amount of time to ensure that this document is correct. However, we realise that we may have missed a few things. If you find any information that is missing or appears in error, please use the contact section above to inform us. We appreciate your assistance in making this a better document. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Intelligent 256-Byte EEPROM with Write Protection Function and Programmable Security Code PSC SLE 5542 • 100% functional compatibility to SLE 4442 • 256 x 8 bit EEPROM organization of Data Memory • 32 x 1 bit Protection Memory Byte-wise write protection of first 32 addresses byte of Data Memory Manufacturer Code for unique identification of application • Data Memory addresses alterable only after verification of 3-Byte Programmable Security Code PSC • Two-wire link protocol Byte-wise addressing End of processing indicated at data output • Contact configuration and Answer-to-Reset synchronous transmission in accordance to standard ISO/IEC 7816 • Sophisticated electrical characteristics Ambient temperature +80°C for chip, +80°C for module Supply voltage 5 V ± 10 % Supply current < 3 mA typical 600 µA EEPROM erase / write time 5 ms ESD protection typical 4,000 V EEPROM Endurance minimum 100,000 erase / write cycles1 Data retention for minimum of 10 years1 • Advanced µm CMOS-technology optimised for security layout EEPROM-cells protected by shield Shielding of deeper layers via metal Sensory and logical security functions No isolation on backside necessary 1 Values are temperature dependent. Short Product Information 2006-05-19 Ordering and Packaging information Table 1 Ordering Information Type Package1 SLE 5542 C Die on Wafer SLE 5542 D Die on Wafer SLE 5542 M3 T-M3.2-6 SLE 5542 MFC3 S-MFC3.1-6-1 Remark unsawn sawn FCoS Pin Description SLE 5542 Ordering Code on request on request on request on request Figure 1 Pin Configuration Wire-bonded Module M3.2 top view Figure 2 Pin Configuration Module Flip Chip MFC3.1 top view 1 Available as a Module Flip Chip MFC3 , wire-bonded module M3 for embedding in plastic cards or as a die on unsawn C / sawn wafer D for customer packaging Short Product Information 2006-05-19 SLE 5542 VCC RST CLK SLE 5542 GND I/O Figure 3 Pad Configuration Die Table 2 Pin Definitions and Functions Card Contact C1 C2 C3 C5 C6 C7 Symbol VCC RST CLK GND N.C. I/O Function Supply voltage Control input Reset Signal Clock input Ground Not connected Bi-directional data line open drain Short Product Information 2006-05-19 SLE 5542 Circuit Description Memory Organization The memory is organized in a Data Memory of 256 byte. Write Protection of Data Memory Each of the first 32 bytes of the Data Memory can be irreversibly protected against data change by writing the corresponding bit in the Protection Memory 32 bit . Dependent on the state of the protection bit the Data Memory is read only ROM or may be erased and written again EEPROM . Change of the manufacturer code Application ID and Chip Coding is only possible by the chip manufacturer. Programmable Security Code Change of data of the Data Memory and write a bit of the Protection Memory is only possible after verification of the 3-Byte Programmable Security Code PSC . Figure 4 Memory Overview SLE 5542 Short Product Information 2006-05-19

PDF Datasheet Preview

Chip Card & Security ICs

SLE 5542

Intelligent 256-Byte EEPROM with Write Protection function and Programmable Security Code

Short Product Information

May 2006

SLE 5542 Short Product Information

Previous Releases 2005-06-16

Editorial changes

Ref. SPI_SLE5542_0506.doc

Important:

Further information is confidential and on request. Please contact Infineon Technologies AG in Munich, Germany, Chip Card & Security ICs, Tel +49 0 89 / 234-80000 Fax +49 0 89 / 234-81000 E-Mail:

Published by Infineon Technologies AG, AIM CC Applications Group D-81726 München Infineon Technologies AG 2006 All Rights Reserved.

To our valued customers We constantly strive to improve the quality of all our products and documentation. We have spent an exceptional amount of time to ensure that this document is correct. However, we realise that we may have missed a few things. If you find any information that is missing or appears in error, please use the contact section above to inform us. We appreciate your assistance in making this a better document.

Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer.

Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives world-wide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Intelligent 256-Byte EEPROM with Write Protection Function and Programmable Security Code PSC

SLE 5542
• 100% functional compatibility to SLE 4442
• 256 x 8 bit EEPROM organization of Data Memory
• 32 x 1 bit Protection Memory Byte-wise write protection of first 32 addresses byte of Data Memory Manufacturer Code for unique identification of application
• Data Memory addresses alterable only after verification of 3-Byte Programmable Security Code PSC
• Two-wire link protocol Byte-wise addressing End of processing indicated at data output
• Contact configuration and Answer-to-Reset synchronous transmission in accordance to standard ISO/IEC 7816
• Sophisticated electrical characteristics Ambient temperature +80°C for chip, +80°C for module

Supply voltage 5 V ± 10 % Supply current < 3 mA typical 600 µA EEPROM erase / write time 5 ms ESD protection typical 4,000 V EEPROM Endurance minimum 100,000 erase / write cycles1 Data retention for minimum of 10 years1
• Advanced µm CMOS-technology optimised for security layout EEPROM-cells protected by shield Shielding of deeper layers via metal Sensory and logical security functions No isolation on backside necessary
1 Values are temperature dependent.

Short Product Information
2006-05-19
Ordering and Packaging information
Table 1 Ordering Information

Type

Package1

SLE 5542 C

Die on Wafer

SLE 5542 D

Die on Wafer

SLE 5542 M3

T-M3.2-6

SLE 5542 MFC3

S-MFC3.1-6-1

Remark unsawn sawn

FCoS

Pin Description

SLE 5542
Ordering Code on request on request on request on request

Figure 1 Pin Configuration Wire-bonded Module M3.2 top view

Figure 2 Pin Configuration Module Flip Chip MFC3.1 top view
1 Available as a Module Flip Chip MFC3 , wire-bonded module M3 for embedding in plastic cards or as a die on unsawn C / sawn wafer D for customer packaging

Short Product Information
2006-05-19

SLE 5542

VCC RST CLK

SLE 5542

GND I/O

Figure 3 Pad Configuration Die

Table 2 Pin Definitions and Functions

Card Contact C1 C2 C3 C5 C6 C7

Symbol VCC RST CLK GND N.C. I/O

Function Supply voltage Control input Reset Signal Clock input Ground Not connected Bi-directional data line open drain

Short Product Information
2006-05-19

SLE 5542

Circuit Description

Memory Organization The memory is organized in a Data Memory of 256 byte.

Write Protection of Data Memory Each of the first 32 bytes of the Data Memory can be irreversibly protected against data change by writing the corresponding bit in the Protection Memory 32 bit . Dependent on the state of the protection bit the Data Memory is read only ROM or may be erased and written again EEPROM . Change of the manufacturer code Application ID and Chip Coding is only possible by the chip manufacturer.

Programmable Security Code Change of data of the Data Memory and write a bit of the Protection Memory is only possible after verification of the 3-Byte Programmable Security Code PSC .

Figure 4 Memory Overview SLE 5542

Short Product Information
2006-05-19

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SLE5542M32XHSA2 Datasheet file may be downloaded here without warranties.

Datasheet ID: SLE5542M32XHSA2 638595