PSB 21493 H V1.7

PSB 21493 H V1.7 Datasheet

The INCA-P, PSB 21493, integrates in a single clip, all the functions required for a high feature PBX phone.

Part	Datasheet
PSB 21493 H V1.7	PSB 21493 H V1.7 (pdf)

Related Parts	Information
PSB 21493 F V1.7	PSB 21493 F V1.7

PDF Datasheet Preview
The INCA-P, PSB 21493, integrates in a single clip, all the functions required for a high feature PBX phone. The line transceiver of the INCA-P implements the subscriber access functions for a digital PBX terminal to be connected to a two-wire UPN Interface. The chip provides complete Layer-1 and basic Layer-2 functions for digital terminals. Different interfaces allow connection to a variety of devices including a full-speed USB interface for PC host communications. The INCA-P is typically used in applications for terminal equipment in which the microphone, loudspeaker, headset, and handset can be directly connected to the Analog Front End AFE . The AFE and the integrated fixpoint DSP perform signal processing tasks such as encoding, decoding, filtering functions, and tone generation ringing, audible feedback tones, and DTMF signal . A full-duplex echo cancellation mechanism provides high quality speakerphone functionality. PBX Feature Phone with full-duplex, hands-free operation, including USB interface Two-wire transceiver with AMI coded 2B+D channels C166 based 16-bit CPU Bootstrap Loader Function On-Chip General Purpose SRAM 4 KBytes On-Chip Debug System OCDS Level 1 Both Power-on-Reset and Under Voltage Detection provided Terminal-specific Functions, including Keypad Scanner, LED Matrix Control, and two Pulse Width Modulation units 12 Mbit/s Full-Speed Mode com- plies with USB Specification V1.1 15 SW-configurable Endpoints, as well as the bi-directional Control Endpoint 0 Full-duplex echo cancellation with noise reduction Two transducer correction filters I N C A - P ToneGenerator DTMF Receiver Three differential inputs for the handset microphone, speakerphone, and the headset Three differential outputs for a handset ear piece 200 a headset 200 a loudspeaker 100 mW 20 PCM A-Law/µ-Law ITU-T G.711 and 8/16-bit linear data PCM Codec is fully compatible with the ITU-T G.712 and ETSI NET33 specification Type INCA-P Sales Code PSB 21493 Package P-TQFP-144 INCA-P Infineon Codec with UPNTransceiver and Embedded Microcontroller featuring Acoustic Echo Cancellation PSB 21493 Never stop Ordering No. B115-H7882-X-X-7600 Printed in Germany

PDF Datasheet Preview

The INCA-P, PSB 21493, integrates in a single clip, all the functions required for a high feature PBX phone.

The line transceiver of the INCA-P implements the subscriber access functions for a digital PBX terminal to be connected to a two-wire UPN Interface. The chip provides complete Layer-1 and basic Layer-2 functions for digital terminals.

Different interfaces allow connection to a variety of devices including a full-speed USB interface for PC host communications.

The INCA-P is typically used in applications for terminal equipment in which the microphone, loudspeaker, headset, and handset can be directly connected to the Analog Front End AFE .

The AFE and the integrated fixpoint DSP perform signal processing tasks such as encoding, decoding, filtering functions, and tone generation ringing, audible feedback tones, and DTMF signal . A full-duplex echo cancellation mechanism provides high quality speakerphone functionality.

PBX Feature Phone with
full-duplex, hands-free operation, including USB interface

Two-wire transceiver with AMI
coded 2B+D channels

C166 based 16-bit CPU Bootstrap Loader Function On-Chip General Purpose

SRAM 4 KBytes

On-Chip Debug System

OCDS Level 1

Both Power-on-Reset and Under

Voltage Detection provided

Terminal-specific Functions,
including Keypad Scanner, LED Matrix Control, and two Pulse Width Modulation units
12 Mbit/s Full-Speed Mode com-
plies with USB Specification V1.1
15 SW-configurable Endpoints,
as well as the bi-directional Control Endpoint 0

Full-duplex echo cancellation
with noise reduction

Two transducer correction filters

I N C A - P ToneGenerator

DTMF Receiver

Three differential inputs for the
handset microphone, speakerphone, and the headset

Three differential outputs for a handset ear piece 200 a headset 200 a loudspeaker 100 mW 20

PCM A-Law/µ-Law

ITU-T G.711 and 8/16-bit linear data

PCM Codec is fully compatible
with the ITU-T G.712 and ETSI NET33 specification

Type INCA-P

Sales Code PSB 21493

Package P-TQFP-144

INCA-P

Infineon Codec with UPNTransceiver and Embedded Microcontroller featuring

Acoustic Echo Cancellation

PSB 21493

Never stop
Ordering No. B115-H7882-X-X-7600

Printed in Germany

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PSB21493HV1.7 Datasheet file may be downloaded here without warranties.

Datasheet ID: PSB21493HV1.7 638480