IRAMS10UP60B-3

IRAMS10UP60B-3 Datasheet

IRAMS10UP60B

Part	Datasheet
IRAMS10UP60B-3	IRAMS10UP60B-3 (pdf)

Related Parts	Information
IRAMS10UP60B-2	IRAMS10UP60B-2
IRAMS10UP60B-4	IRAMS10UP60B-4
IRAMS10UP60B	IRAMS10UP60B

PDF Datasheet Preview
IRAMS10UP60B Series Integrated Power Hybrid IC for 10A, 600V Appliance Motor Drive Applications. with Internal Shunt Resistor International Rectifier's IRAMS10UP60B is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. An internal shunt is also included and offers easy current feedback and overcurrent monitor for precise and safe operation. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages. • Internal Shunt Resistor • Integrated Gate Drivers and Bootstrap Diodes • Temperature Monitor • Fully Isolated Package • Low VCE on Non Punch Through IGBT Technology • Undervoltage lockout for all channels • Matched propagation delay for all channels • Schmitt-triggered input logic • Cross-conduction prevention logic • Lower di/dt gate driver for better noise immunity • Motor Power range 0.4~0.75kW / 85~253 Vac • Isolation 2000VRMS /1min and CTI > 600V • Recognized by UL E252584 , RoHS Compliant Absolute Maximum Ratings Parameter Value Units VCES / VRRM V+ IGBT/Diode Blocking Voltage Positive Bus Input Voltage 600 V IO TC=25°C IO TC=100°C IO FPWM PD VISO TJ IGBT & Diodes TJ Driver IC RMS Phase Current Note 1 RMS Phase Current Note 1 Pulsed RMS Phase Current Note 2 PWM Carrier Frequency Power dissipation per IGBT TC =25°C Isolation Voltage 1min Operating Junction temperature Range Operating Junction temperature Range 2000 VRMS -40 to +150 °C -40 to +150 Mounting torque Range M3 screw Note 1 Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=20kHz, Modulation Depth=0.8, PF=0.6, See Figure Note 2 tP<100ms TC=25°C FPWM=20kHz. Limited by IBUS-ITRIP, see Table "Inverter Section Electrical Characteristics" IRAMS10UP60B Internal Electrical Schematic - IRAMS10UP60B V+ 10 V- 12 VB1 7 U, VS1 8 VB2 4 V, VS2 5 VB3 1 W, VS3 2 HIN1 15 HIN2 16 HIN3 17 LIN1 18 LIN2 19 LIN3 20 FLT-EN 21 ITRIP 22 VTH 13 VCC 14 VSS 23 23 VS1 24 HO1 22 21 20 19 18 17 VB2 HO2 VS2 VB3 HO3 VS3 LO1 16 25 VB1 1 VCC 2 HIN1 Driver IC LO2 15 3 HIN2

PDF Datasheet Preview

IRAMS10UP60B

Series

Integrated Power Hybrid IC for
10A, 600V

Appliance Motor Drive Applications.
with Internal Shunt Resistor

International Rectifier's IRAMS10UP60B is an Integrated Power Module developed and optimized for electronic motor control in appliance applications such as washing machines and refrigerators. Plug N Drive technology offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. An internal shunt is also included and offers easy current feedback and overcurrent monitor for precise and safe operation. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the
module and deliver further cost reduction advantages.
• Internal Shunt Resistor
• Integrated Gate Drivers and Bootstrap Diodes
• Temperature Monitor
• Fully Isolated Package
• Low VCE on Non Punch Through IGBT Technology
• Undervoltage lockout for all channels
• Matched propagation delay for all channels
• Schmitt-triggered input logic
• Cross-conduction prevention logic
• Lower di/dt gate driver for better noise
immunity
• Motor Power range 0.4~0.75kW / 85~253 Vac
• Isolation 2000VRMS /1min and CTI > 600V
• Recognized by UL E252584 , RoHS Compliant

Absolute Maximum Ratings

Parameter

Value

Units

VCES / VRRM V+

IGBT/Diode Blocking Voltage Positive Bus Input Voltage
600 V

IO TC=25°C IO TC=100°C IO FPWM PD VISO TJ IGBT & Diodes TJ Driver IC

RMS Phase Current Note 1 RMS Phase Current Note 1 Pulsed RMS Phase Current Note 2 PWM Carrier Frequency Power dissipation per IGBT TC =25°C Isolation Voltage 1min Operating Junction temperature Range Operating Junction temperature Range
2000

VRMS
-40 to +150 °C
-40 to +150

Mounting torque Range M3 screw

Note 1 Sinusoidal Modulation at V+=400V, TJ=150°C, FPWM=20kHz, Modulation Depth=0.8, PF=0.6, See Figure Note 2 tP<100ms TC=25°C FPWM=20kHz. Limited by IBUS-ITRIP, see Table "Inverter Section Electrical Characteristics"

IRAMS10UP60B

Internal Electrical Schematic - IRAMS10UP60B

V+ 10

V- 12

VB1 7 U, VS1 8

VB2 4 V, VS2 5

VB3 1 W, VS3 2

HIN1 15 HIN2 16 HIN3 17 LIN1 18 LIN2 19 LIN3 20 FLT-EN 21 ITRIP 22

VTH 13 VCC 14 VSS 23
23 VS1 24 HO1
22 21 20 19 18 17 VB2 HO2 VS2 VB3 HO3 VS3

LO1 16
25 VB1 1 VCC 2 HIN1

Driver IC

LO2 15
3 HIN2

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRAMS10UP60B-3 Datasheet file may be downloaded here without warranties.

Datasheet ID: IRAMS10UP60B-3 638314