BTS6510B

BTS6510B Datasheet

Data Sheet BTS6510

Part	Datasheet
BTS6510B	BTS6510B (pdf)

PDF Datasheet Preview
Data Sheet BTS6510 Smart Highside High Current Power Switch power MOSFET • Overload protection • Current limitation • Short circuit protection • Overtemperature protection • Overvoltage protection including load dump • Clamp of negative voltage at output • Fast deenergizing of inductive loads 1 • Low ohmic inverse current operation • Diagnostic feedback with load current sense • Open load detection via current sense • Loss of Vbb protection2 • Electrostatic discharge ESD protection Product Summary Operating voltage On-state resistance Noinal current Load current ISO Short circuit current limitation Current sense ratio Vbb on RON IL nom IL ISO IL SC IL IIS 17 A 70 A 130 A 14 000 TO 220-7 Application • Power switch with current sense diagnostic feedback for 12 V and 24 V DC grounded loads • Most suitable for loads with high inrush current like lamps and motors all types of resistive and inductive loads • Replaces electromechanical relays, fuses and discrete circuits N channel vertical power FET with charge pump, current controlled input and diagnostic feedback with load current sense, integrated in Smart chip on chip technology. Providing embedded protective functions. Voltage source Voltage sensor Logic VIN VIS Logic GND Overvoltage Current Gate protection limit protection Charge pump Level shifter Rectifier Limit for unclamped ind. loads Output Voltage detection Current Sense 4 & Tab + Vbb OUT 1,2,6,7 Load Temperature sensor Load GND 1 With additional external diode. 2 Additional external diode required for energized inductive loads see page Infineon Technologies AG Page 1of 15 2003-Oct-01 Pin 1 2 3 4 Data Sheet BTS6510 Symbol OUT IN Vbb Package and Ordering Code All dimensions in mm SMD TO 220-7, BTS 6510 B T&R: Ordering code Q67060-S6311 Footprint: Data Sheet BTS6510 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Infineon Technologies AG Page 15 of 15 2003-Oct-01

PDF Datasheet Preview

Data Sheet BTS6510

Smart Highside High Current Power Switch
power MOSFET
• Overload protection
• Current limitation
• Short circuit protection
• Overtemperature protection
• Overvoltage protection including load dump
• Clamp of negative voltage at output
• Fast deenergizing of inductive loads 1
• Low ohmic inverse current operation
• Diagnostic feedback with load current sense
• Open load detection via current sense
• Loss of Vbb protection2
• Electrostatic discharge ESD protection

Product Summary Operating voltage On-state resistance Noinal current Load current ISO Short circuit current limitation Current sense ratio

Vbb on RON IL nom IL ISO IL SC IL IIS
17 A 70 A 130 A 14 000

TO 220-7

Application
• Power switch with current sense diagnostic
feedback for 12 V and 24 V DC grounded loads
• Most suitable for loads with high inrush current
like lamps and motors all types of resistive and inductive loads
• Replaces electromechanical relays, fuses and discrete circuits

N channel vertical power FET with charge pump, current controlled input and diagnostic feedback with load current sense, integrated in Smart chip on chip technology. Providing embedded protective functions.

Voltage source

Voltage sensor

Logic

VIN VIS

Logic GND

Overvoltage Current

Gate
protection
limit
protection

Charge pump Level shifter

Rectifier

Limit for unclamped ind. loads

Output Voltage detection

Current Sense
4 & Tab
+ Vbb

OUT 1,2,6,7

Load

Temperature sensor

Load GND
1 With additional external diode. 2 Additional external diode required for energized inductive loads see page

Infineon Technologies AG

Page 1of 15
2003-Oct-01

Pin 1 2 3 4

Data Sheet BTS6510

Symbol OUT IN Vbb
Package and Ordering Code

All dimensions in mm

SMD TO 220-7,

BTS 6510 B T&R:
Ordering code Q67060-S6311

Footprint:

Data Sheet BTS6510

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

Infineon Technologies AG

Page 15 of 15
2003-Oct-01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS6510B Datasheet file may be downloaded here without warranties.

Datasheet ID: BTS6510B 637946