BTS426L1 E3062A

BTS426L1 E3062A Datasheet

BTS426L1

Part	Datasheet
BTS426L1 E3062A	BTS426L1 E3062A (pdf)

Related Parts	Information
BTS426L1	BTS426L1
BTS426L1 E3043	BTS426L1 E3043

PDF Datasheet Preview
Smart Highside Power Switch • Overload protection • Current limitation • Short circuit protection • Thermal shutdown • Overvoltage protection including load dump • Fast demagnetization of inductive loads and hysteresis • Open drain diagnostic output • Open load detection in ON-state • CMOS compatible input • Loss of ground and loss of Vbb protection • Electrostatic discharge ESD protection BTS426L1 Product Summary Overvoltage protection Operating voltage On-state resistance Load current ISO Current limitation Vbb AZ Vbb on RON IL ISO IL SCr 43 V 34 V 60 A 16 A TO-220AB/5 5 Standard 1 Straight leads Application • µC compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads • All types of resistive, inductive and capacitve loads • Replaces electromechanical relays, fuses and discrete circuits N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart technology. Providing embedded protective functions. Voltage source V Logic Voltage sensor Logic Overvoltage protection Current limit Gate protection + Vbb 3 Charge pump Level shifter Rectifier Limit for unclamped ind. loads Open load Short to Vbb detection Signal GND Temperature sensor Load RO GND Load GND Semiconductor Group 1 of 14 2003-Oct-01 BTS426L1 Function - Logic ground I Input, activates the power switch in case of logical high signal + Positive power supply voltage, the tab is shorted to this pin S Diagnostic feedback, low on failure Package and Ordering Code All dimensions in mm Standard TO-220AB/5 Ordering code BTS426L1 Q67060-S6108-A2 BTS426L1 SMD TO-220AB/5, Opt. E3062 Ordering code BTS426L1 E3062A T&R: Q67060-S6108-A4 TO-220AB/5, Option E3043 BTS426L1 E3043 Ordering code Q67060-S6108-A3 Changed since Date Change Dec td ST OL4 max reduced from 1500 1996 to 800µs, typical from 400 to 320µs, min limit unchanged EAS maximum rating and diagram added Zth specification added Semiconductor Group 2003-Oct-01 Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list . Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BTS426L1 Semiconductor Group 2003-Oct-01

PDF Datasheet Preview

Smart Highside Power Switch
• Overload protection
• Current limitation
• Short circuit protection
• Thermal shutdown
• Overvoltage protection including load dump
• Fast demagnetization of inductive loads
and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge ESD protection

BTS426L1

Product Summary Overvoltage protection Operating voltage On-state resistance Load current ISO Current limitation

Vbb AZ Vbb on RON IL ISO IL SCr
43 V 34 V
60 A 16 A

TO-220AB/5
5 Standard
1 Straight leads

Application
• µC compatible power switch with diagnostic feedback for 12 V and 24 V DC grounded loads
• All types of resistive, inductive and capacitve loads
• Replaces electromechanical relays, fuses and discrete circuits

N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart technology. Providing embedded protective functions.

Voltage source

V Logic Voltage sensor

Logic

Overvoltage protection

Current limit

Gate protection
+ Vbb 3

Charge pump Level shifter

Rectifier

Limit for unclamped ind. loads

Open load Short to Vbb
detection

Signal GND

Temperature sensor

Load

RO GND

Load GND

Semiconductor Group
1 of 14
2003-Oct-01

BTS426L1

Function
- Logic ground

I Input, activates the power switch in case of logical high signal
+ Positive power supply voltage,
the tab is shorted to this pin

S Diagnostic feedback, low on failure
Package and Ordering Code

All dimensions in mm

Standard TO-220AB/5
Ordering code

BTS426L1

Q67060-S6108-A2

BTS426L1
SMD TO-220AB/5, Opt. E3062 Ordering code

BTS426L1 E3062A T&R:

Q67060-S6108-A4

TO-220AB/5, Option E3043

BTS426L1 E3043
Ordering code Q67060-S6108-A3

Changed since Date Change

Dec td ST OL4 max reduced from 1500 1996 to 800µs, typical from 400 to
320µs, min limit unchanged

EAS maximum rating and diagram added

Zth specification added

Semiconductor Group
2003-Oct-01

Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 München Infineon Technologies AG 2001 All Rights Reserved.

Attention please!

The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information

For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide see address list .

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.

BTS426L1

Semiconductor Group
2003-Oct-01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BTS426L1E3062A Datasheet file may be downloaded here without warranties.

Datasheet ID: BTS426L1E3062A 637903