BGF 200 E6327
BGF 200 E6327 Datasheet
BGF200
| Part | Datasheet |
|---|---|
BGF 200 E6327 |
BGF 200 E6327 (pdf) |
| PDF Datasheet Preview |
|---|
| BGF200 Mircophone Filter and ESD Protection Evaluation Kit RF & Protection Devices Edition 2007-02-21 Published by Infineon Technologies AG 81726 München, Germany Infineon Technologies AG All Rights Reserved. LEGAL DISCLAIMER THE INFORMATION GIVEN IN THIS APPLICATION NOTE IS GIVEN AS A HINT FOR THE IMPLEMENTATION OF THE INFINEON TECHNOLOGIES COMPONENT ONLY AND SHALL NOT BE REGARDED AS ANY DESCRIPTION OR WARRANTY OF A CERTAIN FUNCTIONALITY, CONDITION OR QUALITY OF THE INFINEON TECHNOLOGIES COMPONENT. THE RECIPIENT OF THIS APPLICATION NOTE MUST VERIFY ANY FUNCTION DESCRIBED HEREIN IN THE REAL APPLICATION. INFINEON TECHNOLOGIES HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND INCLUDING WITHOUT LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF ANY THIRD PARTY WITH RESPECT TO ANY AND ALL INFORMATION GIVEN IN THIS APPLICATION NOTE. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Mircophone Filter and ESD Protection Evaluation Kit Titel change BGF200 Evaluation Kit Evaluation Kit Description BGF200 Evaluation Kit BGF200 Microphone Filter and ESD Protection Evaluation Kit BGF200 Microphone Filter and ESD Protection Evaluation Kit The BGF200 is a microphone filter with low pass characteristic offering a very high stop band attenuation up to 6 GHz. All pins are protected against ESD. The wafer level package is a green package with a size of only mm x mm and a total height of mm. Figure 1 Schematic B3 , GN D 1 C2 1n0 B2, GND2 150p C1 1n0 R2 2 k2 C2, GND3 C4 1n0 R4 2 k2 BG F 200_S c hemati c .v s d The evaluation kit for the BGF200 microphone filter IC consists of two printed circuit boards: • DC board • RF board DC Board Figure 2 DC evaluation board Evaluation Kit Description Bgf200_dc.vsd BGF200 Evaluation Kit BGF200 Microphone Filter and ESD Protection Evaluation Kit Figure 2 shows the DC evaluation board used in this evaluation kit. This PCB was designed to be mounted with two BGF200. On the left hand side the HiPAC IC is soldered to the board while the right hand side of the board was left open to show the footprint required for BGF200. The size of the board is 15 mm by 38 mm. The pitch size of the pads is mm. This board was designed to perform pin-to-pin DC tests, like measuring the values of the integrated resistors, as well as checking the ESD performance of the IC. It can also be used for qualification purposes. RF Board Figure 3 Bare RF Board |
| More datasheets: 1N6081US | 1N6075US | 1N6077US | 1N6076US | 1N6074US | 1N6073US | M5282LITEKIT | DBMC-21C1P-J-K87 | DDMV24W7SNA197 | DDM24W7PA190K87 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BGF200E6327 Datasheet file may be downloaded here without warranties.