BGF119E6329XTSA1
BGF119E6329XTSA1 Datasheet
BGF119
| Part | Datasheet |
|---|---|
BGF119E6329XTSA1 |
BGF119E6329XTSA1 (pdf) |
| PDF Datasheet Preview |
|---|
| Data Sheet, V3.0, November 2008 BGF119 Transient Voltage Suppressor Small Signal Discretes Edition 2008-11-18 Published by Infineon Technologies AG 81726 München, Germany Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics “Beschaffenheitsgarantie” . With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGF119 Previous Version 2008-10-20, V2.0 Updated Figure 3 Target status removed BGF119 Data Sheet V3.0, 2008-11-18 Transient Voltage Suppressor Features • 1 channel TVS diode designed for portable application • ESD protection according to IEC61000-4-2 for +/-15 kV contact discharge on all IOs • Wafer Level Package with SnAgCu solder balls • RoHS and WEEE compliant package • Very small form factor TVS • High peak pulse power • Stand-off voltage up to 8 V • Low clamping voltage factor Vcl/Vbr • Fast response time BGF119 Transient Voltage Suppressor WLP-4-1-3D The BGF119 is a single line TVS diode designed for transient voltage and power overstress suppression. All pins are protected against ESD pulses of 15kV contact discharge according to IEC61000-4-2. The wafer level package is a green package with a size of only mm x mm and a total height of mm. Type BGF119 Package WLP-4-1 Marking BGF119 Chip N0742 Data Sheet V3.0, 2008-11-18 BGF119 Transient Voltage Suppressor Table 1 Maximum Ratings Parameter Voltage at all pins to GND Operating temperature range Storage temperature range TSTG Electrostatic discharge according to IEC61000- VESD 4-21 at all pins |
| More datasheets: 98204-99 | DCMM-37S-M | DBMMY17W2S | DAMM7H2SJA101 | KSK-1C90U-1015 | DEMAM15SA197F0 | PD64012GH | V23826-H18-C63 | V23826-H18-C363D3 | V23826-H18-C363 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BGF119E6329XTSA1 Datasheet file may be downloaded here without warranties.