AUIPS1041L

AUIPS1041L Datasheet

AUIPS1041 L R /AUIPS1042G

Part	Datasheet
AUIPS1041L	AUIPS1041L (pdf)

Related Parts	Information
AUIPS1041LTR	AUIPS1041LTR
AUIPS1042G	AUIPS1042G
AUIPS1041R	AUIPS1041R

PDF Datasheet Preview
May, 9th 2012 Automotive grade AUIPS1041 L R /AUIPS1042G SINGLE/DUAL CHANNEL INTELLIGENT POWER LOW SIDE SWITCH • Over temperature shutdown • Over current shutdown • Active clamp • Low current & logic level input • ESD protection • Optimized Turn On/Off for EMI • Diagnostic on the input current The AUIPS1041 L R and AUIPS1042G are three terminal Intelligent Power Switches IPS featuring low side MOSFETs with over-current, over-temperature, ESD protection and drain to source active clamp. The AUIPS1042G is a dual channel device while the AUIPS1041 is a single channel. These devices offer protections and the high reliability required in harsh environments. Each switch provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165°C or when the drain current reaches 4.5A. The device restarts once the input is cycled. A serial resistance connected to the input provides the diagnostic. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations. Product Summary Rds on max. Vclamp Ishutdown 4.5A typ. Packages SOT-223 SO-8 D-Pak AUIPS1041L AUIPS1042G AUIPS1041R Typical Connection +Bat 2-4 AUIPS1042G 1 AUIPS1041 L R IN Input R Input Signal V Diag Control Load D 5-6-7-8 AUIPS1042G AUIPS1041 L R 1-3 AUIPS1042G 3 AUIPS1041 L R AUIPS1041 L R / AUIPS1042G Qualification Information† Qualification Level Moisture Sensitivity Level Machine Model Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant Automotive per AEC-Q100†† Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. DPAK-3L MSL1, 260°C per IPC/JEDEC J-STD-020 SOT223-3L MSL2, 260°C per IPC/JEDEC J-STD-020 8L-SOICN MSL2, 260°C per IPC/JEDEC J-STD-020 Ordering Information Base Part Number Package Type AUIPS1042 SOIC-8 AUIPS1041 SOT-223 AUIPS1041 D-Pak-5-Lead Standard Pack Form Tube Tape and reel Tube Tape and reel Tube Tape and reel Tape and reel left Tape and reel right Quantity 95 2500 80 2500 75 2000 3000 Complete Part Number AUIPS1042G AUIPS1042GTR AUIPS1041L AUIPS1041LTR AUIPS1041R AUIPS1041RTR AUIPS1041RTRL AUIPS1041RTRR AUIPS1041 L R / AUIPS1042G IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR’s Technical Assistance Center WORLD HEADQUARTERS 101 N Sepulbeda Blvd., El Segundo, California 90245 Tel 310 252-7105 AUIPS1041 L R / AUIPS1042G C1 C2 C3 C4 D E F G November, 24th, 2010 December, 7th 2010 December, 9th 2010 December, 14th 2010 February, 28th 2011 March, 14th 2011 November, 14th 2011 May 9th, 2012 Notes/Changes AU release Remove ESD section page 3 Update qual page Update Tdon Update Max rating Update part marking Update T&R SOT223 Update component number for the SOT223 tube.

PDF Datasheet Preview

May, 9th 2012

Automotive grade

AUIPS1041 L R /AUIPS1042G

SINGLE/DUAL CHANNEL INTELLIGENT POWER LOW SIDE SWITCH
• Over temperature shutdown
• Over current shutdown
• Active clamp
• Low current & logic level input
• ESD protection
• Optimized Turn On/Off for EMI
• Diagnostic on the input current

The AUIPS1041 L R and AUIPS1042G are three terminal Intelligent Power Switches IPS featuring low side MOSFETs with over-current, over-temperature, ESD protection and drain to source active clamp. The AUIPS1042G is a dual channel device while the AUIPS1041 is a single channel. These devices offer protections and the high reliability required in harsh environments. Each switch provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165°C or when the drain current reaches 4.5A. The device restarts once the input is cycled. A serial resistance connected to the input provides the diagnostic. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations.

Product Summary

Rds on max.

Vclamp

Ishutdown 4.5A typ.

Packages

SOT-223

SO-8

D-Pak

AUIPS1041L AUIPS1042G AUIPS1041R

Typical Connection
+Bat
2-4 AUIPS1042G 1 AUIPS1041 L R IN

Input R

Input Signal V Diag

Control

Load D
5-6-7-8 AUIPS1042G

AUIPS1041 L R
1-3 AUIPS1042G 3 AUIPS1041 L R

AUIPS1041 L R / AUIPS1042G

Qualification Information†

Qualification Level

Moisture Sensitivity Level

Machine Model

Human Body Model

Charged Device Model

IC Latch-Up Test RoHS Compliant

Automotive per AEC-Q100††

Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level.

DPAK-3L

MSL1, 260°C per IPC/JEDEC J-STD-020

SOT223-3L

MSL2, 260°C per IPC/JEDEC J-STD-020
8L-SOICN

MSL2, 260°C per IPC/JEDEC J-STD-020
Ordering Information

Base Part Number Package Type

AUIPS1042

SOIC-8

AUIPS1041

SOT-223

AUIPS1041

D-Pak-5-Lead

Standard Pack

Form Tube Tape and reel Tube Tape and reel Tube Tape and reel Tape and reel left Tape and reel right

Quantity 95
2500 80
2500 75
2000 3000

Complete Part Number

AUIPS1042G AUIPS1042GTR

AUIPS1041L AUIPS1041LTR

AUIPS1041R AUIPS1041RTR AUIPS1041RTRL AUIPS1041RTRR

AUIPS1041 L R / AUIPS1042G

IMPORTANT NOTICE

Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.

IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards.

Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.

IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.

IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements.

For technical support, please contact IR’s Technical Assistance Center

WORLD HEADQUARTERS 101 N Sepulbeda Blvd., El Segundo, California 90245

Tel 310 252-7105

AUIPS1041 L R / AUIPS1042G

C1 C2 C3 C4 D E F G

November, 24th, 2010 December, 7th 2010 December, 9th 2010 December, 14th 2010 February, 28th 2011 March, 14th 2011 November, 14th 2011

May 9th, 2012

Notes/Changes

AU release Remove ESD section page 3 Update qual page Update Tdon Update Max rating Update part marking Update T&R SOT223 Update component number for the SOT223 tube.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AUIPS1041L Datasheet file may be downloaded here without warranties.

Datasheet ID: AUIPS1041L 637602