AUIPS1021R

AUIPS1021R Datasheet

AUIPS1021 S R

Part	Datasheet
AUIPS1021R	AUIPS1021R (pdf)

Related Parts	Information
AUIPS1021	AUIPS1021
AUIPS1021S	AUIPS1021S

PDF Datasheet Preview
February, 28th 2011 Automotive grade AUIPS1021 S R INTELLIGENT POWER LOW SIDE SWITCH • Over temperature shutdown • Over current shutdown • Active clamp • Low current & logic level input • ESD protection • Optimized Turn On/Off for EMI • Diagnostic on the input current The AUIPS1021 S R is a three terminal Intelligent Power Switch IPS that features a low side MOSFET with overcurrent, over-temperature, ESD protection and drain to source active clamp. This device offers protections and the high reliability required in harsh environments. The switch provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165°C or when the drain current reaches 45A. The device restarts once the input is cycled. A serial resistance connected to the input provides the diagnostic. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations. Product Summary Rds on max. Vclamp Ishutdown 45A typ. Packages TO-220 D-Pak AUIPS1021 AUIPS1021S AUIPS1021R Typical Connection +Bat Load Input R Input Signal V Diag Control IN AUIPS1021 S R Qualification Information† Qualification Level Automotive per AEC-Q100†† Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. DPAK-3L MSL1, 260°C per IPC/JEDEC J-STD-020 Moisture Sensitivity Level D2PAK-3L MSL1, 260°C per IPC/JEDEC J-STD-020 Machine Model Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant TO220-5L Not applicable Class M4 +/-450V per AEC-Q100-003 Class H2 +/-2500V per AEC-Q100-002 Class C4 +/-1000V per AEC-Q100-011 Class II, Level A per AEC-Q100-004 † Qualification standards can be found at International Rectifier’s web site †† Exceptions to AEC-Q100 requirements are noted in the qualification report. AUIPS1021 S R Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. Tj= -40°C..150°C, Vcc=6..36V unless otherwise specified . Ordering Information Base Part Number Package Type TO220 5Leads AUIPS1021 D2-Pak-5Leads D-Pak-5-Lead Standard Pack Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right Quantity 50 800 75 2000 3000 Complete Part Number AUIPS1021 AUIPS1021S AUIPS1021STRL AUIPS1021STRR AUIPS1021R AUIPS1021RTR AUIPS1021RTRL AUIPS1021RTRR AUIPS1021 S R IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR’s Technical Assistance Center WORLD HEADQUARTERS 233 Kansas St., El Segundo, California 90245 Tel 310 252-7105 AUIPS1021 S R D D1 D2 E F November, 24th, 2010 December, 7th December, 9th 2010 February, 8th 2011 February, 28th 2011 Notes/Changes AU release Remove ESD section page 3 Update qual page 2 Update Vclamp page 1 Update Max rating

PDF Datasheet Preview

February, 28th 2011

Automotive grade

AUIPS1021 S R

INTELLIGENT POWER LOW SIDE SWITCH
• Over temperature shutdown
• Over current shutdown
• Active clamp
• Low current & logic level input
• ESD protection
• Optimized Turn On/Off for EMI
• Diagnostic on the input current

The AUIPS1021 S R is a three terminal Intelligent Power Switch IPS that features a low side MOSFET with overcurrent, over-temperature, ESD protection and drain to source active clamp. This device offers protections and the high reliability required in harsh environments. The switch provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165°C or when the drain current reaches 45A. The device restarts once the input is cycled. A serial resistance connected to the input provides the diagnostic. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations.

Product Summary

Rds on max.

Vclamp

Ishutdown 45A typ.

Packages

TO-220

D-Pak

AUIPS1021 AUIPS1021S AUIPS1021R

Typical Connection
+Bat Load

Input R

Input Signal V Diag

Control IN

AUIPS1021 S R

Qualification Information†

Qualification Level

Automotive per AEC-Q100†† Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level.

DPAK-3L

MSL1, 260°C per IPC/JEDEC J-STD-020

Moisture Sensitivity Level

D2PAK-3L

MSL1, 260°C per IPC/JEDEC J-STD-020

Machine Model

Human Body Model

Charged Device Model

IC Latch-Up Test RoHS Compliant

TO220-5L

Not applicable

Class M4 +/-450V per AEC-Q100-003 Class H2 +/-2500V per AEC-Q100-002 Class C4 +/-1000V per AEC-Q100-011

Class II, Level A per AEC-Q100-004
† Qualification standards can be found at International Rectifier’s web site †† Exceptions to AEC-Q100 requirements are noted in the qualification report.

AUIPS1021 S R

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. Tj= -40°C..150°C,

Vcc=6..36V unless otherwise specified .
Ordering Information

Base Part Number Package Type

TO220 5Leads

AUIPS1021

D2-Pak-5Leads

D-Pak-5-Lead

Standard Pack

Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right

Quantity 50 800 75
2000 3000

Complete Part Number

AUIPS1021 AUIPS1021S AUIPS1021STRL AUIPS1021STRR AUIPS1021R AUIPS1021RTR AUIPS1021RTRL AUIPS1021RTRR

AUIPS1021 S R

IMPORTANT NOTICE

Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.

IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards.

Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.

IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.

IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements.

For technical support, please contact IR’s Technical Assistance Center

WORLD HEADQUARTERS 233 Kansas St., El Segundo, California 90245

Tel 310 252-7105

AUIPS1021 S R

D D1 D2 E F

November, 24th, 2010

December, 7th December, 9th 2010

February, 8th 2011

February, 28th 2011

Notes/Changes

AU release Remove ESD section page 3 Update qual page 2 Update Vclamp page 1 Update Max rating

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AUIPS1021R Datasheet file may be downloaded here without warranties.

Datasheet ID: AUIPS1021R 637600