AUIPS1011STRL

AUIPS1011STRL Datasheet

AUIPS1011 S R

Part	Datasheet
AUIPS1011STRL	AUIPS1011STRL (pdf)

Related Parts	Information
AUIPS1011RTRL	AUIPS1011RTRL
AUIPS1011R	AUIPS1011R
AUIPS1011S	AUIPS1011S
AUIPS1011	AUIPS1011

PDF Datasheet Preview
June, 21st 2012 Automotive grade AUIPS1011 S R INTELLIGENT POWER LOW SIDE SWITCH • Over temperature shutdown • Over current shutdown • Active clamp • Low current & logic level input • ESD protection • Optimized Turn On/Off for EMI • Diagnostic on the input current Product Summary Rds on max. Vclamp Ishutdown 85A typ. The AUIPS1011 S R is a three terminal Intelligent Power Switch IPS that features a low side MOSFET with overcurrent, over-temperature, ESD protection and drain to source active clamp. This device offers protections and the high reliability required in harsh environments. The switch provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165°C or when the drain current reaches 85A. The device restarts once the input is cycled. A serial resistance connected to the input provides the diagnostic. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations. Packages TO-220 AUIPS1011 AUIPS1011S D-Pak AUIPS1011R Typical Connection +Bat Input R Input Signal V Diag Load D2 1 Control AUIPS1011 S R Qualification Information† Qualification Level Automotive per AEC-Q100 Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. DPAK-3L MSL1, 260°C per IPC/JEDEC J-STD-020 Moisture Sensitivity Level D2PAK-3L MSL1, 260°C per IPC/JEDEC J-STD-020 Machine Model Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant TO220-5L Not applicable Class M4 +/-450V per AEC-Q100-003 Class H2 +/-2500V per AEC-Q100-002 Class C4 +/-1000V per AEC-Q100-011 Class II, Level A per AEC-Q100-004 † Qualification standards can be found at International Rectifier’s web site AUIPS1011 S R Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. Tj= -40°C..150°C, Ordering Information Base Part Number Package Type TO220 5Leads AUIPS1011 D2-Pak-5Leads D-Pak-5-Lead Standard Pack Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right Quantity 50 800 75 2000 3000 Complete Part Number AUIPS1011 AUIPS1011S AUIPS1011STRL AUIPS1011STRR AUIPS1011R AUIPS1011RTR AUIPS1011RTRL AUIPS1011RTRR AUIPS1011 S R IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. Only products certified as military grade by the Defense Logistics Agency DLA of the US Department of Defense, are designed and manufactured to meet DLA military specifications required by certain military, aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements For technical support, please contact IR’s Technical Assistance Center WORLD HEADQUARTERS 101 N. Sepulveda Blvd., El Segundo, California 90245 Tel 310 252-7105

PDF Datasheet Preview

June, 21st 2012

Automotive grade

AUIPS1011 S R

INTELLIGENT POWER LOW SIDE SWITCH
• Over temperature shutdown
• Over current shutdown
• Active clamp
• Low current & logic level input
• ESD protection
• Optimized Turn On/Off for EMI
• Diagnostic on the input current

Product Summary

Rds on max.

Vclamp

Ishutdown 85A typ.

The AUIPS1011 S R is a three terminal Intelligent Power Switch IPS that features a low side MOSFET with overcurrent, over-temperature, ESD protection and drain to source active clamp. This device offers protections and the high reliability required in harsh environments. The switch provides efficient protection by turning OFF the power MOSFET when the temperature exceeds 165°C or when the drain current reaches 85A. The device restarts once the input is cycled. A serial resistance connected to the input provides the diagnostic. The avalanche capability is significantly enhanced by the active clamp and covers most inductive load demagnetizations.

Packages

TO-220

AUIPS1011 AUIPS1011S

D-Pak AUIPS1011R

Typical Connection
+Bat

Input R

Input Signal V Diag

Load D2
1 Control

AUIPS1011 S R

Qualification Information†

Qualification Level

Automotive per AEC-Q100 Comments This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level.

DPAK-3L

MSL1, 260°C per IPC/JEDEC J-STD-020

Moisture Sensitivity Level

D2PAK-3L

MSL1, 260°C per IPC/JEDEC J-STD-020

Machine Model

Human Body Model

Charged Device Model

IC Latch-Up Test RoHS Compliant

TO220-5L

Not applicable

Class M4 +/-450V per AEC-Q100-003 Class H2 +/-2500V per AEC-Q100-002 Class C4 +/-1000V per AEC-Q100-011

Class II, Level A per AEC-Q100-004
† Qualification standards can be found at International Rectifier’s web site

AUIPS1011 S R

Absolute Maximum Ratings

Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. Tj= -40°C..150°C,
Ordering Information

Base Part Number Package Type

TO220 5Leads

AUIPS1011

D2-Pak-5Leads

D-Pak-5-Lead

Standard Pack

Form Tube Tape and reel left Tape and reel right Tube Tape and reel Tape and reel left Tape and reel right

Quantity 50 800 75
2000 3000

Complete Part Number

AUIPS1011 AUIPS1011S AUIPS1011STRL AUIPS1011STRR AUIPS1011R AUIPS1011RTR AUIPS1011RTRL AUIPS1011RTRR

AUIPS1011 S R

IMPORTANT NOTICE

Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries IR reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.

IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.

IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards.

Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions.

Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements.

IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.

Only products certified as military grade by the Defense Logistics Agency DLA of the US Department of Defense, are designed and manufactured to meet DLA military specifications required by certain military, aerospace or other applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements

For technical support, please contact IR’s Technical Assistance Center

WORLD HEADQUARTERS 101 N. Sepulveda Blvd., El Segundo, California 90245

Tel 310 252-7105

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AUIPS1011STRL Datasheet file may be downloaded here without warranties.

Datasheet ID: AUIPS1011STRL 637599