PEF22810T-V21TR

PEF22810T-V21TR Datasheet

PEF 22810 VDSL-L

Part	Datasheet
PEF22810T-V21TR	PEF22810T-V21TR (pdf)

PDF Datasheet Preview
10BaseSTM is an innovative technology offering the simplicity of Ethernet coupled with the high performance of VDSL. Utilizing 10BaseS, a system delivers 10 Mbit/s, full duplex Ethernet over existing copper wire infrastructure up to a distance of 4000 ft / 1200 m. It simultaneously supports high speed DATA transmission with POTS, ISDN or PBX signaling, without disruption. Ethernet MAC and PHY functionality are integrated into Infineon’s 10BaseS chipset, achieving direct connectivity with standard Ethernet physical layer and switching devices. Its VDSL technology uses frequency duplexing and QAM modulation to provide robust operation. Its spectral allocation allows noise-free coexistence with other xDSL technologies in the same bundle. 10BaseS is the best solution for distribution of broadband services in MDU/MTU and hospitality markets and the most suitable solution for broadband LAN extension applications. s Multiple Dwelling/Tenant Units MDU/MTU networking s Hospitality networking s Multi-building campus networking s High speed industrial environment network s Fiber, broadband wireless and cable LAN extension 1 0 B a s e S No need for glue logic. Standard s Spectral allocation allows noise- interfaces provide direct connec- free operation with xDSL, ISDN tion to Ethernet MAC and PHY 2B1Q/4B3T , “Smartphone” devices digital PBX devices s Address filtering, self-learning s Transmit Notch filter, Scrambler, and aging up to 32 addresses Reed-Solomon Forward Error s Internal buffering, back pressure and IEEE 802.3x flow control capabilities Correction FEC and Convolutional Interleaver with internal SRAM s Configurable as Ethernet MAC for direct operation with standard Ethernet PHY in Customer s Link watchdog combined with robust link configuration ensures link establishment s Symmetric 10 or 100 Mbit/s Ethernet speed at full duplex s Compatible with IEEE Ethernet MII, RMII, SMII and 7 wire interfaces Premises Equipment CPE s Supports Ethernet SNMP MIB counters s Quadrature Amplitude Modulation QAM s Transmit power management s Low power consumption - W including line driver s Power boost for extended reach s Power down mode with fast warm s Configurable as standard s Frequency division duplexing start capability < 100 ms Ethernet PHY for use in switch s Symmetrical/asymmetrical line s Digitally Controlled Crystal Oscil- or NIC applications rates from below 1 Mbit/s up to lator DCXO for timing recovery Ordering Information Design Tools Product Name Sales Code Package 10BaseS Demo Kit 10BaseS 22822 Two Boards 10BaseS Modem Kit SV2100-52-B2 Two Boards 10BaseS LT and NT Evaluation Boards 10BaseS LT and NT Demonstration Boards Chipset Product Name Sales Code Package VDSL-L PEF 22810 T V2.1 P-DSO-8 VDSL Line Driver Chip VDSL-A PEB 22811 H V1.3 P-MQFP-64 VDSL Analog Chip 10BaseS-D PEF 22822 F V2.2 P-TQFP-144 Digital Chip 10BaseS-D PEF 22822 EL V2.2 P-LFBGA-176 Digital Chip PEF 22810 VDSL-L 10/100 BaseT Ethernet 10BaseS Digital Chip PEF 22822 VDSL Analog Chip PEB 22811 VDSL Line Driver PEF 22810 Filters, POTS/ ISDN Splitter Ethernet over VDSL 10BaseS CPE Application Example Ethernet PHY 10BaseS Chipset How to reach us: Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81541 München Infineon Technologies AG All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Published by Infineon Technologies AG Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Ordering No. B115-H7652-G1-X-7600 Printed in Germany

PDF Datasheet Preview

10BaseSTM is an innovative technology offering the simplicity of Ethernet coupled with the high performance of VDSL. Utilizing 10BaseS, a system delivers 10 Mbit/s, full duplex Ethernet over existing copper wire infrastructure up to a distance of 4000 ft / 1200 m. It simultaneously supports high speed DATA transmission with POTS, ISDN or PBX signaling, without disruption.

Ethernet MAC and PHY functionality are integrated into Infineon’s 10BaseS chipset, achieving direct connectivity with standard Ethernet physical layer and switching devices. Its VDSL technology uses frequency duplexing and QAM modulation to provide robust operation. Its spectral allocation allows noise-free coexistence with other xDSL technologies in the same bundle.
10BaseS is the best solution for distribution of
broadband services in MDU/MTU and hospitality
markets and the most suitable solution for
broadband LAN extension applications.
s Multiple Dwelling/Tenant Units MDU/MTU networking
s Hospitality networking s Multi-building campus networking s High speed industrial
environment network s Fiber, broadband wireless and
cable LAN extension
1 0 B a s e S No need for glue logic. Standard s Spectral allocation allows noise-
interfaces provide direct connec-
free operation with xDSL, ISDN
tion to Ethernet MAC and PHY
2B1Q/4B3T , “Smartphone”
devices
digital PBX devices
s Address filtering, self-learning
s Transmit Notch filter, Scrambler,
and aging up to 32 addresses

Reed-Solomon Forward Error
s Internal buffering, back pressure and IEEE 802.3x flow control capabilities

Correction FEC and Convolutional Interleaver with internal SRAM
s Configurable as Ethernet MAC for direct operation with standard Ethernet PHY in Customer
s Link watchdog combined with robust link configuration ensures link establishment
s Symmetric 10 or 100 Mbit/s Ethernet speed at full duplex
s Compatible with IEEE Ethernet MII, RMII, SMII and 7 wire interfaces

Premises Equipment CPE
s Supports Ethernet SNMP MIB counters
s Quadrature Amplitude Modulation QAM
s Transmit power management s Low power consumption - W
including line driver s Power boost for extended reach s Power down mode with fast warm
s Configurable as standard
s Frequency division duplexing
start capability < 100 ms

Ethernet PHY for use in switch
s Symmetrical/asymmetrical line
s Digitally Controlled Crystal Oscil-
or NIC applications
rates from below 1 Mbit/s up to
lator DCXO for timing recovery
Ordering Information Design Tools

Product Name

Sales Code Package
10BaseS Demo Kit 10BaseS 22822 Two Boards
10BaseS Modem Kit SV2100-52-B2 Two Boards
10BaseS LT and NT Evaluation Boards
10BaseS LT and NT Demonstration Boards

Chipset

Product Name Sales Code

Package

VDSL-L

PEF 22810 T V2.1 P-DSO-8

VDSL Line Driver Chip

VDSL-A

PEB 22811 H V1.3 P-MQFP-64 VDSL Analog Chip
10BaseS-D PEF 22822 F V2.2 P-TQFP-144 Digital Chip
10BaseS-D PEF 22822 EL V2.2 P-LFBGA-176 Digital Chip

PEF 22810 VDSL-L
10/100 BaseT Ethernet
10BaseS Digital Chip PEF 22822

VDSL Analog Chip PEB 22811

VDSL Line Driver PEF 22810

Filters, POTS/ ISDN Splitter

Ethernet over VDSL
10BaseS CPE Application Example

Ethernet PHY
10BaseS Chipset

How to reach us:

Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81541 München

Infineon Technologies AG All Rights Reserved.

Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics.

Terms of delivery and rights to technical change reserved.

We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.

Infineon Technologies is an approved CECC manufacturer.

Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide.

Published by Infineon Technologies AG

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
Ordering No. B115-H7652-G1-X-7600

Printed in Germany

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PEF22810T-V21TR Datasheet file may be downloaded here without warranties.

Datasheet ID: PEF22810T-V21TR 637581