HPX050AS

HPX050AS Datasheet

HPX Series

Part	Datasheet
HPX050AS	HPX050AS (pdf)

Related Parts	Information
HPX030GD	HPX030GD
HPX100AS	HPX100AS
HPX015GD	HPX015GD
HPX050GD	HPX050GD
HPX015AS	HPX015AS
HPX005GD	HPX005GD
HPX030AS	HPX030AS
HPX100GD	HPX100GD

PDF Datasheet Preview
Microstructure Pressure Sensors 0 mm Hg to 300 mm Hg through 0 psi to 100 psi HPX Series FEATURES • Miniature package size • Available in gage and absolute sensing types • Non-compensated and non- calibrated • Pressure ranges from 0 psi to 100 psi • Response time is 1 ms typical • Two package styles, DIP and SOIC • Wide operating temperature range • Surface mount and through hole mounting TYPICAL APPLICATIONS • Medical equipment • Altimeters and barometers • Pneumatic controls • Leak detection • Consumer goods The HPX Series Pressure Sensors provide accurate, low cost sensing in two different package configurations, DIP Dual In-line Package and SOIC Small Outline Integrated Circuit . The gage devices come in a 6-pin DIP and the absolute devices come in an 8 pin surface mount SOIC package. Both sensor styles are non-amplified and non-calibrated. The user may provide the HPX Series sensors with amplification and signal conditioning circuitry to meet specific application requirements. These easy-to-use sensors feature Wheatstone bridge construction, silicon piezoresistive technology and ratiometric output for proven application flexibility, design simplicity and ease of end product manufacturing. These devices are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Sensing and Control WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Microstructure Pressure Sensors 0 mm Hg to 300 mm Hg through 0 psi to 100 psi HPX Series GENERAL SPECIFICATIONS GAGE DIP Parameter Min. Excitation Input impedance Output impedance Typ. 5k Max. 6k Unit Vdc Ohm ENVIRONMENTAL SPECIFICATIONS GAGE DIP Parameter Characteristic Operating temperature range -20 °C to 100 °C [-4 °F to 212 °F] Storage -40 °C to 125 °C [-40 °F to 257 °F] Vibration

PDF Datasheet Preview

Microstructure Pressure Sensors 0 mm Hg to 300 mm Hg through 0 psi to 100 psi

HPX Series

FEATURES
• Miniature package size
• Available in gage and
absolute sensing types
• Non-compensated and non-
calibrated
• Pressure ranges from
0 psi to 100 psi
• Response time is 1 ms
typical
• Two package styles, DIP
and SOIC
• Wide operating temperature
range
• Surface mount and through
hole mounting

TYPICAL APPLICATIONS
• Medical equipment
• Altimeters and barometers
• Pneumatic controls
• Leak detection
• Consumer goods

The HPX Series Pressure Sensors provide accurate, low cost sensing in two different package configurations, DIP Dual In-line Package and SOIC Small Outline Integrated Circuit .

The gage devices come in a 6-pin DIP and the absolute devices come in an 8 pin surface mount SOIC package. Both sensor styles are non-amplified and non-calibrated. The user may provide the HPX Series sensors with amplification and signal conditioning circuitry to meet specific application requirements.

These easy-to-use sensors feature Wheatstone bridge construction, silicon piezoresistive technology and ratiometric output for proven application flexibility, design simplicity and ease of end product manufacturing.

These devices are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases.

WARNING

PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.

Sensing and Control

WARNING

MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do
not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is
provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.

Microstructure Pressure Sensors 0 mm Hg to 300 mm Hg through 0 psi to 100 psi

HPX Series

GENERAL SPECIFICATIONS GAGE DIP

Parameter

Min.

Excitation

Input impedance

Output impedance

Typ. 5k

Max. 6k

Unit Vdc Ohm

ENVIRONMENTAL SPECIFICATIONS GAGE DIP

Parameter

Characteristic

Operating temperature range
-20 °C to 100 °C [-4 °F to 212 °F]

Storage
-40 °C to 125 °C [-40 °F to 257 °F]

Vibration

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HPX050AS Datasheet file may be downloaded here without warranties.

Datasheet ID: HPX050AS 636496