HFE7000-210

HFE7000-210 Datasheet

HFE7000-210

Part	Datasheet
HFE7000-210	HFE7000-210 (pdf)

Related Parts	Information
HFE7000-210I	HFE7000-210I

PDF Datasheet Preview
Fiber Optic Components 50 Mbps 650 nm LED HFE7000-210 FEATURES • Super bright LED for optical fiber communication • Integrated lens provides maximum coupling into plastic fibers • High power output at 650 nm • High speed 50 Mbps • High reliability • Designed to meet SERCOS requirements WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided with each product. Failure to comply with these instructions could result in death or serious injury. HFE7000-210 DESCRIPTION The HFE7000-210 is a 50 Mbps LED designed to meet the data transmission requirements needed in factory and office automation. The 650 nm wavelength provides operation for the low attenuation area of PMMA Polymethylmethacrylat fibers. The plastic SMA housing delivers a cost-effective module that can be easily mounted on a PCB. The HFE7000-210 is designed to work with Honeywell’s high-speed receivers, HFD7000-XXX and HFD7500-XXX. APPLICATIONS Designed for data transmission in factory automation and office settings. The HFE7000-210 delivers high speed and short distance links. FIGURE PACKAGE INFORMATION Outline dimensions mm [in] for reference only NOTICE Stress greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. Sensing and Control Fiber Optic Components 50 Mbps 650 nm LED HFE7000-210 ABSOLUTE MAXIMUM RATINGS TA = 25 °C [77 °F] Parameter Rating Forward current 40 mA VR PMax TSold TOp TStor 5V 250 mW 230 °C [446 °F] for 5 sec 0 °C to 70 °C [32 °F to 338 °F] -40 °C to 85 °C [-40 °F to 185 °F] 1 Derate power dissipation at a rate of mW/°C above TA = 25 °C [77 °F]. ELECTRO-OPTICAL CHARACTERISTICS TA = 25 °C [77 °F] Parameters Test Condition Symbol Min. Data rate Forward voltage Driven by recommended circuit fD If = 20 mA Vr = 5 V Output power If = 10 mA If = 20 mA Po -10 Peak wavelength If = 20 mA

PDF Datasheet Preview

Fiber Optic Components 50 Mbps 650 nm LED

HFE7000-210

FEATURES
• Super bright LED for optical fiber
communication
• Integrated lens provides
maximum coupling into plastic fibers
• High power output at 650 nm
• High speed 50 Mbps
• High reliability
• Designed to meet SERCOS requirements

WARNING

PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.

WARNING

MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do not use this document as a product installation guide.
• Complete installation, operation, and maintenance information is provided with each product.

Failure to comply with these instructions could result in death or serious injury.

HFE7000-210

DESCRIPTION The HFE7000-210 is a 50 Mbps LED designed to meet the data
transmission requirements needed in factory and office automation. The 650 nm wavelength provides operation for the low attenuation area of PMMA Polymethylmethacrylat fibers. The plastic SMA housing delivers a cost-effective module that can be easily mounted on a PCB. The HFE7000-210 is designed to work with Honeywell’s high-speed receivers, HFD7000-XXX and HFD7500-XXX. APPLICATIONS

Designed for data transmission in factory automation and office settings. The HFE7000-210 delivers high speed and short distance links.

FIGURE PACKAGE INFORMATION Outline dimensions mm [in] for reference only

NOTICE

Stress greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability.

Sensing and Control

Fiber Optic Components 50 Mbps 650 nm LED

HFE7000-210

ABSOLUTE MAXIMUM RATINGS TA = 25 °C [77 °F]

Parameter

Rating

Forward current
40 mA

VR PMax TSold TOp TStor
5V 250 mW 230 °C [446 °F] for 5 sec 0 °C to 70 °C [32 °F to 338 °F] -40 °C to 85 °C [-40 °F to 185 °F]
1 Derate power dissipation at a rate of mW/°C above TA = 25 °C [77 °F].

ELECTRO-OPTICAL CHARACTERISTICS TA = 25 °C [77 °F]

Parameters

Test Condition

Symbol Min.

Data rate Forward voltage

Driven by recommended circuit fD

If = 20 mA

Vr = 5 V

Output power

If = 10 mA If = 20 mA

Po -10

Peak wavelength

If = 20 mA

More datasheets: MOC215M | 610D | 610F | 610E | 610G | 610H | DDE50SA197 | MAXREFDES100# | DBME-25P-K87 | HFE7000-210I

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFE7000-210 Datasheet file may be downloaded here without warranties.

Datasheet ID: HFE7000-210 636473