HFE4026-313/BBA

HFE4026-313/BBA Datasheet

HFE4026

Part	Datasheet
HFE4026-313/BBA	HFE4026-313/BBA (pdf)

Related Parts	Information
HFE4026-313	HFE4026-313

PDF Datasheet Preview
HFE4026 Low Drive Current Fiber Optic LED, Metal Package FEATURES • High speed 70 MHz • Optimized for linear optical output with drive currents between 5 and 60 mA • Metal TO-18 style package • High reliability • Power out designed for drive currents between 5 and 60 mA DESCRIPTION The HFE4026 is a high radiance GaAlAs 850 nanometer LED optimized for coupling into small fiber core diameters at a forward current of 5 to 60 mA. The patented "Caprock" LED chip is designed to combine high power coupling with wide bandwidth. The peak wavelength is matched for use with Honeywell silicon fiber optic detectors and receivers. When the HFE4026 is used at elevated temperatures, thermal resistance must be taken into consideration. APPLICATION The HFE4026 is a high radiance LED packaged on a TO-18 header with a metal can. Data rates can vary from DC to above 70 MHz depending upon component application. The LED is designed for use in fiber optic communications. As the current varies typically from 5 to 60 mA , the light intensity increases proportionally. Heat sinking is recommended to maintain the expected long life. If the HFE4026 is heat sinked, the package has a typical thermal resistance of per watt. If not heat sinked, typical thermal resistance is per watt. The HFE4026 LED is designed to give high fiber coupled power high radiance into a standard fiber optic cable . In order to enhance the light being sent into a fiber optic cable, a mm diameter glass microlens is placed over the "Caprock" junction. The microlens collimates the light, increasing the intensity directed toward a fiber optic cable. This creates a "SWEET SPOT" of power, allowing greater power to be launched into standard fiber optic cables. FIBER001.TIF OUTLINE DIMENSIONS in inches mm FIBER002.DIM Pinout Anode case Cathode Not connected Honeywell reserves the right to make changes in order to improve design and supply the best products possible. HFE4026 Low Drive Current Fiber Optic LED, Metal Package ELECTRO-OPTICAL CHARACTERISTICS < TÙ < unless otherwise stated PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS Fiber Coupled Power HFE4026-313 PÞÙ = 6 mA, 100/140 micron, NA fiber, T = [À] Forward Voltage = 50 mA = 6 mA Iß = 10 µA Peak Wavelength = 25 mA DC Spectral Bandwidth = 25 mA DC Response Time 1 V Prebias, 50 mA peak T = 10-90% 12 20 T = 90-10% 12 20 Analog Bandwidth = 50 mA DC, small signal sinusoidal modulation PÞ Temperature Coefficient

PDF Datasheet Preview

HFE4026

Low Drive Current Fiber Optic LED, Metal Package

FEATURES
• High speed 70 MHz
• Optimized for linear optical output with drive
currents between 5 and 60 mA
• Metal TO-18 style package
• High reliability
• Power out designed for drive currents between 5
and 60 mA

DESCRIPTION The HFE4026 is a high radiance GaAlAs 850 nanometer LED optimized for coupling into small fiber core diameters at a forward current of 5 to 60 mA. The patented "Caprock" LED chip is designed to combine high power coupling with wide bandwidth. The peak wavelength is matched for use with Honeywell silicon fiber optic detectors and receivers. When the HFE4026 is used at elevated temperatures, thermal resistance must be taken into consideration.

APPLICATION The HFE4026 is a high radiance LED packaged on a TO-18 header with a metal can. Data rates can vary from DC to above 70 MHz depending upon component application. The LED is designed for use in fiber optic communications. As the current varies typically from 5 to 60 mA , the light intensity increases proportionally. Heat sinking is recommended to maintain the expected long life. If the HFE4026 is heat sinked, the package has a typical thermal resistance of per watt. If not heat sinked, typical thermal resistance is per watt.

The HFE4026 LED is designed to give high fiber coupled power high radiance into a standard fiber optic cable . In order to enhance the light being sent into a fiber optic cable, a mm diameter glass microlens is placed over the "Caprock" junction. The microlens collimates the light, increasing the intensity directed toward a fiber optic cable. This creates a "SWEET SPOT" of power, allowing greater power to be launched into standard fiber optic cables.

FIBER001.TIF

OUTLINE DIMENSIONS in inches mm

FIBER002.DIM

Pinout Anode case Cathode Not connected

Honeywell reserves the right to make changes in order to improve design and
supply the best products possible.

HFE4026

Low Drive Current Fiber Optic LED, Metal Package

ELECTRO-OPTICAL CHARACTERISTICS < TÙ < unless otherwise stated

PARAMETER

SYMBOL MIN TYP MAX UNITS

TEST CONDITIONS

Fiber Coupled Power HFE4026-313 PÞÙ
= 6 mA, 100/140 micron,

NA fiber, T = [À]

Forward Voltage
= 50 mA
= 6 mA

Iß = 10 µA

Peak Wavelength
= 25 mA DC

Spectral Bandwidth
= 25 mA DC

Response Time
1 V Prebias, 50 mA peak

T = 10-90%
12 20

T = 90-10%
12 20

Analog Bandwidth
= 50 mA DC, small
signal sinusoidal modulation

PÞ Temperature Coefficient

More datasheets: LW020A7 | LW020A8 | LW020B871 | LW020F | LW020F87 | LW020A71 | LW020F1 | LW020A | LW020F871 | LW020A1

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived HFE4026-313/BBA Datasheet file may be downloaded here without warranties.

Datasheet ID: HFE4026-313/BBA 636463