GSCC36C

GSCC36C Datasheet

GSC

Part	Datasheet
GSCC36C	GSCC36C (pdf)

Related Parts	Information
GSCA36C	GSCA36C
GSCA01C	GSCA01C
GSCC01A1B	GSCC01A1B
GSCA01A1B	GSCA01A1B

PDF Datasheet Preview
PART NUMBER GS SERIES CHART 4 A 0099785 INITIAL RELEASE CHG'D BY APPROVED 2013-04-15 M. MARK SEE CONDUIT THREAD CHART SEE BASIC SWITCH CODE CHART SEE OPERATING HEAD CODE CHART SEE ROLLER MATERIAL CODE CHART SEE ROLLER ORIENTATION CODE CHART CONDUIT THREAD CHART CODE DESCRIPTION A 1/2-14 NPT CONDUIT THREAD B PG CONDUIT THREAD C M20 X CONDUIT THREAD D PF 1/2 CONDUIT THREAD CODE 01 03 04 06 07 33 34 36 BASIC SWITCH CODE CHART DESCRIPTION S.P.D.T.-SNAP ACTION S.P.D.T.-BREAK BEFORE MAKE S.P.D.T.-MAKE BEFORE BREAK S.P.D.T.-SLOW ACTION-2 NORMALLY CLOSED S.P.D.T.-SNAP ACTION-GOLD S.P.D.T.-BREAK BEFORE MAKE-GOLD S.P.D.T.-MAKE BEFORE BREAK-GOLD S.P.D.T.-SLOW ACTION-2 NORMALLY CLOSED-GOLD CODE A1 A5 B C D OPERATING HEAD CODE CHART DESCRIPTION SIDE ROTARY, FIXED LENGTH LEVER SIDE ROTARY, OFFSET LEVER TOP PIN PLUNGER TOP ROLLER PLUNGER TOP ROLLER LEVER CODE NONE ROLLER MATERIAL CODE CHART DESCRIPTION NO ROLLER PLASTIC ROLLER METAL ROLLER ROLLER ORIENTATION CODE CHART CODE DESCRIPTION BLANK BLANK = STANDARD ORIENTATION-ROLLER PARALLEL TO MOUNTING SURFACE, SWITCHING IN BOTH DIRECTIONS 1 SWITCHING CLOCKWISE ROTATION ONLY 2 SWITCHING COUNTER CLOCKWISE ROTATION ONLY 3 LEVER ON RIGHT 4 LEVER ON LEFT 5 LEVER TO MOUNTING SURFACE 6 HEAD ORIENTED WITH ROLLER PERPENDICULAR TO MOUNTING SURFACE 1 - RED EPOXY PAINT FINISHED ZINC DIE-CAST BODY AND STEEL COVER. BLACK EPOXY PAINT FINISHED ZINC DIE-CAST HEAD. 2 - FREE POSITION F.P. , OPERATING POINT, OVERTRAVEL O.T. AND PRE TRAVEL ALL TO EN50047. 3 - ANY STANDARD LISTING WITH SUFFIX 'RS" OR "FE" IS PERMITTED. 4 - DIMENSIONS ARE SHOWN AS MILLIMETERS OVER INCHES. INCH VALUES ARE SHOWN FOR REFERENCE ONLY.

PDF Datasheet Preview

PART NUMBER GS SERIES CHART 4

A 0099785

INITIAL RELEASE

CHG'D BY

APPROVED
2013-04-15

M. MARK

SEE CONDUIT THREAD CHART SEE BASIC SWITCH

CODE CHART SEE OPERATING HEAD

CODE CHART SEE ROLLER MATERIAL

CODE CHART SEE ROLLER ORIENTATION

CODE CHART

CONDUIT THREAD CHART

CODE DESCRIPTION

A 1/2-14 NPT CONDUIT THREAD

B PG CONDUIT THREAD

C M20 X CONDUIT THREAD

D PF 1/2 CONDUIT THREAD

CODE 01 03 04 06 07 33 34 36

BASIC SWITCH CODE CHART DESCRIPTION S.P.D.T.-SNAP ACTION S.P.D.T.-BREAK BEFORE MAKE S.P.D.T.-MAKE BEFORE BREAK S.P.D.T.-SLOW ACTION-2 NORMALLY CLOSED S.P.D.T.-SNAP ACTION-GOLD S.P.D.T.-BREAK BEFORE MAKE-GOLD S.P.D.T.-MAKE BEFORE BREAK-GOLD S.P.D.T.-SLOW ACTION-2 NORMALLY CLOSED-GOLD

CODE A1 A5 B C D

OPERATING HEAD CODE CHART DESCRIPTION SIDE ROTARY, FIXED LENGTH LEVER SIDE ROTARY, OFFSET LEVER TOP PIN PLUNGER TOP ROLLER PLUNGER TOP ROLLER LEVER

CODE NONE

ROLLER MATERIAL CODE CHART DESCRIPTION NO ROLLER PLASTIC ROLLER METAL ROLLER

ROLLER ORIENTATION CODE CHART

CODE DESCRIPTION

BLANK

BLANK = STANDARD ORIENTATION-ROLLER PARALLEL TO MOUNTING SURFACE, SWITCHING IN BOTH DIRECTIONS
1 SWITCHING CLOCKWISE ROTATION ONLY
2 SWITCHING COUNTER CLOCKWISE ROTATION ONLY
3 LEVER ON RIGHT
4 LEVER ON LEFT
5 LEVER TO MOUNTING SURFACE
6 HEAD ORIENTED WITH ROLLER PERPENDICULAR TO MOUNTING SURFACE
1 - RED EPOXY PAINT FINISHED ZINC DIE-CAST BODY AND STEEL COVER.

BLACK EPOXY PAINT FINISHED ZINC DIE-CAST HEAD.
2 - FREE POSITION F.P. , OPERATING POINT, OVERTRAVEL O.T. AND

PRE TRAVEL ALL TO EN50047.
3 - ANY STANDARD LISTING WITH SUFFIX 'RS" OR "FE" IS PERMITTED.
4 - DIMENSIONS ARE SHOWN AS MILLIMETERS OVER INCHES. INCH VALUES ARE SHOWN FOR

REFERENCE ONLY.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GSCC36C Datasheet file may be downloaded here without warranties.

Datasheet ID: GSCC36C 636451