EVN2000C

EVN2000C Datasheet

EVN2000 Series Limit Switch

Part	Datasheet
EVN2000C	EVN2000C (pdf)

Related Parts	Information
EVN2000A	EVN2000A
EVN2000D	EVN2000D
EVN2000B	EVN2000B

PDF Datasheet Preview
EVN2000 Series Limit Switch Features • Innovative wiring system featuring insulation displacement termination IDT • Integrated cable gland/cord grip • EN 50047 mounting compatible • Designed to meet switch requirement within EN 81-1 • Snap action basic switch with 4 mm air gap • IP 66/67 Enclosure rating, EN NEMA 1, 12, 13 • Direct opening of Normally Closed contacts conforming to IEC/EN 60947-5-1 annex K • Double insulated switch element • Compact plastic housing Benefits • Reduced wiring time, up to 50 % savings can be achieved • Provides a truly global product by removing the need for conduit or cable gland hardware • Meets globally accepted mounting standard • Meets switch requirements within “Safety rules for the construction and installation of elevators/lifts” • 1 Normally Closed, 1 Normally Open circuit conforming to EN 81-1 • Suitable for wet applications • Forced opening of the normally closed circuit in the event of contacts welding • No earth connection required, internal or external • Suitable where space is at a premium The EVN2000 series limit switch is an innovative product which has been developed to address a need highlighted by Original Equipment Manufacturers OEM , where “Ease of Wiring” is required. With the new design there is no need for access to the inside of the housing and therefore the housing cover, cover screws and gasket become obsolete. Furthermore, the integrated cable gland eliminates the need for additional conduit or cable gland hardware. ! WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet or catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Typical applications • Elevators and moving stairs • Scissor/platform lifts • Overhead doors • Material handling • Packaging machinery • Agricultural equipment ! WARNING IF USED IN APPLICATIONS CONCERNING HUMAN SAFETY • Only use NC direct opening “positive opening”/ “posi- tive break” contacts, identified by the symbol • Do NOT use flexible / adjustable actuators. Only use actuators designed for safety applications. • Do NOT defeat, tamper, remove, or bypass this switch. • Hazardous voltage, disconnect power before servicing. • Strictly adhere to all installation instructions. • Consult with local safety agencies and their require- ments when designing a machine-control link, interface and all control elements that affect safety. Failure to comply with these instructions could result in death or serious injury. EVN2000 Series Limit Switch Technical information Specifications Mechanical life Degree of protection: Operating temperature: Storage temperature: Standards/approvals: Electrical rating IEC/EN 60947-5-1 AC15, A300 DC13, Q300 Rated insulation voltage Dielectric Rated impulse withstand Polution degree Thermal current Short circuit withstand Contact material Circuit type: Cable/leadwire:

PDF Datasheet Preview

EVN2000 Series Limit Switch

Features
• Innovative wiring system featuring insulation
displacement termination IDT
• Integrated cable gland/cord grip
• EN 50047 mounting compatible
• Designed to meet switch requirement within EN 81-1
• Snap action basic switch with 4 mm air gap
• IP 66/67 Enclosure rating, EN NEMA 1, 12, 13
• Direct opening of Normally Closed contacts
conforming to IEC/EN 60947-5-1 annex K
• Double insulated switch element
• Compact plastic housing

Benefits
• Reduced wiring time, up to 50 % savings can be
achieved
• Provides a truly global product by removing the need
for conduit or cable gland hardware
• Meets globally accepted mounting standard
• Meets switch requirements within “Safety rules for the
construction and installation of elevators/lifts”
• 1 Normally Closed, 1 Normally Open circuit
conforming to EN 81-1
• Suitable for wet applications
• Forced opening of the normally closed circuit in the
event of contacts welding
• No earth connection required, internal or external
• Suitable where space is at a premium

The EVN2000 series limit switch is an innovative product which has been developed to address a need highlighted by Original Equipment Manufacturers OEM , where “Ease of Wiring” is required. With the new design there is no need for access to the inside of the housing and therefore the housing cover, cover screws and gasket become obsolete. Furthermore, the integrated cable gland eliminates the need for additional conduit or cable gland hardware.
! WARNING

MISUSE OF DOCUMENTATION
• The information presented in this product sheet or
catalogue is for reference only. DO NOT USE this document as product installation information.
• Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.

Sensing and Control

Typical applications
• Elevators and moving stairs
• Scissor/platform lifts
• Overhead doors
• Material handling
• Packaging machinery
• Agricultural equipment
! WARNING

IF USED IN APPLICATIONS CONCERNING HUMAN SAFETY
• Only use NC direct opening “positive opening”/ “posi-
tive break” contacts, identified by the symbol
• Do NOT use flexible / adjustable actuators. Only use
actuators designed for safety applications.
• Do NOT defeat, tamper, remove, or bypass this switch.
• Hazardous voltage, disconnect power before servicing.
• Strictly adhere to all installation instructions.
• Consult with local safety agencies and their require-
ments when designing a machine-control link, interface and all control elements that affect safety. Failure to comply with these instructions could result in death or serious injury.

EVN2000 Series Limit Switch

Technical information Specifications

Mechanical life Degree of protection:

Operating temperature:

Storage temperature:

Standards/approvals:

Electrical rating IEC/EN 60947-5-1

AC15, A300

DC13, Q300 Rated insulation voltage Dielectric Rated impulse withstand Polution degree Thermal current Short circuit withstand Contact material Circuit type:

Cable/leadwire:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EVN2000C Datasheet file may be downloaded here without warranties.

Datasheet ID: EVN2000C 636443