ASCX15DN-90

ASCX15DN-90 Datasheet

ASCX Series

Part	Datasheet
ASCX15DN-90	ASCX15DN-90 (pdf)

Related Parts	Information
ASCX05DN-90	ASCX05DN-90

PDF Datasheet Preview
Microstructure Pressure Sensors Signal Conditioned 0 psi to 1 psi up to 0 psi to 150 psi ASCX Series FEATURES • 5 Vdc Supply • High Level Voltage Output • Field Interchangeable • Calibrated and Temperature Compensated • Small Form Factor • Low Power • Offset Adjust TYPICAL APPLICATIONS • Medical Equipment • Industrial Controls • Pneumatic Controls WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. This series is a signal-conditioned version of Honeywell’s proven performer and industry leading SCX series sensor. This amplified ASCX device is in a package the same as the SCX but it offers a high level V span output on a very cost-effective basis. This family is fully calibrated and temperature compensated over a range of 0 °C to 70 °C [32 °F to 158 °F] but can be operated from -25 °C to 105 °C [-13 °F to 221 °F]. These sensors are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases. Devices are available to measure absolute, differential and gage pressures from 1 psi ASCX01 up to 150 psi ASCX150 . The absolute devices A have an internal vacuum reference and an output voltage proportional to absolute pressure. Differential devices D allow application of pressure to either side of the sensing diaphragm and can be used for gage or differential pressure measurements. The ASCX series devices feature an integrated circuit IC sensor element and laser trimmed thick film ceramic housed in a compact solvent resistant case. It provides excellent corrosion resistance and isolation to external packaging stresses. The package has convenient mounting holes and pressure ports for ease of use with standard plastic tubing for pressure connection. All ASCX devices are calibrated for span to within ± 1 % typically ± % of FSO. The devices are characterized for operation from a single 5 volt supply although sensitivity is ratiometric to the supply voltage and any dc supply from 5 Vdc to 16 Vdc is acceptable. The ACSX series requires very low quiescent current compared to other signal conditioned pressure sensors, thus, this series is ideal for batterypowered applications. The 100 microseconds response time makes this series an excellent choice for computer peripherals and pneumatic control applications. Contact your local honeywell representative, or go to Honeywell’s website at for additional details. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Microstructure Pressure Sensors Signal Conditioned 0 psi to 1 psi up to 0 psi to 150 psi ASCX Series PRESSURE RANGE SPECIFICATIONS Model * Operating Pressure Proof Pressure 2 ASCX01DN 0 psid to 1 psid 20 psid ASCX05DN 0 psid to 5 psid 20 psid ASCX15AN 0 psia to 15 psia 30 psia ASCX15DN 0 psid to 15 psid 30 psid ASCX30AN 0 psia to 30 psia 60 psia ASCX30DN 0 psid to 30 psid 60 psid ASCX100AN 0 psia to 100 psia 150 psia ASCX100DN 0 psid to 100 psid 150 psid ASCX150AN 0 psia to 150 psia 150 psia ASCX150DN 0 psid to 150 psid 150 psid * Ordering information Order model number. Sensitivity 3 Full-Scale Span 1 Min. Typ. Max. 4.5V/psi 0.9V/psi 0.3V/psi 0.3V/psi 0.15V/psi 0.15V/psi 45mV/psi 45mV/psi 30mV/psi 30mV/psi MAXIMUM RATINGS Characteristic Supply Voltage VS Output Current Source Sink Lead Soldering Temperature 2 seconds to 4 seconds Maximum Pressure On Any Port Quiescent Current Description Vdc to 16 Vdc 5 mA 3 mA 250 °C [482 °F] 150 psi 4 mA PARAMETER REFERENCE CONDITIONS Model Reference Conditions Supply Voltage ± Vdc Reference Temperature 25 °C [77 °F] Load Condition 200 kOhm Common Mode Pressure 0 psig ENVIRONMENTAL SPECIFICATIONS Characteristic Description Maximum Ratings All Devices Compensated Operating Temperature 0 °C to 70 °C [32 °F to 158 °F] Operating Temperature Storage Temperature -25 °C to 105 °C [-13 °F to 221 °F] -55 °C to 125 °C [-67 °F to 257 °F] 2 Honeywell • Sensing and Control Microstructure Pressure Sensors Signal Conditioned 0 psi to 1 psi up to 0 psi to 150 psi ASCX Series ASCX PERFORMANCE CHARACTERISTICS 4 Characteristic Offset 5 Models ASCX15/30/100/150xN Models ASCX01/05DN Min. Typ. Max. Unit Volts

PDF Datasheet Preview

Microstructure Pressure Sensors Signal Conditioned 0 psi to 1 psi up to 0 psi to 150 psi

ASCX Series

FEATURES
• 5 Vdc Supply
• High Level Voltage Output
• Field Interchangeable
• Calibrated and

Temperature Compensated
• Small Form Factor
• Low Power
• Offset Adjust TYPICAL APPLICATIONS
• Medical Equipment
• Industrial Controls
• Pneumatic Controls

WARNING

PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury.

This series is a signal-conditioned version of Honeywell’s proven performer and industry leading SCX series sensor.

This amplified ASCX device is in a package the same as the SCX but it offers a high level V span output on a very cost-effective basis. This family is fully calibrated and temperature compensated over a range of 0 °C to 70 °C [32 °F to 158 °F] but can be operated from -25 °C to 105 °C [-13 °F to 221 °F]. These sensors are intended for use with non-corrosive, non-ionic working fluids such as air and dry gases.

Devices are available to measure absolute, differential and gage pressures from 1 psi ASCX01 up to 150 psi ASCX150 . The absolute devices A have an internal vacuum reference and an output voltage proportional to absolute pressure. Differential devices D allow application of pressure to either side of the sensing diaphragm and can be used for gage or differential pressure measurements.

The ASCX series devices feature an integrated circuit IC sensor element and laser trimmed thick film ceramic housed in a compact solvent resistant case. It provides excellent corrosion resistance and isolation to external packaging stresses. The package has convenient mounting holes and pressure ports for ease of use with standard plastic tubing for pressure connection.

All ASCX devices are calibrated for span to within ± 1 % typically ± % of FSO. The devices are characterized for operation from a single 5 volt supply although sensitivity is ratiometric to the supply voltage and any dc supply from 5 Vdc to 16 Vdc is acceptable.

The ACSX series requires very low quiescent current compared to other signal conditioned pressure sensors, thus, this series is ideal for batterypowered applications.

The 100 microseconds response time makes this series an excellent choice for computer peripherals and pneumatic control applications.

Contact your local honeywell representative, or go to Honeywell’s website at for additional details.

WARNING

MISUSE OF DOCUMENTATION
• The information presented in this product sheet is for reference only. Do not
use this document as a product installation guide.
• Complete installation, operation, and maintenance information is provided in
the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury.

Sensing and Control

Microstructure Pressure Sensors

Signal Conditioned 0 psi to 1 psi up to 0 psi to 150 psi

ASCX Series

PRESSURE RANGE SPECIFICATIONS

Model *

Operating Pressure

Proof Pressure 2

ASCX01DN 0 psid to 1 psid
20 psid

ASCX05DN 0 psid to 5 psid
20 psid

ASCX15AN 0 psia to 15 psia 30 psia

ASCX15DN 0 psid to 15 psid 30 psid

ASCX30AN 0 psia to 30 psia 60 psia

ASCX30DN 0 psid to 30 psid 60 psid

ASCX100AN 0 psia to 100 psia 150 psia

ASCX100DN 0 psid to 100 psid 150 psid

ASCX150AN 0 psia to 150 psia 150 psia

ASCX150DN 0 psid to 150 psid 150 psid
* Ordering information Order model number.

Sensitivity 3

Full-Scale Span 1

Min.

Typ.

Max.
4.5V/psi 0.9V/psi 0.3V/psi 0.3V/psi 0.15V/psi 0.15V/psi 45mV/psi 45mV/psi 30mV/psi 30mV/psi

MAXIMUM RATINGS

Characteristic Supply Voltage VS Output Current

Source Sink Lead Soldering Temperature 2 seconds to 4 seconds Maximum Pressure On Any Port Quiescent Current

Description Vdc to 16 Vdc
5 mA 3 mA 250 °C [482 °F]
150 psi 4 mA

PARAMETER REFERENCE CONDITIONS

Model

Reference Conditions

Supply Voltage
± Vdc

Reference Temperature
25 °C [77 °F]

Load Condition
200 kOhm

Common Mode Pressure
0 psig

ENVIRONMENTAL SPECIFICATIONS

Characteristic

Description Maximum Ratings All Devices

Compensated Operating Temperature
0 °C to 70 °C [32 °F to 158 °F]

Operating Temperature Storage Temperature
-25 °C to 105 °C [-13 °F to 221 °F] -55 °C to 125 °C [-67 °F to 257 °F]
2 Honeywell
• Sensing and Control

Microstructure Pressure Sensors

Signal Conditioned 0 psi to 1 psi up to 0 psi to 150 psi

ASCX Series

ASCX PERFORMANCE CHARACTERISTICS 4

Characteristic Offset 5

Models ASCX15/30/100/150xN Models ASCX01/05DN

Min. Typ. Max.

Unit

Volts

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASCX15DN-90 Datasheet file may be downloaded here without warranties.

Datasheet ID: ASCX15DN-90 636418