38HM27

38HM27 Datasheet

38HM27

Part	Datasheet
38HM27	38HM27 (pdf)

PDF Datasheet Preview
ISSUE 15 02 APR 13 CHECK DRAWING NUMBER 38HM27 A 0002202 CSL 21 NOV 03 B 0099314 RKA 02 APR 13 RELEASE NO. PR-22227-T REPLACES - PLATE X THICK AT OPERATING POSITION AT EDGE OF ROLLER 2X R OPERATING POSITION & RELEASE POSITION C N.O. N.C. 2X WASHER OD, ID X THICK 3X NO.22 WIRE LEAD PER MIL-W-22759/11 MARKED WITH CIRCUIT IDENT AND WIRE GAGE C-22, NO-22 AND NC-22 PER MIL-W-5088 NOTES 1 CONTACT HONEYWELL - MICRO SWITCH IF ADDITIONAL INFORMATION ON LOW ENERGY LOADS IS REQUIRED OR FOR HELP WITH SPECIAL APPLICATION S 2 LIFE RATINGS PER MIL-PRF-8805 REQU IREMENTS. ACTUAL LIFE EXCEEDS RATED LIFE. CONTACT HONEYWELL - MICRO SWITCH FOR ADDITIONAL DATA 3 - SWITCH IS HERMETICALLY SEALED M ETAL-TO-METAL, GLASS-TO-METAL 4 2X NUT, SELF-LOCKING PER MS 2104 2-02 5 MAXIMUM ALLOWABLE ELECTRICAL RESISTANCE TO BE m MEASURED ACROSS SURFACES INDICAT ED 6 GRAIN DIRECTION 7 SEAT LOCKING NUTS AGAINST PLATE AT IN/LBS, PER MIL-N-25027 38HM27 SPECIFICATION DETAILS STANDARD: CONSTRUCTION ENCLOSURE DESIGN CONTACT MATERIAL & CONFIGURATION CIRCUIT CONFIGURATION TERMINATION WEIGHT EXPOSED METALS ELECTRICAL CHARACTERISTICS CONTACT ARRANGEMENT ELECTRICAL RATINGS CONFORMS TO MS27216-5 MIL-PRF-8805/8 EXCEPT AS NOTED HERMETIC SEAL PER MIL-PRF-8805, SYMBOL 5 SMOOTH SILVER CONTACTS GOLD PLATED LEADWIRES PER OZ MAX CORROSION RESISTANT STAINLESS STEEL S.P.D.T. VOLTAGE RESISTIVE LOAD INDUCTIVE LOAD -SEA LEVEL -70,000 FEET DIELECTRIC STRENGTH & INSULATION RES BASIC SWITCH -BETWEEN TERMINALS AND EXPOSED NON-CURRENT CARRYING METAL -BETWEEN TERMINALS OF MUTUALLY INSULATED CIRCUITS -BETWEEN ALL UNCONNECTED TERMINALS OF THE SAME POLE SWITCH RESISTANCE RECOMMENDATION FOR USE IN APPL LESS THAN amps AND/OR 12 volts MECHANICAL CHARACTERISTICS OPERATING FORCE RELEASE FORCE OVERTRAVEL 28 VDC 28 VDC 3 AMP 3 AMP

PDF Datasheet Preview

ISSUE 15
02 APR 13 CHECK

DRAWING NUMBER
38HM27

A 0002202

CSL 21 NOV 03

B 0099314

RKA 02 APR 13

RELEASE NO. PR-22227-T

REPLACES -

PLATE X THICK

AT OPERATING POSITION

AT EDGE OF ROLLER
2X R OPERATING

POSITION
& RELEASE

POSITION

C N.O. N.C.
2X WASHER OD, ID X THICK
3X NO.22 WIRE LEAD PER MIL-W-22759/11 MARKED WITH CIRCUIT IDENT AND WIRE GAGE C-22, NO-22 AND NC-22 PER MIL-W-5088

NOTES 1 CONTACT HONEYWELL - MICRO SWITCH IF ADDITIONAL INFORMATION

ON LOW ENERGY LOADS IS REQUIRED OR FOR HELP WITH SPECIAL APPLICATION S 2 LIFE RATINGS PER MIL-PRF-8805 REQU IREMENTS. ACTUAL LIFE EXCEEDS

RATED LIFE. CONTACT HONEYWELL - MICRO SWITCH FOR ADDITIONAL DATA 3 - SWITCH IS HERMETICALLY SEALED M ETAL-TO-METAL, GLASS-TO-METAL 4 2X NUT, SELF-LOCKING PER MS 2104 2-02 5 MAXIMUM ALLOWABLE ELECTRICAL RESISTANCE TO BE m

MEASURED ACROSS SURFACES INDICAT ED 6 GRAIN DIRECTION 7 SEAT LOCKING NUTS AGAINST PLATE AT IN/LBS, PER MIL-N-25027
38HM27

SPECIFICATION DETAILS STANDARD:

CONSTRUCTION ENCLOSURE DESIGN CONTACT MATERIAL & CONFIGURATION CIRCUIT CONFIGURATION TERMINATION WEIGHT EXPOSED METALS

ELECTRICAL CHARACTERISTICS CONTACT ARRANGEMENT ELECTRICAL RATINGS

CONFORMS TO MS27216-5 MIL-PRF-8805/8 EXCEPT AS NOTED

HERMETIC SEAL PER MIL-PRF-8805, SYMBOL 5 SMOOTH SILVER CONTACTS GOLD PLATED

LEADWIRES PER OZ MAX CORROSION RESISTANT STAINLESS STEEL

S.P.D.T. VOLTAGE

RESISTIVE LOAD

INDUCTIVE LOAD
-SEA LEVEL -70,000 FEET DIELECTRIC STRENGTH & INSULATION RES

BASIC SWITCH -BETWEEN TERMINALS AND EXPOSED

NON-CURRENT CARRYING METAL -BETWEEN TERMINALS OF MUTUALLY

INSULATED CIRCUITS -BETWEEN ALL UNCONNECTED TERMINALS

OF THE SAME POLE SWITCH RESISTANCE RECOMMENDATION FOR USE IN APPL LESS THAN amps AND/OR 12 volts MECHANICAL CHARACTERISTICS OPERATING FORCE RELEASE FORCE OVERTRAVEL
28 VDC 28 VDC
3 AMP 3 AMP

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 38HM27 Datasheet file may be downloaded here without warranties.

Datasheet ID: 38HM27 636366